Switching Power Supplies PS5R-V Series PRODUCT DESCRIPTION DIN-rail mount switching power supplies with global approvals for both industrial and hazardous locations KEY FEATURES * Compact size preserves panel space STANDARDS COMPLIANCE Mark Applicable Standards * Slim size (width): 22.5mm (10W/15W/30W) 36mm (60W/90W) 46mm (120W) 60mm (240W) File No. or Organization UL508 UL13101 ANSI/ISA 12.12.01 CSA C22.2 No.107.1 CSA C22.2 No.213 CSA C22.2 No.2231 UL/c-UL Listed File No. E467154, E177168 * Universal Voltage Input: 85-264V AC/100-370V DC TUV SUD EN60950-1 EN50178 EN61204-3 EN50581 * Wide operating temperature range EU Low Voltage Directive, EMC Directive RoHS Directive SEMI F47 -- * Spring-up terminals accept ring & fork terminals EPRI * Approved for use in Class I Division 2 hazardous locations Note 1: PS5R-VA/VB/VC/VD/VE only Note 2: EN60950-1, EN50178 only * Can be installed in 6 directions PART NUMBERS Output Capacity Output Current PS5R-VA05 5V 1.5A * Overcurrent protection with auto-reset 7.5W PS5R-VA12 12V 0.6A * Meets SEMI F47 Sag Immunity (208V AC input) PS5R-VA24 24V 0.3A 10W PS5R-VB05 5V 2.0A * RoHS compliant 12V 1.3A 24V 0.65A 12V 2.5A PS5R-VC24 24V 1.3A 60W PS5R-VD24 24V 2.5A 90W PS5R-VE24 24V 3.75A 120W PS5R-VF24 24V 5.0A 240W PS5R-VG24 24V 10.0A 30W PS5R-VB12 PS5R-VB24 PS5R-VC12 Input Voltage * 10W ~ 90W meet NEC Class 2 output ratings Output Voltage 15W Part Number 100 to 240V AC (Voltage range: 85 to 264V AC / 100 to 370V DC) Part Number Structure PS5R - V Output Capacity Output Voltage A: 7.5W 05: 5V3 B: 10W/15W 12: 12V4 C: 30W 24: 24V D: 60W E: 90W F: 120W Note 3: PS5R-VA/VB only G: 240W Note 4: PS5R-VA/VB/VC only Use only for interpreting part numbers. Do not use for developing part numbers. 1 * Five-year factory warranty SPECIFICATIONS Model 5V DC output 12V DC output PS5R-VA05 PS5R-VA12 24V DC output Output Capacity PS5R-VB05 PS5R-VB12 PS5R-VC12 - - - - PS5R-VA24 PS5R-VB24 PS5R-VC24 PS5R-VD24 PS5R-VE24 PS5R-VF24 PS5R-VG24 7.5W 15W (5V Model is 10W) 30W 60W 90W 120W 240W Rated Input Voltage (Single-phase two-wire)1 100 to 240V AC (Voltage range: 85 to 264V AC/100 to 370V DC) (Load 80% at 100-105V DC) Frequency Input Input Current (Typ.) Inrush Current (Typ.) (Ta=25C, cold start) Leakage Current Efficiency (Typ.) (at rated output)2 Power Factor (Typ.) 50/60 Hz 5V:0.25A 12V, 24V: 0.35A 5V:0.14A 12V, 24V: 0.19A 100V AC 5V: 0.20A 12V, 24V: 0.18A 230V AC 5V: 0.12A 12V, 24V: 0.10A 100V AC 15A 230V AC 120V AC 230V AC 36A 100V AC 5V: 74%, 12V: 79%, 24V: 80% 5V: 73%, 12V: 77%, 24V: 76% -- -- 5V: 77%, 12V: 82%, 24V: 84% 5V: 73%, 12V: 80%, 24V: 81% -- -- 12V: 83%, 24V: 85% 12V: 85%, 24V: 87% -- -- 86% 86% -- -- 0.86 0.99 0.92 0.96 5V/1.5A, 12V/0.6A, 24V/0.3A 5V/2.0A3, 12V/1.3A, 24V/0.65A 12V/2.5A, 24V/1.3A 24V/2.5A 24V/3.75A 24V/5A 24V/10A 5% 10% 45ms 5V: 53ms, 12V: 34ms, 24V: 36ms 12V: 13ms, 24V: 15ms 13ms 20ms 30ms 12V: 110ms 24V: 110ms 105ms 600ms max. 230V AC 100V AC 230V AC Rated Voltage/Current Output Holding Time 0.3A 285ms 500ms max. Rise Time (at rated input and output) 5V, 12V: 200ms max 24V: 250ms max 5V, 12V: 200ms max. 24V: 250ms max. Output Regulation Temperature Change Ripple (including noise) 0.6A 0.7A 1.2A 14A 41A 30A 89% 90% 88% 89% 30ms 800ms max. 33ms 40ms 700ms max. 800ms max. 0.05%/C max. (-25 to +55C ) 0.05%/C max. (-25 to +50C) 200ms max. 5V: 2.5% max. 12V, 24V: 1.0% max. 0.04%/C max. (-10 to 0.05%/C max. (-10 to +65C ) +65C ) 12V: 0.05%/C max. (-10 to +50C) 24V: 0.05%/C max. (-10 to +55C) 0.05%/C max. (-10 to +55C ) 1.0% max. 0.05%/C max. (-10 to +50C ) 5V: 8% p-p max. (-25 to -10C) 12V: 6% p-p max. (-25 to -10C) 24V: 4% p-p max. (-25 to -10C) 5V: 8% p-p max. (-25 to -10C) 12V: 6% p-p max. (-25 to -10C) 24V: 4% p-p max. (-25 to -10C) 12V: 6% p-p max. (-25 to -10C) 24V: 4% p-p max. (-25 to -10C) 4% p-p max. (-25 to -10C) 5V: 5% p-p max. (-10 to +0C) 12V: 2.5% p-p max. (-10 to +0C) 24V: 1.5% p-p max. (-10 to +0C) 5V: 5% p-p max. (-10 to +0C) 12V: 2.5% p-p max. (-10 to +0C) 24V: 1.5% p-p max. (-10 to +0C) 12V: 2.5% p-p max. (-10 to +0C) 24V: 1.5% p-p max. (-10 to +0C) 1.5% p-p max. (-10 to +0C) 5V: 2.5% p-p max. (0 to +65C) 12V: 1.5% p-p max. (0 to +65C) 24V: 1% p-p max. (0 to +65C) 5V: 2.5% p-p max. (0 to +65C) 12V: 1.5% p-p max. (0 to +65C) 24V: 1% p-p max. (0 to +65C) 12V: 1.5% p-p max. (0 to +50C) 24V: 1% p-p max. (0 to +55C) 1% p-p max. (0 to +55C) 105% min. (auto reset) 1% p-p max. (0 to +50C) 1% p-p max. (0 to +55C) 101% min. (auto reset) 1% p-p max. (0 to +50C) 105% min. (auto reset) LED (green) Operation Indicator Dielectric Strength 0.8A 0.4% max. Overcurrent Protection Between input and output terminals 3,000V AC, 1 minute Between input and ground terminals 2,000V AC, 1 minute Between output and ground terminals 500V AC, 1 minute Between input and output terminals: 100M min. (500V DC megger) Between input and ground terminals: 100M min. (500V DC megger) Insulation Resistance Operating Temperature4 (No freezing) -25 to +75C -25 to +70C -25 to +65C 20 to 90% RH Operating Humidity (no condensation) Storage Temperature (No freezing) -25 to +75C Storage Humidity (no condensation) 20 to 90% RH 10 to 55Hz, amplitude 0.33mm, 2 hours each in 3 axes (when used with BNL6 end clips) 10 to 55Hz, amplitude 0.375mm, 2 hours each in 3 axes (when used with BNL8 end clips) 10 to 55Hz, amplitude 0.375mm, 2 hours each in 3 axes (when used with BNL6 end clips) Vibration Resistance 10 to 55Hz, amplitude 0.21mm, 2 hours each in 3 axes (when used with BNL6 end clips) 10 to 55Hz, amplitude 0.375mm, 2 hours each in 3 axes (when used with BNL8 end clips) 10 to 55 Hz, amplitude 0.375mm, 2 hours each in 3 axes (when used with part no. BNL6 mounting clips) 300 m/s2 (30G), 3 times each in 6 directions Shock Resistance Expected Life5 EMC 2.7A 10% 500ms max. Input Fluctuation Load Fluctuation 1.4A 0.5mA max. 1.0mA max. Start Time (at rated input and output) 230V AC 1.1A 45A 5V: 330ms 12V: 215ms 24V: 230ms (Typ.) (at rated output) 1.3A 18A Adjustable Voltage Range 100V AC 0.7A 8 years minimum (at the rated input, 50% load, operating temperature +40C, standard mounting direction) EMI EN61204-3 (Class B) EMS EN61204-3 (industrial) UL508 (Listing), UL1310 Class 2, ANSI/ISA-12.12.01 CSA C22.2 No. 107.1, 213, 223 EN60950-1, EN50178 Safety Standards UL508 (Listing) ANSI/ISA-12.12.01 CSA C22.2 No. 107.1, 213 EN60950-1, EN50178 SEMI F47 (at 208V AC input only) Other Standard IP20 (EN60529) Degree of Protection Dimensions (mm) 75H x 45W x 70D Weight (approx.) 130g 90H x 22.5W x 95D 140g 95H x 36W x 108D 150g 260g M3.5 Terminal Screw *At normal temperature and humidity unless otherwise specified. Note 1: DC input voltage is not subject to safety standards. When using on DC input, connect a fuse to the input terminal for DC input protection. Note 2: Under stable state. Note 3: PS5R-VB05 (5V DC/2.0A) is 10W (Up to 3.0A at Ta = 0 to 40C. Not subject to safety standards above 2.0A.) Note 4: See the output derating curves. Note 5: Calculation of the expected life is based on the actual life of the aluminum electrolytic capacitor. The expected life depends on operating conditions. 