PCB KEY SWITCHES MICON 5 Tactile switches MICON 5 - Tactile switches MICON 5 - Plungers round, not illuminable - NEW - MICON 5 - Plungers round, ring illumination MICON 5 - Plungers square, illuminable - NEW - MICON 5 - Plungers square, spot-illumination MICON 5 - Plungers for signal indicator 4 4-3 4-5 4 - 10 4 - 14 4 - 17 4 - 22 4 - 26 4 - 31 RACON Tactile switches RACON 8 - Tactile switches RACON 12 - Tactile switches RACON 12 V - Tactile switches with vertical adapter RACON 12 i - Tactile switches RACON 8/12 - Special accessories RK 90 II, Key cap system for RACON 12 4 4 4 4 4 4 RF Tactile switches RF 15 - Tactile switches RF 15 N - Tactile switches RF 15 R low - Tactile switches RF 15 H - Tactile switches RF 15 - Signal indicators RF 19 - Tactile switches RF 19 H - Tactile switches RF 19 - Signal indicators RF 15/19 - Special accessories 4 4 4 4 4 4 4 4 4 - 33 39 45 47 49 52 4 - 55 - 58 62 67 73 78 81 86 91 95 4 - 101 KN 19 Short-travel main switch KN 19 - Short-travel main switches 4 - 103 RK 90 Keycaps RK 90 - Keycaps, plastic, 9 x 9 mm RK 90 - Keycaps, plastic 14 mm RK 90 - Keycaps, aluminium, 14 mm RK 90 - Special accessories 4 - 109 4 - 111 4 - 115 4 - 118 4 - 105 RG 85 III Short-travel system RG 85 III - Pushbuttons/keys RG 85 III - Keylock switches RG 85 III - Signal indicator, without lens RG 85 III - Special accessories 4 - 121 RS 76 Full-travel key switches RS 76 M - Full-travel key switches, non-illuminated RS 76 M - Full-travel key switches, illuminated RS 76 C - Full-travel key switches, non-illuminated RS 76 C - Full-travel key switches, illuminated RS 76 - Keycaps, non-illuminated RS 76 - Keycaps, illuminated RS 76 - Keycaps, with legend, two-shot molded/keycap sets RS 76 - Special accessories 4 - 143 Keylock / rotary switches for PCB MICROMEC - Keylock switches IP 54 EUROLOCKS - Keylock switches IP 54 Priority keylock switches IP 54 Rotary switches IP40 4 4 4 4 4 4 4 4 4 4 4 4 - 125 128 131 133 150 153 156 158 161 163 166 168 4 - 171 4 4 4 4 - 173 177 179 181 PCB KEY SWITCHES MICON 5 - TACTILE SWITCHES MICON 5 Tactile switches Tactile switch range MICON 5, with clear key click and extremely reliable switching. Use under overlay or under keycaps RK 90. THT and SMT versions which can be mounted automatically. All products are RoHS compliant. 4 MICON 4-3 PCB KEY SWITCHES MICON 5 - TACTILE SWITCHES Content MICON 5 - Tactile switches MICON 5 - Tactile switch, SMT Standard MICON 5 - Tactile switch, SMT low MICON 5 - Tactile switch, THT Standard 4 4 4 4 - 5 8 8 9 MICON 5 - Plungers round, not illuminable MICON 5 - Plunger opaque, round, not illuminable 4 - 10 4 - 12 MICON 5 - Plungers round, ring illumination MICON 5 - Plunger round, ring illumination 4 - 14 4 - 16 MICON 5 - Plungers square, illuminable MICON 5 - Plunger square, illuminable, 11 x 11 mm MICON 5 - Plunger square, illuminable, 14.5 x 14.5 mm MICON 5 - Plunger square, illuminable, 18 x 18 mm 4 - 17 4 - 19 4 - 19 4 - 20 MICON 5 - Plungers square, spot-illumination MICON 5 - Plunger square, spot-illumination, plunger 14.5 x 14.5 mm MICON 5 - Plunger square, spot-illumination, plunger 18 x 18 mm 4 - 22 4 - 24 4 - 24 MICON 5 - Plungers for signal indicator MICON 5 - Plunger for signal indicator, 1-module MICON 5 - Plunger for signal indicator, 2-module 4 - 26 4 - 28 4 - 28 4 MICON 4-4 PCB KEY SWITCHES MICON 5 - TACTILE SWITCHES MICON 5 Tactile switches MICON 5 tactile switches offer an extremely high switching reliability while needing very little space. They can be arranged as single keys, in rows or key blocks. When arranged under an overlay, MICON key switches should be combined with plungers. The features at a glance: s Suitable for the most common soldering methods - Wave soldering bath for THT versions - Reflow soldering for SMT version - Vapour phase soldering for SMT versions - Manual soldering s SMT version suitable for processing with an automatic SMT assembly machines s IMDS listed You can download actual product information from our internet site www. rafi.de / Catalogues and Downloads Technical Data Dimensions Length of housing Width of housing Overall height 6.4 mm 5.1 mm see order block Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination soldering see order block snap-action contact 1 NO Au no Mechanical characteristics Operating force F1 (20%) Switching travel S2 (0.15 mm) see order block see order block Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new Rated voltage restistance AC Insulation resistance 0.02 V 35 V 0.01 mA 100 mA 1W 100 mE 250 V 109 E Other specifications Ambient temp. operating min. Ambient temp. operating max. Resistance to environment Operating life (test force) Solder heat resistance / Solderability Flammability of materials Packing Produkt type ROHS compliant REACH compliant -40 C +90 C IEC 60068-2 -14,-30,-33, -78 see order block see order block UL 94 V1 see order block see order block yes yes 4 MICON 4-5 PCB KEY SWITCHES MICON 5 - TACTILE SWITCHES MICON 5 Circuit diagram acc. to IEC 617 4 1 3 1 4 3 4 3 4 2 3 2 MICON 5 Force-travel diagram 4 4 Schaltzeichen nach IEC 617 The two outer contacts must be connected. Operating force F1 and switching travel S2 see order block. MICON 5 Product code acc. to DIN EN ISO 9001 (EN ISO 8402) Solder pad 2.54 Wochentag / weekday 4.20 Schicht / work shift MICON 5 Typ / type Produktionsanlage / machine 7.40 Kalenderwoche / calendar week Jahr / year D=2013, E= 2014... 0.55 Auere Kontakte mussen gebruckt werden/ Outward contacts must be connected 4 A 7-digit code is printed on the housing of the key switch. This code informs about production date, type and production shift. MICON 5 SMT version, tape and reel MICON 4-6 PCB KEY SWITCHES MICON 5 - TACTILE SWITCHES PCB pattern, smallest grid (without plungers) 7.80 MICON 5 THT MICON 5 SMT 6.00 6.00 7.80 4 MICON 4-7 PCB KEY SWITCHES MICON 5 - TACTILE SWITCHES MICON 5 Tactile switch, SMT Standard Technical data see page 4 - 5 SMT Standard 2.54 3.85 0.10 7.40 6.40 0.10 5.10 0.10 4.20 0.35 2.45 0.55 Auere Kontakte mussen gebruckt werden/ Outward contacts must be connected 0.05 0.05 Produkt type Terminals Solder heat resistance / Solderability Operating force F1 (20%) Switching travel S2 (0.15 mm) Operating life (test force) Order no. X SMT DIN EN 60068-2-58 3.0 N 0.7 mm 1,000,000 (4 N) 1.14.002.101/0000 Z SMT DIN EN 60068-2-58 3.6 N 0.8 mm 250,000 (6 N) 1.14.002.001/0000 W SMT DIN EN 60068-2-58 5.5 N 0.9 mm 1,000,000 (8 N) 1.14.002.111/0000 Y SMT DIN EN 60068-2-58 8.0 N 1.1 mm 250,000 (12 N) 1.14.002.011/0000 J SMT DIN EN 60068-2-58 1.5 N 0.5 mm 1,000,000 (4 N) 1.14.002.201/0000 Packing: in tape, reel with 2100 pieces Keycaps see RK 90 Mounting hints: Special pipette (Siemens Siplace order no.: 348514-02), mounting with collect and place head Recommendation for screen printing: 150 m stencil with 10% reduction of the pad size. MICON 5 Tactile switch, SMT low MICON Technical data see page 4 - 5 SMT nieder 2.54 3.45 0.10 0.35 6.40 0.10 5.10 0.10 4-8 4.20 2.45 7.40 4 The key switch 1.14.002.201/0000 does not provide tactile and audible feedback. It is therefore generally used only as a redundant auxiliary switch to other MICON standard switches, if this is required for safety reasons. 