3
Scotchlok™Terminals
MNG18-156DM, MNG14-156DM,
MNG10-156DM
Male Snap Plug, Nylon Insulated
with Insulation Grip
Data Sheet
Specifications
Wire Size: See Table Above
Barrel Seam: Butted with Insulation
Grip
Maximum Voltage Rating: 600 V Building Wire
1000 V Signs or
Fixtures (Luminaires)
Maximum Operating Temp: 221˚F (105˚C)
Maximum Current: Same as Wire
Insulator Material: Nylon
Terminal Material: Brass
Insulation Grip Material: Brass
Plating: Tin
Installation Information
UL Listed and CSA Certified for use on stranded copper
(AWG) wire only.
Strip away the end 3/8 inch of wire insulation.
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style), or
TR-482, TR-490 (ratchet style) hand tools.
L
S
CANADIAN STANDARDS
ASSOCIATION
STANDARD NO. 22.2
NO. 0, 65
3M FILE NO. LR22190
WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electr ical codes.
Barrel Crimp (Electrical)
Insulation Crimp (Mechanical)
UNDERWRITERS
LABORATORIES
STANDARD NO. UL 486A
3M FILE NO. E23438
rebmuNtcudorP egnaReriW )GWA(
panSgnitaM retemaiD SL lerraB htgneL lerraB .D.I
mumixaM noitalusnI retemaiD
MD651-81GNM81-22651.058.091.0070.0541.0
MD651-41GNM41-61651.078.091.0090.0071.0
MD651-01GNM01-21651.049.022.0551.0052.0
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd Litho in USA.
© 3M 2002 78-8126-0390-6-A
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asser ted.
Engineering Specification
Crimp-Type Snap Plug Connectors shall, electrically
and mechanically, connect permanently to a pre-
stripped end of a stranded copper wire; and have a
round tongue portion for mating to a Snap Receptacle
in a separable, reusable manner.
The connector line shall offer tongue variations sized
to grip male tabs 0.156˝ and 0.180˝ diameter and bar-
rel variations in wire (AWG) size (22-18, 16-14,
12-10) and construction (vinyl insulated, nylon insu-
lated with insulation grip). The separable connectors
shall have regulatory agency coverage (UL Listed,
CSA Certification).
The nylon insulated 0.156˝ Male Snap Plug shall be
tin-plated 0.030˝ thick copper, with a tongue tapered
from 0.156˝ diameter and with a tin-plated brass, fun-
nel entry insulation grip, covered by a molded nylon
sleeve, color coded and sized for a specified (AWG)
wire range (22-18, 16-14, 12-10).
Insulated separable connectors shall be UL Listed and
CSA Certified for 600 V building wire: 1000 V signs
or lighting fixtures (luminaires) and temperature rated
221˚F (105˚C) maximum.
The separable connector formed by the paired Male
Snap Plug and Female Snap Receptacle may require a
suitable strain relief to prevent accidental separation.
3M and Scotchlok are trademarks of 3M.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