2 310g 115H x 46W x 121D 125H x 60W x 125D 470g 960g CHARACTERISTICS Operating Temperature vs. Output Current (Derating Curves) Conditions: Natural air cooling (Operating temperature is the temperature around the switching power supply.) PS5R-VA05, -VA12, -VA24 PS5R-VB05, -VB12, -VB24 Mounting A,E 90 90 80 Output Current (%) 70 60 50 40 Mounting B, C, D, F 20 10 0 -30 -20 -10 0 10 20 30 40 50 60 Operating Temperature (C) 70 40 10 0 -30 -20 -10 50 30 Mounting D, E, F 10 0 -30 -20 -10 0 10 20 30 40 50 60 70 Operating Temperature (C) 90 70 60 70 80 50 40 30 20 Mounting B, C, D, E, F 10 0 -30 -20 -10 0 10 20 30 40 50 60 100 Mounting B, C, D Mounting A Mounting F 10 0 10 20 30 40 50 60 70 80 60 50 40 Mounting B, C, D, F 30 20 10 0 10 20 30 40 50 Mounting E 50 40 Mounting A Mounting F 10 0 10 20 30 40 50 60 70 Operating Temperature (C) 70 Output Current (%) Mounting B, D 60 80 Mounting B 60 50 40 Mounting C, D, F 30 20 10 0 -30 -20 -10 0 10 20 30 40 50 60 Operating Temperature (C) 70 80 Input Voltage vs. Output Current (Derating Curves) Ta=25C PS5R-VB05, -VB12, -VB24, -VC12, -VC24, -VD24, -VE24, -VF24 PS5R-VA05, -VA12, -VA24, -VG24 90 80 80 Output Current (%) 100 90 Output Current (%) 100 70 60 50 40 30 20 10 0 (ACV) 85 100 (DCV) 100 140 Input Voltage (V) 70 AC DC 60 50 40 30 20 10 0 (ACV) 85 100 (DCV)100 105 264 370 Input voltage (V) 264 370 Overcurrent Protection Characteristics PS5R-VA/VB/VC/VD/VF PS5R-VE24 100 100 95 Output Current (%) 100 105 and over Output Voltage (%) Output Voltage (%) Intermittent Operation Output Voltage (%) 0 -30 0 PS5R-VG24 100 95 Intermittent Operation 0 Intermittent Operation 0 0 Output Current (%) 100 101 and over 3 60 Operating Temperature (C) Mounting A 100 80 70 80 Mounting E 70 0 -30 -20 -10 80 Operating Temperature (C) 90 70 Mounting A 90 40 20 Input Voltage: 85-100V AC Operating Temperature (C) 50 30 60 PS5R-VE24 60 80 Output Current (%) 50 Input Voltage: 85-100V AC 0 -30 -20 -10 Mounting C, E 0 -30 -20 -10 40 70 PS5R-VG24 100 20 30 Mounting E 80 80 PS5R-VF24 30 20 90 Mounting C 40 20 10 100 Output Current (%) 60 0 Operating Temperature (C) Input Voltage: 85-100V AC 70 Mounting B, C, D, E, F 20 Mounting A, B 90 Output Current (%) 50 PS5R-VD24 100 80 80 60 30 Mounting A 90 Input Voltage: 85-100V AC 70 80 PS5R-VC24 100 Output Current (%) Output Current (%) 80 30 PS5R-VC12 Mounting A 100 Output Current (%) 100 0 Output Current (%) 100 105 and over 70 80 Operating Temperature Approved by Safety Standards UL508, CSA C22.2 No.107.1, ANSI/ISA12.12.01, EN60950-1, EN50178 Part Number Mounting A Mounting B Mounting C Mounting D Mounting E Mounting F PS5R-VA05, -VA12, -VA24 65 60 60 60 65 60 PS5R-VB05, -VB12, -VB24 65 60 60 60 60 60 PS5R-VC12 50 45 45 45 45 45 PS5R-VC24 55 55 50 45 45 45 PS5R-VD24 55 40 40 40 45 35 PS5R-VE24 50 40 40 40 45 40 PS5R-VF24 55 40 45 40 45 35 PS5R-VG24 50 35 30 30 45 30 MOUNTING STYLE Up Mounting B (Upright) Mounting A (Vertical, standard) Mounting C (Right side up) Mounting E (Upside down) Mounting D (Left side up) Mounting F (Downward) Front Panel PS5R-VA PS5R-VB/VC PS5R-VD/VE/VF PS5R-VG INP U T L Marking Name Description L, N AC Input Terminal Voltage range: 85 to 264V AC/100 to 370V DC Ground Terminal Be sure to connect this terminal to a proper ground. +V, -V DC Output Terminals +V: Positive output terminal -V: Negative output terminal VR.ADJ Output Voltage Adjustment Allows adjustment within 10%. (VE = 5%) Turning clockwise increases the output voltage. Turning counterclockwise decreases the output voltage. DC ON Operation Indicator (green) Illuminates when the output voltage is on. N INPUT 50/60Hz 100 -240 VAC DC ON ON VR. ADJ VR . ADJ OUTPUT -V +V O U TP U T ACCESSORIES Panel Mounting Bracket2 Applicable Switching Power Supply Part Number Remarks PS5R-VB PS5R-VC PS5R-VD PS5R-VE PS5R-VF PS9Z-5R1B PS9Z-5R2B -- For side mounting PS9Z-5R1C -- PS9Z-5R1E -- PS9Z-6R1F -- PS9Z-6R2F For side mounting PS5R-VG Note 2: Used when installing on a panel directly, PS5R-VA model does not require panel mounting bracket. DIN Rail (35mm-wide) Length Part Number Material 1000mm BNDN1000 Aluminum End Clip Part Number BNL6 BNL8 4 DIMENSIONS (MM) PS5R-VA PS5R-VA PS5R-VB/VC 5-M3.5 Screw Terminal 27.3 61.6 90 19.9 35.3 26 35 38.5 45 4.4 7.35 5 75 62.5 60 95 12.2 8.2 6 35.3 70 6-M3.5 Screw Terminal 3.8 9.5 22.5 PS5R-VD/VE PS5R-VF 108 8.5 5-M3.5 Screw Terminal 11.5 11.5 5-M3.5 Screw Terminal 121 35.3 4.5 98 115 35.3 95 79 44.9 24.9 8 10 10 3.8 20 36 4.5 3.8 23 46 3.8 PS5R-VG MTBF* 5.5 1 25 12 5 35 .3 10 6 .5 44 .9 9 .3 8-M3.5 Screw Terminal 9.5 9.5 PS5R-VA: 1,150,000H minimum PS5R-VB: 900,000H minimum PS5R-VC: 650,000H minimum PS5R-VD: 450,000H minimum PS5R-VE: 380,000H minimum PS5R-VF: 350,000H minimum PS5R-VG: 290,000H minimum MIL-HDBK-217FN2 (GB, 30C) 9.5 9.5 9.5 9.5 60 3 .8 4 .5 *MTBF stands for Mean Time Between Failure, which is calculated according to statistical device failures, and indicates reliability of a device. It is the statistical representation of the likelihood of the unit to fail and does not necessarily represent the expected life of a product. 5 When installed on switching power supply PS9Z-5R1B 13.6 Panel Mounting Bracket 12 24.7 12 PS9Z-5R2B Side-mount 16.4 Mounting hole layout when installing on a panel directly Front View 102 Mounting hole layout when installing on a panel directly 44 62.9 Side View 5.5 Front View 109.8 105 10.2 2-M4 or 2- o 4.5 holes 115 105 28.8 10.0 110 102.0 2-M4 or 2- o 4.5 holes PS9Z-5R1C 96.7 Side View 10.0 120 112 112 2-M4 or 2- o 4.5 holes 26 26 38 PS9Z-5R1E 9.9 Mounting hole layout when installing on a panel directly Front View Side View 10.2 122.8 125 135 125 2-M4 or 2- o 4.5 holes 10.5 4-M4 or 4- o 4.5 holes 130.6 10.5 145 145 135 135 28 Side View 10 PS9Z-6R1F Front View 9.9 36 36 48 Mounting hole layout when installing on a panel directly Mounting hole layout when installing on a panel directly 28 28 39 PS9Z-6R2F Side-mount 4-M4 or 4- o 4.5 holes 29.5 62.3 31 138.6 148.6 138.6 11.8 56 Side View Front View Mounting hole layout for side mounting 56 11.8 56 70 Side View 6 Back View Mounting Screws (4 -M3x6 countersunk screws) Mounting on DIN Rails SAFETY PRECAUTIONS The PS5R-V should be placed in a proper enclosure. It is designed to be used with general electrical equipment and industrial electric devices * Do not use switching power supplies with electric equipment whose malfunction or inadvertent operation may damage the human body or life directly. * Make sure that the input voltage and output current do not exceed the ratings. If the input voltage and output current exceed the ratings, electric shock, fire, or malfunction may occur. * Do not touch the terminals of the switching power supply while input voltage is applied, otherwise electric shock may occur. * Provide the final product with protection against malfunction or damage that may be caused by malfunction of the switching power supply. * Operating temperatures should not exceed the ratings. Be sure to note the derating characteristics. If the operating temperature exceeds the ratings, electric shock, fire, or malfunction may occur. * Blown