REV. Status} Power Inductor for switch mode power supplies REVISION Eradt 03/13/00 TS A. Electrical Specifications (@20C) 1. Rated DC Current: 7A 2. Inductance: 7SwHt20% @ 20KHz 1V DC 7A 3. DC Resistance: 35mQ MAX Country of origin MODEL NUMBER IRS33| Schematic Diagram; | | 2 Mechanical Specifications; 19.00(0.748)MAX -| 33.00(1.299)MAX [ eooosuee 25.00+45.0(0.980)TYP WIRE INSULATION 2 SOLDER COATED 2 PLACES %1.30(0.051) 2 PLACES PREPARED BY: D. Rund ENGINEER: DWG CONTROL NO.| REV PA419386 POWER INDUCTOR FOR RS3-3 T. Shiozawa ACAD\MISCX\A41 23861 .DWG _ SWITCH MODE POWER SUPPLIES QUALITY CONTROL: CoNTENTS OF THIS DRAWING ARE| TAMURA CORPORATION OF AMERICA MODEL SPECIFICATION SUBJECT TO CHANGE WITHOUT _ D. Kelley PRIOR NOTICE 43352 EINES PARK DRIVE, MES SAosaee 6624 DM: mm(In} SCL: NONE | SH: 10F 1 APPROVED: PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH TAMURA RETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFACTURE AND SALE. THIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN D. Kelley CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING.