Phototransistor Type Photocoupler H11A1 thru H11A5 Series Features Package Dimensions High input-output isolation voltage ( VISO = 5,000Vrms ) Current transfer ratio ( CTR : MIN. 10% at IF = 10mA, VCE = 10V ) UL approved ( No. E113898 ) VDE approved ( No. 094722 ) FIMKO approved ( No.209049 ) SEMKO approved ( No. 9943380/01-20 ) NEMKO approved ( No. P99102464 ) DEMKO approved ( No. 99-04182 ) CSA approve in progress Options Available : - Leads with 0.4" (10.16mm) Spacing (M Type) - Lead Bends for Surface Mounting (S Type) - Tape and Reel of Type I for SMD (Add "-TA" Suffix) - Tape and Reel of Type II for SMD (Add "-TA1" Suffix) - VDE 0884 Approvals (Add "-V" Suffix) 1. General Purpose Switching Circuits 2. Interfacing and coupling systems of different potentials and impedances 3. Monitor and detection circuits NOTES : 1. Year date code. 2. 2-digit work week. 3. Factory code shall be marked (Z Taiwan, Y Thailand). 4. Model No.: H11A1 ; H11A2 ; H11A3 ; H11A4 ; H11A5 5. All dimensions are in millimeters (inches). 6. Tolerance is 0.25mm (.010") unless otherwise noted. 7. Specifications are subject to change without notice. PHOTOCOUPLER Applications 12-157 Ordering Information Part Number H11A1 H11A1M H11A1S H11A1S-TA H11A1S-TA1 H11A2 H11A2M H11A2S H11A2S-TA H11A2S-TA1 H11A3 H11A3M H11A3S H11A3S-TA H11A3S-TA1 H11A4 H11A4M H11A4S H11A4S-TA H11A4S-TA1 H11A5 H11A5M H11A5S H11A5S-TA H11A5S-TA1 H11A1-V H11A1M-V H11A1S-V H11A1STA-V H11A1STA1-V H11A2-V H11A2M-V H11A2S-V H11A2STA-V H11A2STA1-V H11A3-V H11A3M-V H11A3S-V H11A3STA-V H11A3STA1-V H11A4-V H11A4M-V H11A4S-V H11A4STA-V H11A4STA1-V H11A5-V H11A5M-V H11A5S-V H11A5STA-V H11A5STA1-V 12-158 Package 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type 6-pin (tape and reel packaging of type 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type 6-pin (tape and reel packaging of type 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type 6-pin (tape and reel packaging of type 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type 6-pin (tape and reel packaging of type 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type 6-pin (tape and reel packaging of type 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type 6-pin (tape and reel packaging of type 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type 6-pin (tape and reel packaging of type 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type 6-pin (tape and reel packaging of type 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type 6-pin (tape and reel packaging of type 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type 6-pin (tape and reel packaging of type Safety Standard Approval I) II) UL approved FIMKO approved SEMKO approved DEMKO approved NEMKO approved CSA approve in progress H11A3 I) II) H11A4 I) II) H11A5 I) II) I) II) I) II) I) II) I) II) H11A1 H11A2 I) II) I) II) Application part number H11A1 VDE approved H11A2 H11A3 H11A4 H11A5 Ratings and Characteristics Absolute Maximum Ratings (Ta=25 ) Parameter Input Output Symbol Rating Unit Forward Current IF 60 mA Reverse Voltage VR 6 V Power Dissipation P 100 mW Collector-Emitter Voltage VCEO 30 V Emitter-Collector Voltage VECO 7 V Collector-Base Voltage VCBO 70 V IC 150 mA mW Collector Current PC 150 Ptot 250 mW V iso 5,000 Vrms Operating Temperature Topr -55~+100 Storage Temperature Tstg -55~+150 Tsol 260 Collector Power Dissipation Total Power Dissipation *1.Isolation Voltage *2.Soldering Temperature *1. AC for 1 minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 seconds Absolute Maximum Ratings (Ta=25 Symbol Input Reverse Current IR Terminal Capacitance Ct Collector Dark Current Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Base Breakdown Voltage Collector-Emitter Capacitance Collector-Base Capacitance Output Emitter-Base Capacitance Transfer Characteristics IC *1. CTR= I F unit 1.5 V 50 Conditions IF=10mA A 10 18 VR=6V pF V=0, f=1MHz nA 30 V BVECO 7 V BVECO 70 V VCE=10V, IF=0 IC=0.1mA, IF=0 IE=10 A IF=0mA IC=0.1mA, IF=0 V=0V, f=1MHz C CE 12 pF C CB 17 pF VCB=0V, f=1MHz CEB 25 pF VEB=0V, f=1MHz % IF=10mA VCE=10V 50 20 CTR 20 H11A4 10 H11A5 30 Collector-emitter Saturation Voltage Max. 1.2 I CEO H11A2 H11A3 Typ. BVCER H11A1 *1 Current Transfer Ratio Min. VF Forward Voltage PHOTOCOUPLER Parameter ) 0.15 V CE(sat) 0.4 V G 100 IF=10mA, IC=0.5mA DC500V 40~60% R.H. V=0, f=1MHz Isolation Resistance R iSO Floating Capacitance Cf 0.3 pF Response Time (Rise) tr 2.8 s VCC=10V, IC=10mA Response Time (Fall) tf 4.5 s RL=100 100% 12-159 Typical Electrical/Optical Characteristic Curves (25 Ambient Temperature Unless Otherwise Noted) 12-160 12-161 PHOTOCOUPLER