CPC1231N Single-Pole, Normally Closed 4-Pin SOP OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Rating 350 120 30 Units VP mArms / mADC Features * 0.4mm Distance Through Insulation (Supplementary Isolation Requirement of EN60950) * 1500Vrms Input/Output Isolation * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Small 4-Pin SOP Package * Machine Insertable, Wave Solderable * Tape & Reel Version Available Description The CPC1231N is a miniature single-pole, normally closed (1-Form-B) solid state relay in a 4-pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input-to-output isolation. The optically coupled outputs, which use patented OptoMOS architecture, are controlled by a highly efficient GaAIAs infrared LED. The device is compliant with supplementary isolation in accordance with EN/IEC 60950-1. IXYS Integrated Circuits Division's state of the art double molded vertical construction packaging enables the CPC1231N to be one of the world's smallest 4-pin relays, which offers board space savings approaching 20% over the competitor's larger 4-pin SOP relay. Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Approvals * UL 1577 Approved Component: File E76270 * CSA Certified Component: Certificate 1172007 * EN 60950 Certified Component: TUV Certificate B 10 05 49410 006 Ordering Information Part # CPC1231N CPC1231NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control - Control 1 4 3 2 Load Load Switching Characteristics of Normally Closed Devices Form-B IF ILOAD 90% 10% toff Pb DS-CPC1231N-R07 ton e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION CPC1231N Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Capacitance, Input to Output Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 350 5 50 1 150 400 1 1500 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW pF Vrms C C Derate linearly 3.33 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate 3 Input Voltage Drop Reverse Input Current 1 2 3 2 Conditions Symbol Min Typ Max Units t =10ms IL=120mA IF=2mA, VL=350VP IL ILPK RON ILEAK - 25 - 120 350 30 5 mArms / mADC mAP A VL=50V, f=1MHz ton toff COUT - 25 2 2 - IL=120mA IF=5mA VR=5V IF VF IR 0.9 - 0.6 1.2 - 2 1.4 10 IF=5mA, VL=10V ms pF mA V A Load current derates linearly from 120mA @ 25oC to 80mA @ 85oC. Measurement taken within 1 second of on-time. For applications requiring high temperature operation (greater than 60C) a LED drive current of 5mA is recomended. www.ixysic.com R07 INTEGRATED CIRCUITS DIVISION CPC1231N PERFORMANCE DATA* Device Count (N) Device Count (N) 30 25 20 15 10 25 25 20 20 Device Count (N) 35 Typical Turn-On Time (N=50, IF=5mA, IL=120mA, TA=25C) Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) 15 10 5 5 0 0 LED Forward Voltage Drop (V) Typical IF for Switch Operation (N=50, IL=120mA, TA=25C) Typical IF for Switch Dropout (N=50, IL=120mA, TA=25C) 1.23 0.21 1.25 25 20 15 10 5 0 0.22 0.26 0.50 0.55 0.60 0.65 LED Current (mA) 0.70 5 0.50 0.60 0.70 0.80 0.90 1.00 1.10 Turn-Off (ms) Typical On-Resistance Distribution (N=50, IL=120mA, TA=25C) 35 30 20 15 10 5 25 20 15 10 5 0 0 0.45 10 0.27 Device Count (N) 1.21 Device Count (N) Device Count (N) 25 1.19 15 0 0.23 0.24 0.25 Turn-On (ms) 1.17 Typical Turn-Off Time (N=50, IF=5mA, IL=120mA, TA=25C) 0.75 0.45 0.50 0.55 0.60 0.65 LED Current (mA) 0.70 23.5 0.75 24 24.5 25 25.5 26 26.5 On-Resistance (:) Typical Blocking Voltage Distribution (N=50, TA=25C) 35 Device Count (N) 30 25 20 15 10 5 0 395 400 405 410 415 420 425 Blocking Voltage (VP) 0.6 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 0.5 Turn-Off (ms) 1.6 Turn-On (ms) LED Forward Voltage Drop (V) 0.7 1.8 Typical Turn-Off vs. LED Forward Current (IL=120mA) Typical Turn-On vs. LED Forward Current (IL=120mA) Typical LED Forward Voltage Drop vs. Temperature 0.4 0.3 0.2 0.1 0.8 0 -40 -20 0 20 40 60 Temperature (C) 80 100 120 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R07 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1231N IF=10mA IF=5mA -20 0 40 20 40 60 80 100 3.0 2.5 IF=5mA -40 -20 0 20 40 60 80 0 100 -40 -20 0 20 40 60 Typical On-Resistance vs. Temperature (IF=0mA, IL=120mA) Typical Load Current vs. Load Voltage (IF=0mA, TA=25C) Maximum Load Current vs. Temperature (IF=0mA) 15 50 0 -50 -100 20 40 60 80 100 Temperature (C) -2 0 2 Load Voltage (V) Typical Blocking Voltage vs. Temperature Typical Leakage vs. Temperature Measured Across Pins 3&4 (IF=2mA, VL=350V) 0.014 415 0.012 410 405 400 -4 4 0 20 40 60 Temperature (C) 80 100 60 40 0.010 0.008 0.006 0 -40 -20 0 20 40 -20 0 20 40 60 80 Energy Rating Curve 0.002 390 80 Temperature (C) 0.004 395 100 -40 6 Load Current (A) 420 Leakage (PA) 0.016 120 120 0 -6 425 100 140 20 -150 0 100 160 Load Current (mA) Load Current (mA) 20 80 180 150 25 -20 1.0 Temperature (C) 30 -40 1.5 0.5 IF=10mA 100 -20 2.0 Temperature (C) 35 -40 Typical IF for Switch Operation vs. Temperature (IL=50mA) Temperature (C) 10 Blocking Voltage (VP) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 LED Current (mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -40 On-Resistance (:) Typical Turn-Off vs. Temperature (IL=50mA) Typical Turn-On vs. Temperature (IL=50mA) Turn-Off (ms) Turn-On (ms) PERFORMANCE DATA* 60 Temperature (C) 80 100 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R07 INTEGRATED CIRCUITS DIVISION CPC1231N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1231N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1231N 260C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R07 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1231N MECHANICAL DIMENSIONS CPC1231N 4.089 0.203 (0.161 0.008) Recommended PCB Land Pattern 0.200 0.025 (0.008 0.001) 0.60 (0.0217) 6.096 0.102 (0.240 0.004) 3.810 0.076 (0.150 0.003) 0.432 0.127 (0.017 0.005) 5.60 (0.2205) 1.02 0.025 (0.040 0.001) Pin 1 2.54 Typ (0.100 Typ) 1.30 (0.0512) 2.184 Max (0.086 Max) 2.54 (0.10) Lead to package standoff: 0.0637 0.0383 (0.0025 0.0015) 0.762 0.102 (0.030 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) CPC1231NTR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 (0.472) B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossed Carrier Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1231N-R07 (c)Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/16/2012