fuses indicate that the internal circuits are damaged. Contact IDEC for repair. Do not just replace the fuse and reoperate, otherwise electric shock, fire, or malfunction may occur. * Do not use the switching power supplies to charge rechargeable batteries. * Do not overload or short-circuit the switching power supply for a long period of time, otherwise the internal elements may be damaged. * Do not disassemble, repair, or modify the power supplies, otherwise the high voltage internal part may cause electric shock, fire, or malfunction. * The fuse inside the PS5R-V switching power supply is for AC input. Use an external fuse for DC input. 1. Use a 35mm-wide DIN rail. 2.Place the PS5R-V on the DIN rail as shown with input terminal side up (), and press the PS5R-V towards the DIN rail (). Make sure that the PS5R-V is installed firmly. 3. Use BNL6 end clips to ensure power supplies do not slide off the end of the DIN rail. Use of BNL8 end clips is recommended when excessive vibration or shock is anticipated. Removal * Insert a flat screwdriver into the slot in the clamp, and pull out until it clicks (). The lock mechanism is released and the PS5R-V can be removed (). When mounting the PS5R-V again, push in the latch first. Mounting Removal Clamp Installing a Panel Mounting Bracket Panel Mounting Bracket (PS9Z-5R1, PS9Z-6R1F) Tab Slot Push in the latch to LOCK position. LOCK OPERATING INSTRUCTIONS Notes for installation Power Supply * Do not close the top or bottom openings of the PS5R-V to allow for heat radiation by convection. * When mounting multiple PS5R-V switching power supplies side by side, maintain a minimum of 10 mm clearance. Observe the derating curves in consideration of the ambient temperature. UNLOCK Latch Install the tab on the panel mounting bracket into the slot on the power supply. Install the brackets as shown on the left. Ensure that the panel mounting bracket is locked by the latch. LOCK 10mm minimum * When the derating voltage may exceed the recommended value, provide forced air-cooling. * Make sure to wire the ground terminal correctly. * For wiring, use wires of heat resistance of 60oC or higher (PS5R-VB: 80oC or higher). Use copper wire of the following sizes, according to the rated current. Terminal Wire Size (allowable current) Input AWG 18 to 14 Output AWG18 to 14 (AWG18: 7A, AWG16: 10A, AWG14: 15A) Panel Mounting Bracket (PS9Z-5R2B) LOCK Wire Type Tab Copper Solid/Stranded UNLOCK Power Supply Latch Cross-Sectional are AWG18: 0.82mm 2, AWG16: 1.31mm 2, AWG14: 2.0mm 2 Applicable crimp terminal (reference) o3.6min. 6.6 max. 4 max. Pull out the latch to UNLOCK position. Insert the tab on the panel mounting bracket into the slot on the power supply. Push in the latch to LOCK position. 5.5 min. * Recommended tightening torque of the input and output terminals is 1.0 to 1.3Nm (0.8N*m for UL). Ensure that the panel mounting bracket is locked by the latch. LOCK 7 Installing PS9Z-6R2F Side-mount Panel Mounting Bracket Install the bracket on the switching power supply using four M3 x 6 countersunk screws supplied with the bracket. Recommended tightening torque is 0.5 to 0.6N.m (should be in the center positions) * DC input operation is not subject to safety standards. Rust and Scratches on Metal parts Bonded metal parts are used for the PS5R-V. Rust on the edge and scratches on the surfaces may be developed depending on the storage condition, but the performance of the PS5R-V is not affected. Noise Small acoustic noise inside the PS5R-V may be heard depending on the input