0.55 Auere Kontakte mussen gebruckt werden/ Outward contacts must be connected 0.05 0.05 Produkt type Terminals Solder heat resistance / Solderability Operating force F1 (20%) Switching travel S2 (0.15 mm) Operating life (test force) Order no. S SMT DIN EN 60068-2-58 3.0 N 0.6 mm 1,000,000 (4 N) 1.14.002.103/0000 T SMT DIN EN 60068-2-58 3.6 N 0.7 mm 250,000 (6 N) 1.14.002.003/0000 PCB KEY SWITCHES MICON 5 - TACTILE SWITCHES - Table (continued) - MICON 5 - Tactile switch, SMT low Produkt type Terminals Solder heat resistance / Solderability Operating force F1 (20%) Switching travel S2 (0.15 mm) Operating life (test force) Order no. L SMT DIN EN 60068-2-58 5.5 N 0.7 mm 1,000,000 (8 N) 1.14.002.113/0000 Packing: in tape, reel with 2100 pieces Keycaps see RK 90 Mounting hints: Special pipette (Siemens Siplace order no.: 348514-02), mounting with collect and place head Recommendation for screen printing: 150 m stencil with 10% reduction of the pad size. MICON 5 Tactile switch, THT Standard Technical data see page 4 - 5 6.35 Pad- 1.50 3.51 2.54 6.40 0.10 3.80 0.10 2.40 THT-Anschluss 5.10 0.10 6.40 0.20 2.54 0.20 Hole 0.70 Produkt type Terminals Solder heat resistance / Solderability Operating force F1 (20%) Switching travel S2 (0.15 mm) Operating life (test force) Order no. O THT DIN EN 60068-2-20 3.0 N 0.7 mm 1,000,000 (4 N) 1.14.002.106/0000 Q THT DIN EN 60068-2-20 3.6 N 0.8 mm 250,000 (6 N) 1.14.002.006/0000 N THT DIN EN 60068-2-20 5.5 N 0.9 mm 1,000,000 (8 N) 1.14.002.116/0000 P THT DIN EN 60068-2-20 8.0 N 1.1 mm 250,000 (12 N) 1.14.002.016/0000 4 MICON Packing: in tubes with 102 pieces Keycaps see RK 90 4-9 PCB KEY SWITCHES MICON 5 - PLUNGER ROUND, NOT ILLUMINABLE MICON 5 Plungers round, not illuminable Typischer Systemaufbau Runder Stossel typical system structure round tappet 3.85 D GH L 1.30 FP Empfehlung Distanzbuchse / distance sleeve Hochpragung: 0.35 mm Kleberdicke: 0.15 mm FD recommendation ST embossment: 0.35 mm adhesive thickness: 0.15 mm min. 3.00 RM Description A - Height of key switch: SMT type: 3.85 mm, THT type: 3.80 mm D - Length of spacer D = GH - KP - FP FD - Front panel cut-out FD = ST + 1 mm FP - Front panel thickness GH - Overall height: GH = A + L1 + 0.05 (SMT type), GH = A + L 1 (THT type) L - Overall length of plunger RM - Key grid ST - Diameter of plunger The plungers can only be combined with MICON 5 version Standard (red bubble). Technical Data 4 MICON 4-10 General information Plunger diameter/size ST Length of plunger L Overall height GH with embossing 9.2 mm compatible see order block see order block see order block see order block Other specifications ROHS compliant REACH compliant yes yes PCB KEY SWITCHES MICON 5 - PLUNGER ROUND, NOT ILLUMINABLE Typical system design under overlay, round plungers, opaque, non-illuminable 3.85 D GH L 1.30 FP Empfehlung Distanzbuchse / distance sleeve Hochpragung: 0.35 mm Kleberdicke: 0.15 mm FD recommendation ST embossment: 0.35 mm adhesive thickness: 0.15 mm min. 3.00 RM RAFI standard system design, 9.70 mm height, round plunger, opaque, non-illuminable 15.50 14.50 3.85 9.25 7.25 9.70 2.00 0.35 min. 3.00 1.30 Empfehlung Hochpragung: 0.35 mm Kleberdicke: 0.15 mm recommendation embossment: 0.35 mm adhesive thickness: 0.15 mm 4 18.50 MICON Lowest system design, 5.55 mm height, round plunger, opaque, non-illuminable 15.50 3.00 14.50 2.00 0.50 1.30 3.85 3.00 5.55 min. 3.00 18.50 4-11 PCB KEY SWITCHES MICON 5 - PLUNGER ROUND, NOT ILLUMINABLE MICON 5 Plunger opaque, round, not illuminable Technical data see page 4 - 10 4 MICON 4-12 Plunger diameter/size ST Length of plunger L Overall height GH with embossing 9.2 mm compatible 6.0 mm 3.00 mm 5.55 mm - 5.46.001.103/0200 6.0 mm 3.45 mm 6.0 mm - 5.46.001.104/0200 6.0 mm 3.95 mm 6.5 mm - 5.46.001.105/0200 6.0 mm 4.45 mm 7.0 mm - 5.46.001.106/0200 6.0 mm 7.15 mm 9,7 mm 6.0 mm 9.95 mm 12,5 mm - 5.46.001.108/0200 8.0 mm 3.00 mm 5.55 mm - 5.46.001.123/0200 8.0 mm 3.45 mm 6.0 mm - 5.46.001.124/0200 8.0 mm 3.95 mm 6.5 mm - 5.46.001.125/0200 8.0 mm 4.45 mm 7.0 mm - 5.46.001.126/0200 8.0 mm 5.50 mm 8.5 mm - 5.46.001.121/0200 8.0 mm 7.15 mm 9,7 mm 8.0 mm 9.95 mm 12,5 mm - 5.46.001.128/0200 8.0 mm 10.30 mm 12.85 mm - 5.46.001.122/0200 11.5 mm 3.00 mm 5.55 mm - 5.46.001.143/0200 11.5 mm 3.45 mm 6.0 mm - 5.46.001.144/0200 11.5 mm 3.95 mm 6.5 mm - 5.46.001.145/0200 11.5 mm 4.45 mm 7.0 mm - 5.46.001.146/0200 11.5 mm 5.50 mm 8.5 mm - 5.46.001.141/0200 11.5 mm 7.15 mm 9,7 mm 11.5 mm 9.95 mm 12,5 mm - 5.46.001.148/0200 11.5 mm 10.30 mm 12.85 mm - 5.46.001.142/0200 14.5 mm 3.00 mm 5.55 mm - 5.46.001.163/0200 14.5 mm 3.45 mm 6.0 mm - 5.46.001.164/0200 14.5 mm 3.95 mm 6.5 mm - 5.46.001.165/0200 14.5 mm 4.45 mm 7.0 mm - 5.46.001.166/0200 14.5 mm 7.15 mm 9,7 mm 14.5 mm 9.95 mm 12,5 mm - 5.46.001.168/0200 19.0 mm 3.00 mm 5.55 mm - 5.46.001.183/0200 yes Order no. 5.46.001.107/0200 yes 5.46.001.127/0200 yes 5.46.001.147/0200 yes 5.46.001.167/0200 PCB KEY SWITCHES MICON 5 - PLUNGER ROUND, NOT ILLUMINABLE - Table (continued) - MICON 5 - Plunger opaque, round, not illuminable Plunger diameter/size ST Length of plunger L Overall height GH with embossing 9.2 mm compatible 19.0 mm 3.45 mm 6.0 mm - 5.46.001.184/0200 19.0 mm 3.95 mm 6.5 mm - 5.46.001.185/0200 19.0 mm 4.45 mm 7.0 mm - 5.46.001.186/0200 19.0 mm 7.15 mm 9,7 mm 19.0 mm 9.95 mm 12,5 mm yes Order no. 5.46.001.187/0200 - 5.46.001.188/0200 Can only be combined with MICON 5 version Standard (red bubble) 4 MICON 4-13 PCB KEY SWITCHES MICON 5 - PLUNGER ROUND, RING ILLUMINATION MICON 5 Plungers round, ring illumination * W * NE 4 MICON 4-14 A MICON system design with ring illumination is only possible with the type height 9.70 mm. We recommend back printing the ring illumination area with a diffusing ink. For the actuating area, back printing with an opaque ink is recommended. PCB KEY SWITCHES MICON 5 - PLUNGER ROUND, RING ILLUMINATION Typical system design with 9.70 mm height, round plunger, opaque, ring illumination recommendation embossment: 0.35 mm adhesive thickness: 0.15 mm 30.00 26.20 29.20 24.70 21.70 Ringausleuchtung / ring illumination Dekorfolie / decor foil (mit Hochpragung im Bereich des Stossels / with high embrossing in the area of the plunger) Frontplatte front panel 7.25 9.25 8.80 9.70 Gesamthohe Taster mit Stoel / total high buttons with plunger Empfehlung Hochpragung: 0.35 mm Kleberdicke: 0.15 mm Distanz / distance Leiterplatte / PCB Stossel / plunger Ringausleuchtung / ring illumination Variante: 5.05.511.639/0000 MICON5 Ringausleuchtung / ring illumination Variante: 5.05.511.640/0000 Ringausleuchtung / ring illumination Variante: 5.05.511.641/0000 LED Hole pattern of PCB 1.50 Positionierungsbohrung / positioning hole 23.50 18.00 4 15.50 MICON LED Variante / variant: 5.05.511.639/0000 Variante / variant: 5.05.511.641/0000 Variante / variant: 5.05.511.640/0000 4-15 PCB KEY SWITCHES MICON 5 - PLUNGER ROUND, RING ILLUMINATION MICON 5 Plunger round, ring illumination Plunger diameter non-illuminated Diameter ring illumination RA 9.2 mm compatible Overall height GH with embossing Order no. 11.50 mm 20.70 yes 9.70 mm 5.05.511.641/0000 14.50 mm 23.70 yes 9.70 mm 5.05.511.640/0000 19.00 mm 28.20 yes 9.70 mm 5.05.511.639/0000 Plunger round, not illuminable is included in delivery. 4 MICON 4-16 PCB KEY SWITCHES MICON 5 - PLUNGER SQUARE, ILLUMINABLE MICON 5 Plungers square, illuminable 6.00 9.60 18.50 Stoel / plunger 14,5 mm Pic. with 4 LED OSRAM LO M676-Q1R1-24 Description A - Height of key switch: SMT = 3.85 mm, THT = 3.80 mm B - Width of plunger (11 x 11 mm, 14,5 x 14,5 mm or 18 x 18 mm) D - GH - FP - 0.5 mm (= embossing height 0.35 mm + glue height 0.15 mm) FD - Front panel cut-out: B + 1 mm FP - Thickness of front plate GH - Overall height: A + 5.75 mm KS - Glue strip min. 3 mm R - Grid size: FD + KS The plungers can only be combined with MICON 5 version Standard (red bubble). Technical Data General information Overall height GH Color of lens see order block see order block Other specifications ROHS compliant REACH compliant yes yes 4 MICON 4-17 PCB KEY SWITCHES MICON 5 - PLUNGER SQUARE, ILLUMINABLE Typical system design under overlay, square plungers, illuminable Aufbau: Hochpragung 0.35 mm Kleberdicke 0.15 mm D - Distanzlange / distance length D = GH - FP - 0.5 (Pragehohe / embossing height + Klebedicke / adhesive thickness) min. 3.00 STQ FP Distanzbuchse / distance sleeve FDQ assembly: embossment: 0.35 mm adhesive thickness: 0.15 mm 2.50 0.35 Vorspannung / preload D L STQ - Breite quadratischer Stoel / width square tappet 3.85 GH L - Stoellange / tappet length FDQ - Quadratischer Frontplattendurchbruch / square front panel breakthrough FDQ = STQ + 1mm RM FP - Frontplattenstarke / Panel thickness RM - Rasterma / grid dimensions RM = FDQ + min. 3 mm RAFI standard system design, 9.70 mm height, square plunger, illuminable Aufbau: Hochpragung 0.35 mm Kleberdicke 0.15 mm assembly: embossment: 0.35 mm adhesive thickness: 0.15 mm Distanzbuchse / distance sleeve 14.50 6.20 2.00 