voltage and load, but the performance of the PS5R-V is not affected. Series Operation Series operation is allowed. Connect Schottky barrier diodes D as shown below. Select a Schottky diode in consideration of the rated current. The diode's reverse voltage must be higher than the PS5R-V's output voltage. L L +V N N -V Load L N +V -V Load L L +V N N -V L N +V -V Load Adjustment of Output Voltage The output voltage can be adjusted within 10% (VE: 5%) of the rated output voltage by using the VR.ADJ control on the front. Turning the VR.ADJ clockwise increases the output voltage. Turning the VR.ADJ counterclockwise decreases the output voltage. Overcurrent Protection The output voltage drops automatically when an overcurrent flows due to an overload or short circuit. Normal voltage is automatically restored when the load returns to normal conditions. Insulation/Dielectric Test When performing an insulation/dielectric test, short-circuit the input (between L and N) and output (between +V and -V). Do not apply or interrupt the voltage quickly, otherwise surge voltages may be generated and the PS5R-V may be damaged. Notes for Operation * Output interruption may indicate blown fuses. Contact IDEC. * The PS5R-V switching power supply contains an internal fuse for AC input. When using DC input, install an external fuse. To avoid blown fuses, select a fuse in consideration of the rated current of the internal fuse. (b) (a) Parallel Operation Parallel operation is not possible to increase the output capacity, because the internal elements and load may be damaged. Backup Operation Backup operation is a connection method of two switching power supplies in parallel for emergency. Normally one switching power supply has a sufficient output. If one switching power supply fails, another one operates to continue the output. Make sure that the sum of power consumption by load and diode is not greater than the rated wattage (rated voltage x rated current) of one switching power supply. D AC IN OUT - IN OUT - Load D Rated Current of Internal Fuses Part Number Internal FuseRated Current PS5R-VB/VC 2A PS5R-VD/VE/VF 4A PS5R-VG Select a diode in consideration of: Diode's current must be more than double the PS5R-V's output current. Take heat dissipation into consideration. 6.3A * Avoid overload and short-circuit for a long period of time, otherwise the internal elements may be damaged. WARRANTY IDEC warranties the PS5R-V switching power supply for a period of five years from the date of shipment. Scope IDEC agrees to repair or replace the PS5R-V switching power supply if the product has been operated under the following conditions. The maximum value of output capacity is within the range shown in "Operating Temperature vs. Output Current on page 3. 1. Average operating temperature (ambient temperature of switching power supply) is 40C maximum. 2. The load is 80% maximum. 3. Input voltage is the rated input voltage. 4. Standard mounting style IDEC shall not be liable for other damages including consequential, contingent or incidental damages. Warranty does not apply if the PS5R-V switching power supply was subject to: 1. Inappropriate handling, or operation beyond specifications. 2. Modification or repair by other than IDEC. 3. Failure caused by other than the PS5R-V switching power supply. 4. Failure caused by natural disasters. IDEC Corporation * 1175 Elko Drive * Sunnyvale, CA 94089 * 800-262-IDEC (4332) * Fax: 408-745-5258 * www.IDEC.com/usa (c)2016 IDEC Corporation. All Rights Reserved. PS9Y-DS500-2 12/16 5K 1612211733