3.00 4 3.85 2.50 7.25 9.70 0.35 Vorspannung preload 15.00 18.50 Possible arrangement of LEDs with square plunger, illuminable View without frontpanel, ouverlay and lens 7.20 9.60 6.00 MICON Stoel / plunger 11 mm 18.50 Stoel / plunger 14.50 6.00 9.00 Stoel / plunger 4-18 14,5 mm 14,5 mm PCB KEY SWITCHES MICON 5 - PLUNGER SQUARE, ILLUMINABLE MICON 5 Plunger square, illuminable, 11 x 11 mm Technical data see page 4 - 17 Platzierungsmoglichkeiten der LEDs (Ansicht ohne Frontplatte, Folie und Blende) placement options of the LEDs (view without front panel, foil and lens) 7.20 Stoel / plunger 11 mm Pic. with 2 LED OSRAM LO M676-Q1R1-24 Overall height GH Color of lens Order no. 9.70 mm red 5.05.511.470/2300 12.50 mm red 5.05.511.471/2300 9.70 mm yellow 5.05.511.470/2400 12.50 mm yellow 5.05.511.471/2400 9.70 mm green 5.05.511.470/2500 12.50 mm green 5.05.511.471/2500 9.70 mm blue 5.05.511.470/2600 12.50 mm blue 5.05.511.471/2600 9.70 mm white 5.05.511.470/2200 12.50 mm white 5.05.511.471/2200 4 Can only be combined with MICON 5 version Standard (red bubble) MICON 5 Plunger square, illuminable, 14.5 x 14.5 mm MICON Technical data see page 4 - 17 6.00 9.60 18.50 Stoel / plunger 14,5 mm Pic. with 4 LED OSRAM LO M676-Q1R1-24 4-19 PCB KEY SWITCHES MICON 5 - PLUNGER SQUARE, ILLUMINABLE - Table (continued) - MICON 5 - Plunger square, illuminable, 14.5 x 14.5 mm Overall height GH Color of lens Order no. 9.70 mm red 5.05.511.475/2300 12.50 mm red 5.05.511.476/2300 9.70 mm yellow 5.05.511.475/2400 12.50 mm yellow 5.05.511.476/2400 9.70 mm green 5.05.511.475/2500 12.50 mm green 5.05.511.476/2500 9.70 mm blue 5.05.511.475/2600 12.50 mm blue 5.05.511.476/2600 9.70 mm white 5.05.511.475/2200 12.50 mm white 5.05.511.476/2200 Can only be combined with MICON 5 version Standard (red bubble) MICON 5 Plunger square, illuminable, 18 x 18 mm Technical data see page 4 - 17 Platzierungsmoglichkeiten der LEDs (Ansicht ohne Frontplatte, Folie und Blende) placement options of the LEDs (view without front panel, foil and lens) 4 14.50 6.00 9.00 Stoel / plunger 14,5 mm MICON 4-20 Overall height GH Color of lens Order no. 9.70 mm red 5.05.511.480/2300 12.50 mm red 5.05.511.481/2300 9.70 mm yellow 5.05.511.480/2400 12.50 mm yellow 5.05.511.481/2400 9.70 mm green 5.05.511.480/2500 12.50 mm green 5.05.511.481/2500 9.70 mm blue 5.05.511.480/2600 12.50 mm blue 5.05.511.481/2600 9.70 mm white 5.05.511.480/2200 12.50 mm white 5.05.511.481/2200 PCB KEY SWITCHES MICON 5 - PLUNGER SQUARE, ILLUMINABLE - Table (continued) - MICON 5 - Plunger square, illuminable, 18 x 18 mm Can only be combined with MICON 5 version Standard (red bubble) 4 MICON 4-21 PCB KEY SWITCHES MICON 5 - SQUARE PLUNGERS, SPOT-ILLUMINATION MICON 5 Plungers square, spot-illumination * NEW Technical Data 4 MICON 4-22 General information Overall height GH with embossing Color of lens Dimensions 9.70 mm white see order block Other specifications ROHS compliant REACH compliant yes yes PCB KEY SWITCHES MICON 5 - SQUARE PLUNGERS, SPOT-ILLUMINATION RAFI standard system design, 9.70 mm height, square plunger, spot-illumination Aufbau: Hochpragung 0.35 mm Kleberdicke 0.15 mm assembly: embossment: 0.35 mm adhesive thickness: 0.15 mm Distanzbuchse / distance sleeve 14.50 6.20 2.00 3.00 3.85 2.50 7.25 9.70 0.35 Vorspannung preload 15.00 18.50 Possible arrangement of LEDs with square plunger, spot illumination, 14,5 x 14,5 mm 18.50 4.90 4.90 8.00 9.80 4.90 9.80 9.00 4 9.00 Possible arrangement of LEDs with square plunger, spot illumination, 18 x 18 mm MICON 22.00 13.30 10.00 13.30 6.65 10.00 6.65 12.00 12.00 12.00 4-23 PCB KEY SWITCHES MICON 5 - SQUARE PLUNGERS, SPOT-ILLUMINATION MICON 5 Plunger square, spot-illumination, plunger 14.5 x 14.5 mm Technical data see page 4 - 22 Overall height GH with embossing Spot-illumination Color of lens Dimensions Order no. 9.70 mm white 14.5 x 14.5 5.05.511.649/2200 9.70 mm white 14.5 x 14.5 5.05.511.650/2200 9.70 mm white 14.5 x 14.5 5.05.511.651/2200 MICON 5 Plunger square, spot-illumination, plunger 18 x 18 mm 4 Technical data see page 4 - 22 MICON 4-24 Overall height GH with embossing Spot-illumination Color of lens Dimensions Order no. 9.70 mm white 18 x 18 5.05.511.658/2200 9.70 mm white 18 x 18 5.05.511.659/2200 9.70 mm white 18 x 18 5.05.511.660/2200 PCB KEY SWITCHES MICON 5 - SQUARE PLUNGERS, SPOT-ILLUMINATION GET IN TOUCH 4 The uniqueness of the moment MICON Whenever a pushbutton or switch made by RAFI is used, the company`s technology ensures that proper contact is made. For over 100 years now, we have driven innovation in human-machine communication and set standards across the globe. From operating elements and highly intelligent data entry systems to complete custom solutions from one source - all of our products are developed to meet the requirements of our long-standing customers. The results are excellent: close business relationships, innovative products and motivated employees. Visit our website to learn more about RAFI. www.rafi.de 4-25 PCB KEY SWITCHES MICON 5 - PLUNGER FOR SIGNAL INDICATOR MICON 5 Plungers for signal indicator Technical Data 4 MICON 4-26 General information Overall height GH with embossing Lens color Dimensions 9.70 mm white see order block Other specifications ROHS compliant REACH compliant yes yes PCB KEY SWITCHES MICON 5 - PLUNGER FOR SIGNAL INDICATOR RAFI standard system design, 9.70 mm height, signal indicator 15.50 min. 3.00 7.25 9.25 2.00 14.50 18.50 Possible arrangement of LEDs with signal indicator LED Platzierung mit Leuchtfeld 14.5x14.5 LED placement with light field 14.5 x14.5 14.50 18.50 6.00 4 MICON 4-27 PCB KEY SWITCHES MICON 5 - PLUNGER FOR SIGNAL INDICATOR MICON 5 Plunger for signal indicator, 1-module Technical data see page 4 - 26 LED Platzierung mit Leuchtfeld 14.5x14.5 LED placement with light field 14.5 x14.5 15.00 18.50 18.00 14.50 22.00 6.00 11.00 LED Platzierung mit Leuchtfeld 18x18 LED placement with light field 18x18 10.00 8.00 LED Platzierung mit Leuchtfeld 11x11 LED placement with light field 11x11 Overall height GH with embossing Lens color Dimensions Order no. 9.70 mm white 11 x 11 mm 5.05.005.182/2200 9.70 mm white 14.5 x 14.5 mm 5.05.005.175/2200 9.70 mm white 18 x 18 mm 5.05.005.176/2200 MICON 5 Plunger for signal indicator, 2-module Technical data see page 4 - 26 4 LED Platzierung mit Leuchtfeld 14.5x29 LED placement with light field 14.5 x29 LED Platzierung mit Leuchtfeld 18x36 LED placement with light field 18x36 33.00 40.00 10.00 10.00 5.00 4-28 16.00 36.00 29.20 12.00 29.00 18.00 MICON 6.00 14.50 5.00 Overall height GH with embossing Lens color Dimensions Order no. 9.70 mm white 14.5 x 29 mm 5.05.005.177/2200 9.70 mm white 18 x 36 mm 5.05.005.178/2200 PCB KEY SWITCHES MICON 5 - PLUNGER FOR SIGNAL INDICATOR Redundant system design with illuminable plungers MICON 1.14.002.201, 1.5 N The tactile switch type 1.14.002.201/0000 is designed only for use in a redundant system with another SMT switch of standard height. For a redundant system design, the plunger sizes 14.5 x 14.5 mm or 18 x 18 mm must be used. View without front panel, overlay and lens 12.00 4 6.00 6.00 9.60 18.50 Stoel / plunger Plunger 14,5 x 14,5 mm MICON 22.00 14,5mm Plunger 18 x 18 mm 4-29 PCB KEY SWITCHES MICON 5 - PLUNGER FOR SIGNAL INDICATOR Gehause / housing Dichtung / seal 0.50 TB Gehause / housing 3.85 D H BS min. 2.50 D RM min. 1.50 Frontplatte / front panel FP Tastenkappe /key cap 1.20 Aluminiumtastenkappen / aluminum keycap 2.45 Kunststoffkappen / plastic cap Typical system design degree of protection IP 65 Distanzbuchse / distance sleeve Befestigungsschiene / mounting rail Distanzbuchse / distance sleeve MICON 5 Dichtungsfolie / sealing foil Leiterplatte / PCB Dargestellte variante / variant shown 1.14.002.001 1.20 Aluminiumtastenkappen / aluminum keycap 2.45 Kunststoffkappen / plastic cap 4 Typical system design degree of protection IP 40 MICON min. 2.50 Gehause / housing min 1.50 BS Gehause / housing 3.85 D D FP RM Frontplatte / front panel Befestigungsschiene / mounting rail Distanzbuchse / distance sleeve MICON5 4-30 Leiterplatte / PCB Distanzbuchse / distance sleeve PCB KEY SWITCHES RACON - TACTILE SWITCHES RACON Tactile switches RACON tactile switches distinct key click, excellent switching reliability. For use under an overlay or with RK 90 keycaps. Print and SMD versions available (suitable for automatic assembly). All products are RoHS compliant. 4 RACON 4-31 PCB KEY SWITCHES RACON - TACTILE SWITCHES Content RACON 8 - Tactile switches RACON 8 - Tactile switch, THT outward RACON 8 - Tactile switch, THT inward RACON 8 - Tactile switch, SMT gullwing (Z) terminals 4 4 4 4 - 33 37 37 38 RACON 12 - Tactile switches RACON 12 - Tactile switch solder terminals for PCB, outward RACON 12 - Tactile switch solder terminals for PCB, inward RACON 12 - Tactile switch SMT gullwing (Z) terminals 4 4 4 4 - 39 43 43 44 RACON 12 V - Tactile switches with vertical adapter RACON 12 V - Tactile switch with vertical adapter 4 - 45 4 - 46 RACON 12 i - Tactile switches RACON 12 i - Tactile switch 4 - 47 4 - 48 RACON - Special accessories Plunger round Square plunger for membrane data entry system 4 - 49 4 - 49 4 - 51 RK 90 II - Key cap system for RACON 12 with individual sealing RK 90 II - Sealing frame 4 - 52 4 - 53 4 RACON 4-32 PCB KEY SWITCHES RACON 8 - TACTILE SWITCHES RACON 8 Tactile switches RACON 8 tactile switches offer an extremely high switching reliability while needing very little space. They can be arranged as single keys, in rows or key blocks. When arranged under an overlay, RACON key switches should be combined with plungers. The features at a glance: s Suitable for the most common soldering methods - Wave soldering bath for THT versions - Reflow soldering for SMT version - Vapour phase soldering for SMT versions - Manual soldering s SMT version suitable for processing with an automatic SMT assembly machine s IMDS listed You can download actual product information from our internet site www. rafi.de / Catalogues and Downloads Technical Data Dimensions Length of housing Width of housing Height of housing 8.4 mm 8.4 mm see order block Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination soldering see order block snap-action contact 1 NO Au no Mechanical characteristics Operating force Switching travel 0.6 N 3.3 0.340.1 mm Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance 0.02 V 35 V 0.01 mA 100 mA 1W 100 mE 109 E Other specifications Ambient temp. operating min. Ambient temp. operating max. Resistance to environment Operating life Solderability / Solder heat resistance Flammability of materials Packing Produkt type ROHS compliant REACH compliant -40 C +90 C DIN EN 60068-2 -14,-30,-33 and -78 1,000,000 see order block UL 94 HB see order block see order block yes yes Produktionstag/ production day (21.) Typencode type code (F1) Produktionsschicht/ production shift (1) Produktionsjahr/ production year (2013) Produktionsmonat/ production month (03) 4 RACON 4-33 PCB KEY SWITCHES RACON 8 - TACTILE SWITCHES Accessories RACON 8 - Tactile switch Description Photo Order no. Spacer, round, length 6.25 mm, red 5.30.759.034/0000 2 - 265, 4 - 97, 5 - 32 Plunger round 5.46.167.311/0209 4 - 49 RK 90 - Keycap body, for lenses 9 x 9 mm 5.55.103.265/1013 4 - 110 For other plungers, refer to the chapter RACON special accessories"; for keycaps, refer to the chapter RK 90". 4 RACON 4-34 Additional accessories see page PCB KEY SWITCHES RACON 8 - TACTILE SWITCHES RACON 8, Typical system assembly with plunger under overlay FD KS Empfohlene Hochpragung 0.35mm/ recommended embossing 0.35mm Distanzbuchse/ distance sleeve ST 0.10 RM D GH D A L GH D FD KS L ST A L A GH ST KP KS FP FD SMT gullwing terminal Distanzbuchse/ distance sleeve Empfohlene Hochpragung 0.35mm/ recommended embossing 0.35mm KP FP THT terminal inward Distanzbuchse/ distance sleeve Empfohlene Hochpragung 0.35mm/ recommended embossing 0.35mm KP FP THT terminal outward RM RM Variable Declaration THT terminal inward and outward A Height of key switch A = 4.90 D Length of spacer D = GH - KP - FP FD Front panel cut-out FD = ST + 1 mm FP Front panel thickness GH Overall height KP Thickness of overlay + embossing KS Glue webs for overlay, min. 3 mm L Length of plunger RM Key grid ST Diameter of plunger SMT terminal +/- 0.1 mm GH = A + L GH = A + L + 0.1 mm L = GH - A L = GH - A - 0.1 mm RACON 8, Standard system assembly 4.80 3.00 4.90 7.25 9.60 9.25 4 0.35 2.00 15.50 14.50 18.50 RACON RACON 8, Lowest system assembly 4.50 4.90 7.00 3.00 0.35 2.00 6.50 2.10 15.50 14.50 18.50 4-35 PCB KEY SWITCHES RACON 8 - TACTILE SWITCHES RACON 8, PCB hole pattern, smallest grid THT terminal outward THT terminal inward SMT gullwing terminal view on component side view on component side view on component side RACON 8, SMT terminal, tape and reel 4 Circuit diagram RACON 8 Switching symbols acc. to IEC 60 617 form X (twice interrupting) Typical force travel diagram RACON Operating force F1 and switching travel S2 see order block 4-36 PCB KEY SWITCHES RACON 8 - TACTILE SWITCHES RACON 8 Tactile switch, THT outward Technical data see page 4 - 33 PCB footprint, view on component side Produkt type Terminals Operating force Solderability / Solder heat resistance Packing Order no. A1 THT outward 3.30.6 N DIN EN 60068-2-20 tubes a 60 pieces 1.14.100.501/0000 For keycaps refer to chapter RK 90", plungers see RACON special accessories". RACON 8 Tactile switch, THT inward Technical data see page 4 - 33 4 PCB footprint, view on component side Produkt type Terminals Operating force Solderability / Solder heat resistance Packing Order no. B1 THT inward 3.30.6 N DIN EN 60068-2-20 tubes a 60 pieces 1.14.100.502/0000 RACON For keycaps refer to chapter RK 90", plungers see RACON special accessories". 4-37 PCB KEY SWITCHES RACON 8 - TACTILE SWITCHES RACON 8 Tactile switch, SMT gullwing (Z) terminals Technical data see page 4 - 33 PCB footprint, view on component side Produkt type Terminals Operating force C1 SMT Gullwing (Z) Anschluss 3.3 0.6 N DIN EN 60068-2-58 C2 SMT Gullwing (Z) Anschluss 4.8 0.8 N DIN EN 60068-2-58 C4 SMT Gullwing (Z) Anschluss 6.3 1.0 N DIN EN 60068-2-58 Solderability / Solder heat resistance For keycaps refer to chapter RK 90", plungers see RACON special accessories". 4 RACON 4-38 Packing tape and reel a 1000 pieces tape and reel a 1000 pieces tape and reel a 1000 pieces Order no. 1.14.100.503/0000 1.14.100.603/0000 1.14.100.803/0000 PCB KEY SWITCHES RACON 12 - TACTILE SWITCHES RACON 12 Tactile switches RACON 12 tactile switches offer an extremely high switching reliability while needing very little space. They can be arranged as single keys, in rows or key blocks. When arranged under an overlay, RACON key switches should be combined with plungers. The features at a glance: s Suitable for the most common soldering methods - Wave soldering bath for THT versions - Reflow soldering for SMTversions - Vapour phase soldering for SMT versions - Manual soldering s SMT version suitable for processing with an automatic SMT assembly machine s IMDS listed Produktionsschicht/ production shift (1) Technical Data Produktionstag/ production day (21.) Typencode type code (F1) Produktionsjahr/ production year (2013) Dimensions Length of housing Width of housing Overall height 12 mm 12 mm see order block Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination soldering see order block snap-action contact 1 NO Au no Mechanical characteristics Operating force Switching travel see order block see order block Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance 0.02 V 35 V 0.01 mA 100 mA 1W 100 mE 109 E Other specifications Ambient temp. operating min. Ambient temp. operating max. Resistance to environment Operating life Solderability / Solder heat resistance Flammability of materials Packing Produkt code ROHS compliant REACH compliant -40 C +90 C DIN EN 60068-2 -14,-30,-33 and -78 see order block see order block UL 94 HB see order block see order block yes yes Produktionsmonat/ production month (03) 4 RACON 4-39 PCB KEY SWITCHES RACON 12 - TACTILE SWITCHES Accessories RACON 12 - Tactile switch Description Photo Order no. Spacer, round, length 6.25 mm, red 5.30.759.034/0000 2 - 265, 4 - 97, 5 - 32 Square plunger for membrane data entry system 5.46.001.057/0209 4 - 51 Plunger round 5.46.168.050/0209 4 - 50 RK 90 - Keycap body, for lens 1 -module 5.55.103.030/1013 4 - 112 For other plungers, refer to the chapter RACON special accessories"; for keycaps, refer to the chapter RK 90". 4 RACON 4-40 Additional accessories see page PCB KEY SWITCHES RACON 12 - TACTILE SWITCHES RACON 8, Typical system assembly with plunger under overlay THT terminal inward SMT gullwing terminal ST D GH A Distanzbuchse FD min. 3.00 KP FP ST Distanzbuchse GZ GH A L FD L FP Distanzbuchse Empfohlen: Hochpragung: 0.35 mm Kleberdicke: 0.15 mm PI D Empfohlen: Hochpragung: 0.35 mm Kleberdicke: 0.15 mm min. 3.00 D GH A L Printanschluss auenliegend Empfohlen: PA Hochpragung: 0.35 mm Kleberdicke: 0.15 mm FD min. 3.00 ST KP FP THT terminal outward RM RM RM Variable Declaration THT terminal inward and outward A Height of key switch A = 4.90 D Length of spacer D = GH - KP - FP FD Front panel cut-out FD = ST + 1 mm FP Front panel thickness GH Overall height KP Thickness of overlay + embossing L Length of plunger RM Key grid ST Diameter of plunger SMT terminal +/- 0.1 mm GH = A + L GH = A + L + 0.1 mm L = GH - A L = GH - A - 0.1 mm RACON 12, Standard system assembly 4 0.50 7.25 9.66 4.96 18.50 14.50 2.00 4.70 2.00 3.00 7.25 9.76 0.50 4.80 3.00 14.50 4.96 4.96 7.25 9.76 14.50 15.50 15.50 2.00 4.80 3.00 0.50 THT innen 15.50 18.50 18.50 RACON 15.50 4.50 0.50 2.00 4.50 3.00 14.50 18.50 4.96 6.96 7.05 4.95 7.06 4.96 18.50 2.00 15.50 3.00 14.50 0.50 2.00 3.00 14.50 2.10 15.50 0.50 2.00 4.50 2.10 RACON 12, Lowest system assembly 18.50 4-41 PCB KEY SWITCHES RACON 12 - TACTILE SWITCHES RACON 12, PCB hole pattern, smallest grid SMT gullwing terminal GZ 5.00 PI RMmin =12.50 PA RMmin =12.50 THT terminal inward RMmin =12.50 THT terminal outward RMmin =15.24 view on component side RACON 12, SMT terminal, tape and reel RMmin =12.50 view on component side RMmin =16.50 view on component side Circuit diagram RACON 12 4 Switching symbols acc. to IEC 60 617 form X (twice interrupting) RACON Typical force travel diagram Operating force F1 and switching travel S2 see order block 4-42 PCB KEY SWITCHES RACON 12 - TACTILE SWITCHES RACON 12 Tactile switch solder terminals for PCB, outward Technical data see page 4 - 39 PCB footprint, view on component side Produkt code Operating force Switching travel Operating life Solderability / Packing Solder heat resistance A1 3.60.7 N 0.610.1 mm 1,000,000 DIN EN 60068-2-20 Order no. tubes a 45 pieces 1.14.001.501/0000 For keycaps refer to chapter RK 90", plungers see RACON special accessories". RACON 12 Tactile switch solder terminals for PCB, inward Technical data see page 4 - 39 4 PCB footprint, view on component side RACON Produkt code Operating force Switching travel Operating life Solderability / Packing Solder heat resistance B1 3.60.7 N 0.610.1 mm 1,000,000 DIN EN 60068-2-20 Order no. tubes a 45 pieces 1.14.001.502/0000 For keycaps refer to chapter RK 90", plungers see RACON special accessories". 4-43 PCB KEY SWITCHES RACON 12 - TACTILE SWITCHES RACON 12 Tactile switch SMT gullwing (Z) terminals Technical data see page 4 - 39 PCB footprint, view on component side Produkt code Operating force Switching travel Operating life Solderability / Solder Packing heat resistance 0.6 N 0.55 mm 1,000,000 DIN EN 60068-2-58 0.7 N 0.610.1 mm 1,000,000 DIN EN 60068-2-58 0.8 N 0.66 mm 1,000,000 DIN EN 60068-2-58 1.6 N 0.70.1 mm 1,000,000 DIN EN 60068-2-58 2.5 N 0.730.1 mm 65.000 DIN EN 60068-2-58 C2 2.5 C1 3.6 C4 4.7 ZD 6.8 ZE 9.7 For keycaps refer to chapter RK 90", plungers see RACON special accessories". 4 RACON 4-44 tape and reel a 750 pieces tape and reel a 750 pieces tape and reel a 750 pieces tape and reel a 750 pieces tape and reel a 750 pieces Order no. 1.14.001.603/0000 1.14.001.503/0000 1.14.001.803/0000 1.14.001.916/0000 1.14.001.920/0000 PCB KEY SWITCHES RACON 12 V - TACTILE SWITCHES RACON 12 V Tactile switches with vertical adapter The RACON 12 V version can be used, for example, for PC plug-in boards and for measurement and control engineering applications. The vertical mounting adapter (support element) absorbs the operating force so that the pressure on the soldered terminals is reduced. For this mounting arrangement, the key switch is provided with two horizontal terminals on one side. Technical Data Dimensions Length Width Overall height 14.5 mm 13.6 mm 4.95 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination soldering THT snap-action contact 1 NO Au no Mechanical characteristics Operating force Switching travel 0.7 N 3.6 0.610.1 mm Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance 0.02 V 35 V 0.01 mA 100 mA 1W 100 mE 109 E Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. (product) Storage temperature max. (in tube) Environmental restistance Operating life Solderability / solder heat resistance Flammability of materials Packing Produkt code ROHS compliant REACH compliant -40 C +80 C -50 C +85 C +85 C acc. to IEC 60068-2-14, -30, -33 and -78 1,000,000 DIN EN 60068-2-20 UL 94 HB in boxes a 100 pieces F1 yes yes 4 RACON 4-45 PCB KEY SWITCHES RACON 12 V - TACTILE SWITCHES RACON 12 V Tactile switch with vertical adapter Technical data see page 4 - 45 Produkt code Terminals Contact arrangement Packing Order no. F1 THT 1 NO in boxes a 100 pieces 1.14.001.505/0000 Plungers for overall height of 6.5 mm may not be used. 4 RACON 4-46 PCB KEY SWITCHES RACON 12 I - TACTILE SWITCHES RACON 12 I Tactile switches Application note Low-profile keyboards with RACON 12 i components should be designed with a grid spacing of 15.24 mm. With this grid, frame webs remain free between the individual keys. The overlay can be glued onto these frame webs; we recommend area embossing over the keys for the overlays. If our RK 90 system design is used, we recommend the 9 x 9 mm keycaps. General information Color of lens Recommended key grid Key grid min. see order block 15.24 x 15.24 mm 12.5 x 12.5 mm Dimensions Length Width Overall height 11.35 mm 11.35 mm 9.7 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED color LED type soldering THT snap-action contact 1 NO Au fully illuminated 2 LED see order block standard 2 mm Mechanical characteristics Operating force Switching travel N 3.3 0.340.1 mm Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Dielectric strength AC min. Insulation resistance 0.02 V 35 V 0.01 mA 100 mA 1W 100 mE 750 V 109 E Electrical characteristics of LED LED rated current max. IF at 25 C LED current reduction beginning with 50 degree C LED wavelength typ. LED forward voltage UF at 20 mA LED breakdown voltage UR at 25 C red/green: 30, yellow: 50 mA red: 0.5 mA/degree C, yellow 0.8 mA/degree C red 639, green 510-535, yellow 590 red: 1.8 V/20 mA, yellow: 1.9 V/20 mA min. 5 V/0.1 mA Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. (product) Storage temperature max. (in tube) Environmental restistance Operating life Solderability / solder heat resistance Flammability of materials Packing ROHS compliant REACH compliant -40 C +80 C see order block see order block see order block acc. to IEC 60068-2-14, -30, -33 and -78 1,000,000 DIN EN 60068-2-20 UL 94 HB tubes a 45 pieces yes yes 1.75 0.30 9.70 0.20 Technical Data beleuchteter Bereich/ illuminated area 0.6 9.95 11.35 4 RACON 4-47 PCB KEY SWITCHES RACON 12 I - TACTILE SWITCHES RACON 12i Typical system assembly RACON 12i PCB smallest grid 12.50 8.90 1.00 4.50 12.50 9.2 0.1 12.00 15.24 7.60 view on component side 8.50 view on component side Recommended area embossing: 0.35 mm at glue spacer thickness of 0.15 mm RACON 12i Circuit diagram LED hole patterns 7.60 - 1.00 (8x) view on component side 4.50 8.90 + 8.50 + LED Switching symbols acc. to IEC 60 617 form X (twice interrupting) RACON 12 i Tactile switch 4 Technical data see page 4 - 47 RACON illuminated area Terminals Contact arrangement Illumination Color of lens LED color Order no. THT 1 NO fully illuminated 2 LED red red 1.14.001.551/0000 THT 1 NO fully illuminated 2 LED yellow yellow 1.14.001.553/0000 THT 1 NO fully illuminated 2 LED orange yellow 1.14.001.554/0000 THT 1 NO fully illuminated 2 LED green green 1.14.001.552/0000 If keycaps are used we recommend RK 90 keycaps 9 x 9 mm. 4-48 PCB KEY SWITCHES RACON 8/12 - SPECIAL ACCESSORIES RACON Special accessories GH = L" lenth oh plunger + A" height of key switch (+ 0.1 mm for SMT versions) Front panel cut-out = size of plunger + 1 mm Technical Data Dimensions Length of plunger L RACON version Plunger diameter/size see order block see order block see order block Other specifications ROHS compliant REACH compliant yes yes Plunger round A GH L Technical data see page 4 - 49 4 Plunger diameter/size RACON version Length of plunger L Order no. 8 mm RACON 8 1.4 mm 5.46.167.301/0209 8 mm RACON 8 1.5 mm 5.46.167.102/0209 8 mm RACON 8 1.6 mm 5.46.167.101/0209 8 mm RACON 8/12 1.9 mm 5.46.167.090/0209 8 mm RACON 8/12 2 mm 5.46.167.106/0209 8 mm RACON 8/12 2.1 mm 5.46.167.107/0209 8 mm RACON 8/12 4.6 mm 5.46.167.091/0209 8 mm RACON 8/12 4.7 mm 5.46.167.311/0209 8 mm RACON 8/12 4.8 mm 5.46.167.094/0209 8 mm RACON 8/12 7.4 mm 5.46.167.092/0209 8 mm RACON 8/12 7.5 mm 5.46.167.099/0209 8 mm RACON 8/12 7.6 mm 5.46.167.096/0209 RACON 4-49 PCB KEY SWITCHES RACON 8/12 - SPECIAL ACCESSORIES - Table (continued) - Plunger round 4 RACON Plunger diameter/size RACON version Length of plunger L Order no. 11.5 mm RACON 8 1.4 mm 5.46.167.227/0209 11.5 mm RACON 8 1.5 mm 5.46.167.061/0209 11.5 mm RACON 8 1.6 mm 5.46.167.060/0209 11.5 mm RACON 8/12 2 mm 5.46.167.067/0209 11.5 mm RACON 8/12 2.1 mm 5.46.167.064/0209 11.5 mm RACON 8/12 4.6 mm 5.46.167.043/0209 11.5 mm RACON 8/12 4.7 mm 5.46.167.050/0209 11.5 mm RACON 8/12 4.8 mm 5.46.167.047/0209 11.5 mm RACON 8/12 7.5 mm 5.46.167.059/0209 11.5 mm RACON 8/12 7.6 mm 5.46.167.058/0209 14.5 mm RACON 8 1.4 mm 5.46.168.227/0209 14.5 mm RACON 8 1.5 mm 5.46.168.061/0209 14.5 mm RACON 8 1.6 mm 5.46.168.060/0209 14.5 mm RACON 8/12 2 mm 5.46.168.067/0209 14.5 mm RACON 8/12 2.1 mm 5.46.168.064/0209 14.5 mm RACON 8/12 4.6 mm 5.46.168.043/0209 14.5 mm RACON 8/12 4.7 mm 5.46.168.050/0209 14.5 mm RACON 8/12 4.8 mm 5.46.168.047/0209 14.5 mm RACON 8/12 7.4 mm 5.46.168.044/0209 14.5 mm RACON 8/12 7.5 mm 5.46.168.059/0209 14.5 mm RACON 8/12 7.6 mm 5.46.168.058/0209 19 mm RACON 8 1.5 mm 5.46.169.061/0209 19 mm RACON 8 1.6 mm 5.46.169.060/0209 19 mm RACON 8/12 2 mm 5.46.169.067/0209 19 mm RACON 8/12 2.1 mm 5.46.169.064/0209 19 mm RACON 8/12 4.7 mm 5.46.169.050/0209 19 mm RACON 8/12 4.8 mm 5.46.169.047/0209 19 mm RACON 8/12 7.5 mm 5.46.169.059/0209 19 mm RACON 8/12 7.6 mm 5.46.169.058/0209 Front panel cut-out = Plunger diameter + 1 mm. 4-50 PCB KEY SWITCHES RACON 8/12 - SPECIAL ACCESSORIES Square plunger for membrane data entry system GH L A Technical data see page 4 - 49 Plunger diameter/size RACON version Length of plunger L Order no. 14 x 14 mm RACON 12 SMT 2 mm 5.46.001.057/0209 14 x 14 mm RACON 12 SMT 4.7 mm 5.46.001.058/0209 14 x 14 mm RACON 12 SMT 7.5 mm 5.46.001.059/0209 14 x 14 mm RACON 12 THT 2.1 mm 5.46.001.064/0209 14 x 14 mm RACON 12 THT 4.8 mm 5.46.001.060/0209 14 x 14 mm RACON 12 THT 7.6 mm 5.46.001.063/0209 Front panel cut-out = 15 x 15 mm. 4 RACON 4-51 PCB KEY SWITCHES RK 90 II, KEY CAP SYSTEM FOR RACON 12 RK 90 II Key cap system for RACON 12 with individual sealing Technical Data General information Thickness of front panel Light conductor Key grid Degree of protection 3.00 mm see order block min. 16.8 x 17.5 mm IP65 (DIN EN 60529) Other specifications ROHS compliant REACH compliant yes yes The key cap system RK 90 II has been developed especially fort he tactile switch RACON 12. The lenses are snapped onto the sealing frame and then set onto the RACON 12 key switches. The PCB presses this units against the front panel, so they are sealed. Two versions of the sealing frames are provided with light conductors, either in square ore triangle form. The lenses can be legended directly with laser. For bright letters (see picture) first white lenses are painted in dark, then the letters are cut out of the dark color with laser. 4 RACON 4-52 PCB KEY SWITCHES RK 90 II, KEY CAP SYSTEM FOR RACON 12 RK 90 II Sealing frame Technical data see page 4 - 52 Sealing frame with square light conductor Thickness of front panel Light conductor Order no. 3.00 mm square 5.05.004.901/0000 3.00 mm dreieckig 5.05.004.902/0000 3.00 mm - 5.05.004.903/0000 Legended lenses on request. Lenses: Lens RK Lens RK Lens RK Lens RK Lens RK Lens RK Lens RK Lens RK 90 90 90 90 90 90 90 90 II, II, II, II, II, II, II, II, white: 5.46.654.192/0200 red: 5.46.654.192/0300 yellow: 5.46.654.192/0400 green: 5.46.654.192/0500 blue: 5.46.654.192/0600 grey: 5.46.654.192/0700 grey (varnished): 5.46.654.192/6032 iron grey (varnished): 5.46.654.192/6033 4 RACON 4-53 PCB KEY SWITCHES RF - TACTILE SWITCHES RF Tactile switches RF 15 (15 x 15 mm) and RF 19 (19 x 19 mm) with distinct key click, for use under an overlay or with RK 90 keycaps. Can be fully illuminated. All products are RoHS compliant. 4 RF 4-55 PCB KEY SWITCHES RF - TACTILE SWITCHES Content 4 RF 15 - Tactile switches RF 15 - Tactile switch, non-illuminated RF 15 - Tactile switch, fully illuminated with 2 LED RF 15 - Tactile switch, 1 LED spot-illumination 4 4 4 4 RF 15 N - Tactile switches RF 15 N - Tactile switch, non-illuminated 4 - 62 4 - 66 RF 15 R - Tactile switches RF 15 R - Low tactile switch, non-illuminated RF 15 R - High tactile switch, non-illuminated RF 15 R - Low tactile switch, 1 LED spot-illumination RF 15 R - High tactile switch, 1 LED spot-illumination 4 4 4 4 4 RF 15 H - Tactile switches RF 15 H - Tactile switch, non-illuminated RF 15 H - Tactile switch, fully illuminated 4 - 73 4 - 76 4 - 76 RF 15 - Signal indicators RF 15 - Signal indicator, fully illuminated, 1 LED 4 - 78 4 - 80 RF 19 - Tactile switches RF 19 - Tactile switch, non-illuminated RF 19 - Tactile switch, fully illuminated with 2 LED RF 19 - Tactile switch, 1 LED spot-illumination 4 4 4 4 RF 19 H - Tactile switches RF 19 H - Tactile switch, non-illuminated RF 19 H - Tactile switch, fully illuminated 4 - 86 4 - 89 4 - 89 RF 19 - Signal indicators RF 19 - Signal indicator, 1/2 x 1-module RF 19 - Signal indicator, 1/2 x 2-module RF 19 - Signal indicator, 1 x 1-module RF 19 - Signal indicator, 1 x 2-module 4 4 4 4 4 - 91 93 93 94 94 RF 15/19 - Special accessories RF 15 N - Extension plunger, round head RF 15 N - Extension plunger, round head, with recess for LED RF 15 - Keycap, snap-on, for overall height 12.5 mm Spacer, round Spacer, triangular RF 15 N - LED spacer 4 4 4 4 4 4 4 - 95 95 96 96 97 98 99 RF 4-56 - - - 58 60 60 61 67 70 70 71 71 81 84 84 85 PCB KEY SWITCHES RF 15 - TACTILE SWITCHES Specifications LED LED brightness classes LEDs are subject to production-related variations in brightness over which we have no control with the manufacturers. It is therefore not possible to arrange a delivery in a specific brightness class, and deviations accordingly do not constitute grounds for complaint regarding our products. The majority of the LEDs we use are delivered from our suppliers in selected brightness classes. In this case, the brightness class is shown on a label on the switch's rack packaging. Where the lighting is required to have a uniform brightness - for aesthetic reasons, for example - this can be achieved in the system by means of the circuitry (with a series resistance, for example). 3 mm LED (valid for 25 C) Red LED Green LED Yellow LED Max. forward current lF: Current reduction from: T0 = 50 C: Wavelength typ: Forward voltage UF/lF typ: Reverse voltage UR/lF typ: Ambient temperature, operating: 30 mA approx 0.5 mA/C 635 nm 2 V/10 mA 5 V/100 A min. - 20 C . . . + 80 C 30 mA approx 0.5 mA/C 565 nm 2 V/10 mA 5 V/100 A min. - 20 C . . . + 80 C 20 mA approx 0.2 mA/C 586 nm 2 V/10 mA 5 V/100 A min. - 20 C . . . + 80 C Blue LED White LED Green LED superbright 20 mA approx 0.6 mA/C 470 nm 2.7 V/10 mA 5V/100 A min. - 20 C . . . + 80 C 25 mA 3.6 V/20 mA - 20 C . . . + 80 C 30 mA 510-545 nm 3.5 V/20 mA -30 C . . . + 100 C Max. forward current lF: Current reduction from: T0 = 50 C: Wavelength typ: Forward voltage UF/lF typ: Reverse voltage UR/lF typ: Ambient temperature, operating: 2 mm LED (full illumination of RF 15/19) (valid for 25 C) Red LED Green LED Yellow LED Max. forward current lF: Current reduction from: T0 = 50 C: Light current fV/lF typ: Wavelength typ: Forward voltage UF/lF typ: Reverse voltage UR/lF typ: Ambient temperature, operating: 30 mA 0.5 mA/C 637 nm 1.8 V/20 mA 5 V/100 A min. - 55 C . . . + 100 C 30 mA 0.5 mA/C 569 nm 2.1 V/10 mA 5 V/100 A min. - 40 C . . . + 100 C 50 mA 0.8 mA/C 250 mIm/20 mA 590 nm 1.9 V/20 mA 5 V/100 A min. -40 C . . . + 100 C Blue LED Multi-color LED 30 mA 464-485 nm 3.6 V/20 mA 30 mA approx 0.6 mA/C 635/565 nm 2 V/10 mA - 20 C . . . + 80 C 4 RF Max. forward current lF: Current reduction from: T0 = 50 C: Light current fV/lF typ: Wavelength typ: Forward voltage UF/lF typ: Reverse voltage UR/lF typ: Ambient temperature, operating: Calculating the series resistor: RV = UB - UF IF - 20 C . . . + 80 C Rated power of series: Example for 5 Volt: PV = IF2 x RV RV = 5V - 2,0 V = 150 (= standard value) 0,02 A 4-57 PCB KEY SWITCHES RF 15 - TACTILE SWITCHES RF 15 Tactile switches Low-profile keyboards with RF 15 components should be designed with a 19.05 mm grid. With this grid, frame webs remain free between the individual keys. The overlay can be glued onto these frame webs; we recommend area embossing over the keys for the overlays. Technical Data General information Color of lens Recommended key grid see order block 19.05 mm Dimensions Length Width Overall height 15 mm 15 mm 9.7 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED color LED type soldering in PCB THT snap-action contact 1 NO see order block see order block see order block see order block Mechanical characteristics Operating force max. Switching travel Robustness max. 0.6 N 2.9 0.5+0.2 mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Au: 0.02 V, Ag: 3 V 35 V Au: 0.01 mA, Ag: 0.1 mA Au: 100 mA, Ag: 250 mA Au: 2 W, Ag: 12.5 W 100 mE 109 E Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Operating life min. (operations) Solderability / solder heat resistance Wave soldering Manual soldering ROHS compliant REACH compliant -25 C +70 C acc. to IEC 60068-2-14, -30, -33 and -78 1,000,000 according to DIN EN 60068-2-20 260 C max. 350 C / 5 sec. max. yes yes 4 RF 4-58 PCB KEY SWITCHES RF 15 - TACTILE SWITCHES Typical force travel diagram Circuit diagrams RF 15 Actuating characteristics Force travel diagram Tactile switch, non-illuminated Tactile switch, fully-illuminated Tactile switch, spot-illuminated System assembly RF 15 4 PCB hole patterns RF 15 Hole patterns front panel RF 15 RF View on component side, all hole diameters 1.1 0.1 mm 4-59 PCB KEY SWITCHES RF 15 - TACTILE SWITCHES RF 15 Tactile switch, non-illuminated Technical data see page 4 - 58 Contact materials Illumination Color of lens LED color LED type Au not illuminated Ag not illuminated Order no. transparent - - 3.14.100.001/0000 transparent - - 3.14.100.006/0000 For keycaps, refer to chapter accessories and system RK 90. If exchangeable legends are required, or if an overall height of 12.5 mm is required, a keycap can be mounted on the non-illuminated keys. The keycap legend is visible through a window in the overlay. You can change the legend by replacing the keycap. RF 15 Tactile switch, fully illuminated with 2 LED Technical data see page 4 - 58 Overall height 4 Illuminated area 10.8 x 10.8 mm Housing Actuator Lens Contact materials Illumination Color of lens LED color LED type Order no. Au fully illuminated 2 LED red red 2 mm 3.14.200.011/0000 Au fully illuminated 2 LED yellow yellow 2 mm 3.14.200.013/0000 Au fully illuminated 2 LED orange yellow 2 mm 3.14.200.014/0000 Au fully illuminated 2 LED green green 2 mm 3.14.200.012/0000 Au fully illuminated 2 LED blue blue 2 mm 3.14.200.015/0000 Ag fully illuminated 2 LED red red 2 mm 3.14.200.021/0000 Ag fully illuminated 2 LED yellow yellow 2 mm 3.14.200.023/0000 Ag fully illuminated 2 LED orange yellow 2 mm 3.14.200.024/0000 RF 4-60 PCB KEY SWITCHES RF 15 - TACTILE SWITCHES - Table (continued) - RF 15 - Tactile switch, fully illuminated with 2 LED Contact materials Illumination Color of lens LED color LED type Order no. Ag fully illuminated 2 LED green green 2 mm 3.14.200.022/0000 Ag fully illuminated 2 LED blue blue 2 mm 3.14.200.025/0000 For keycaps, refer to RK 90 system design. Technical data of LED see seperate page at the beginning of this chapter. RF 15 Tactile switch, 1 LED spot-illumination Technical data see page 4 - 58 Contact materials Illumination Color of lens LED color LED type Order no. Au spot illumination 1 LED transparent red 3 mm 3.14.100.031/0000 Au spot illumination 1 LED transparent yellow 3 mm 3.14.100.033/0000 Au spot illumination 1 LED transparent green 3 mm 3.14.100.032/0000 Au spot illumination 1 LED opaque white blue 3 mm 3.14.100.030/0000 Ag spot illumination 1 LED transparent red 3 mm 3.14.100.041/0000 Ag spot illumination 1 LED transparent yellow 3 mm 3.14.100.043/0000 Ag spot illumination 1 LED transparent green 3 mm 3.14.100.042/0000 Ag spot illumination 1 LED transparent blue 3 mm 3.14.100.040/0000 4 RF Double-spot LED illumination available on request Technical data of LED see seperate page at the beginning of this chapter. 4-61 PCB KEY SWITCHES RF 15 N - TACTILE SWITCHES RF 15 N Tactile switches The RF 15N key switch provides a minimum overall height of 6.2 mm. The overall height can be varied by extension plungers which are inserted into the cross-like notches on the actuator tops. LEDs can only be arranged separately next to the key switches up to an overall height of 10 mm (i.e. without plunger or with small plunger). Key switches with overall heights of 12 mm or more can be provided with a maximum of 2 LEDs which are inserted into the recesses of the key switch housing. LEDs of key switches with overall heights of 12.5 mm or more should be placed onto LED spacers in order to obtain satisfactory illumination. Technical Data General information Color of lens Recommended key grid see order block 19.05 mm Dimensions Length Width Overall height 15 mm 15 mm 6.2 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination 4 RF 4-62 soldering in PCB THT snap-action contact 1 NO see order block external 3 mm LED possible if height more than 12 mm Mechanical characteristics Operating force max. Switching travel Robustness max. N 2.9 0.5+0.2 mm 100 with through-plated PCB N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Au: 0.02 V, Ag: 3 V 35 V Au: 0.01 mA, Ag: 0.1 mA Au: 100 mA, Ag: 250 mA Au: 2 W, Ag: 12.5 W 100 mE 109 E Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature max. (in tube) Environmental restistance Operating life min. (operations) Solderability / solder heat resistance Wave soldering Manual soldering ROHS compliant REACH compliant -25 C +70 C +50 C acc. to IEC 60068-2-14, -30, -33 and -78 1,000,000 according to DIN EN 60068-2-20 260 C max. 350 C / 5 sec. max. yes yes 0.6 PCB KEY SWITCHES RF 15 N - TACTILE SWITCHES Accessories RF 15 N - Tactile switch Description Photo Order no. Additional accessories see page RF 15 N - LED spacer O 5 mm, spacing length 2.2 mm, light grey, for use with overall height of 12.5 mm 5.30.109.010/0756 4 - 99 RF 15 N - Extension plunger, O 10 mm, overall height 22.5 mm 5.46.011.028/0710 4 - 95 RF 15 N - Extension plunger, O 15 mm, overall height 22.5 mm 5.46.017.028/0710 4 - 96 RF 15 N - Extension plunger, O 15 mm, overall height 22.5 mm 5.46.017.029/0710 - 4 RF 4-63 PCB KEY SWITCHES RF 15 N - TACTILE SWITCHES Typical force travel diagram Circuit diagrams RF 15 N Actuating characteristics Force travel diagram Tactile switch, non-illuminated Dimensional drawing RF 15 N 4 RF 4-64 Tactile switch, spot-illuminated PCB KEY SWITCHES RF 15 N - TACTILE SWITCHES Hole patterns front panel RF 15 N RF 15 N without plunger RF 15 N with plunger o 10 mm, not illuminated RF 15 N with plunger o 10 mm, illuminated RF 15 N with plunger o 15 mm, illuminated 4 PCB hole patterns RF 15 N RF View on component side, 0.1 mm all hole diameters 1.1 PCB layout switch 1/400" grid 4-65 PCB KEY SWITCHES RF 15 N - TACTILE SWITCHES RF 15 N Tactile switch, non-illuminated Technical data see page 4 - 62 Contact materials Au Ag Illumination external 3 mm LED possible if height more than 12 mm external 3 mm LED possible if height more than 12 mm For keycaps, refer to RK 90 system design. Double-spot LED illumination available on request. 4 RF 4-66 Recommended key grid Overall height Order no. 19.05 mm 6.2 mm 3.14.100.601/0000 19.05 mm 6.2 mm 3.14.100.606/0000 PCB KEY SWITCHES RF 15 R LOW - TACTILE SWITCHES RF 15 R Tactile switches The round actuator of the RF 15 R key switch requires round front panel cut-outs. These make it possible to use a narrow keyboard grid of only 15.24 mm with sufficiently large frame webs between the individual keys. We recommend area embossing over the actuators for the overlay. Technical Data General information Recommended key grid 15.24 mm Dimensions Length Width Overall height 15 mm 15 mm see order block Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED color LED type soldering in PCB THT snap-action contact 1 NO see order block see order block see order block see order block Mechanical characteristics Operating force max. Switching travel Robustness max. 0.6 N 2.9 0.5+0.2 mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Au: 0.02 V, Ag: 3 V 35 V Au: 0.01 mA, Ag: 0.1 mA Au: 100 mA, Ag: 250 mA Au: 2 W, Ag: 12.5 W 100 mE 109 E Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Operating life min. (operations) Solderability / solder heat resistance Wave soldering Manual soldering ROHS compliant REACH compliant -25 C +70 C acc. to IEC 60068-2-14, -30, -33 and -78 1,000,000 according to DIN EN 60068-2-20 260 C max. 350 C / 5 sec. max. yes yes 4 RF 4-67 PCB KEY SWITCHES RF 15 R LOW - TACTILE SWITCHES Typical force travel diagram Circuit diagrams RF 15 R Actuating characteristics Force travel diagram Tactile switch, non-illuminated Dimensional drawing RF 15 R 4 PCB hole patterns RF 15 R RF View on component side, 0.1 mm all hole diameters 1.1 PCB layout switch 1/400" grid 4-68 Tactile switch, spot-illuminated PCB KEY SWITCHES RF 15 R LOW - TACTILE SWITCHES Hole patterns front panel RF 15 R RF 15 R, not illuminated RF 15 R, illuminated 4 RF 4-69 PCB KEY SWITCHES RF 15 R LOW - TACTILE SWITCHES RF 15 R Low tactile switch, non-illuminated Technical data see page 4 - 67 Contact materials Overall height Illumination LED type LED color Au 9.7 mm Ag 9.7 mm Order no. not illuminated - - 3.14.100.501/0000 not illuminated - - 3.14.100.506/0000 RF 15 R High tactile switch, non-illuminated Technical data see page 4 - 67 4 Contact materials Overall height Illumination LED type LED color Au 12.5 mm Ag 12.5 mm Order no. not illuminated - - 3.14.100.801/0000 not illuminated - - 3.14.100.806/0000 RF 4-70 PCB KEY SWITCHES RF 15 R LOW - TACTILE SWITCHES RF 15 R Low tactile switch, 1 LED spot-illumination Technical data see page 4 - 67 Contact materials Overall height Illumination LED type LED color Order no. Au 9.7 mm spot illumination 1 LED 2 mm red 3.14.100.531/0000 Au 9.7 mm spot illumination 1 LED 2 mm yellow 3.14.100.533/0000 Au 9.7 mm spot illumination 1 LED 2 mm green 3.14.100.532/0000 Ag 9.7 mm spot illumination 1 LED 2 mm red 3.14.100.541/0000 Ag 9.7 mm spot illumination 1 LED 2 mm yellow 3.14.100.543/0000 Ag 9.7 mm spot illumination 1 LED 2 mm green 3.14.100.542/0000 Versions with 2 LEDs available on request. Technical data of LED see seperate page at the beginning of this chapter. 4 RF 15 R High tactile switch, 1 LED spot-illumination Technical data see page 4 - 67 RF Contact materials Overall height Illumination LED type LED color Order no. Au 12.5 mm spot illumination 1 LED 3 mm red 3.14.100.831/0000 Au 12.5 mm spot illumination 1 LED 3 mm yellow 3.14.100.833/0000 Au 12.5 mm spot illumination 1 LED 3 mm green 3.14.100.832/0000 4-71 PCB KEY SWITCHES RF 15 R LOW - TACTILE SWITCHES - Table (continued) - RF 15 R - High tactile switch, 1 LED spot-illumination Contact materials Overall height Illumination LED type LED color Order no. Au 12.5 mm spot illumination 1 LED 3 mm blue 3.14.100.830/0000 Versions with 2 LEDs available on request. Technical data of LED see seperate page at the beginning of the chapter. 4 RF 4-72 PCB KEY SWITCHES RF 15 H - TACTILE SWITCHES RF 15 H Tactile switches Application notes: The RF 15 H key has an overall height of 12.5 mm and can be fully illuminated. When designing membrane keyboards, we recommend using a key grid of at least 20 mm and a 0.13 mm overlay with area embossing over the keys. You can use the O-ring (accessory) to block the key and use it as an indicator field or blank spaceholder. Technical Data General information Color of lens Recommended key grid see order block 20 mm Dimensions Length Width Overall height 15 mm 15 mm 12.5 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED color LED type soldering in PCB THT snap-action contact 1 NO see order block see order block see order block see order block Mechanical characteristics Operating force max. Switching travel Robustness max. 0.6 N 2.9 0.5+0.2 mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Au: 0.02 V, Ag: 3 V 35 V Au: 0.01 mA, Ag: 0.1 mA Au: 100 mA, Ag: 250 mA Au: 2 W, Ag: 12.5 W 100 mE 109 E Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Operating life min. (operations) Solderability / solder heat resistance Wave soldering Manual soldering ROHS compliant REACH compliant -25 C +70 C acc. to IEC 60068-2-14, -30, -33 and -78 1,000,000 according to DIN EN 60068-2-20 260 C max. 350 C / 5 sec. max. yes yes 4 RF 4-73 PCB KEY SWITCHES RF 15 H - TACTILE SWITCHES Accessories RF 15 H - Tactile switch Description O-ring, black, 16.0 x 1, for blocking RF 19H keys 4 RF 4-74 Photo Order no. 5.30.125.007/0100 Additional accessories see page 5 - 31 PCB KEY SWITCHES RF 15 H - TACTILE SWITCHES Typical force travel diagram RF 15 H Curcuit diagram RF 15 H Actuating characteristics Force travel diagram Tactile switch, non-illuminated Tactile switch, fully-illuminated Dimensional drawing RF 15 H 4 Hole Pattern Hole Pattern - Front Panel RF View on component side. 4-75 PCB KEY SWITCHES RF 15 H - TACTILE SWITCHES RF 15 H Tactile switch, non-illuminated Technical data see page 4 - 73 overall height housing actuator lens Contact materials Illumination Color of lens Au not illuminated Ag not illuminated illuminated area LED color LED type Order no. white - - 3.14.100.702/0000 white - - 3.14.100.707/0000 RF 15 H Tactile switch, fully illuminated Technical data see page 4 - 73 housing actuator lens overall height 4 RF 4-76 illuminated area Contact materials Illumination Color of lens LED color LED type Order no. Au fully illuminated 2 LED red red 2 mm 3.14.200.731/0000 Au fully illuminated 2 LED yellow yellow 2 mm 3.14.200.733/0000 Au fully illuminated 2 LED orange yellow 2 mm 3.14.200.738/0000 Au fully illuminated 1 LED green green super bright 3 mm 3.14.200.736/0000 Au fully illuminated 2 LED green green 2 mm 3.14.200.732/0000 Au fully illuminated 1 LED blue blue 3 mm 3.14.200.739/0000 Au fully illuminated 1 LED white white 3 mm 3.14.200.735/0000 Ag fully illuminated 2 LED red red 2 mm 3.14.200.741/0000 Ag fully illuminated 2 LED yellow yellow 2 mm 3.14.200.743/0000 Ag fully illuminated 2 LED orange yellow 2 mm 3.14.200.748/0000 Ag fully illuminated 1 LED green green super bright 3 mm 3.14.200.746/0000 PCB KEY SWITCHES RF 15 H - TACTILE SWITCHES - Table (continued) - RF 15 H - Tactile switch, fully illuminated Contact materials Illumination Color of lens LED color LED type Order no. Ag fully illuminated 2 LED green green 2 mm 3.14.200.742/0000 Ag fully illuminated 1 LED blue blue 3 mm 3.14.200.749/0000 Ag fully illuminated 1 LED white white 3 mm 3.14.200.745/0000 When using the key switches with multicolor LEDs the illumination color can be varied from red to green by change of polarity. Due to the frequency of the polarity-changes the colors red, green, yellow as well as all secondary colors from these are possible. Technical data of LED see separate page at the beginning of this chapter. 4 RF 4-77 PCB KEY SWITCHES RF 15 - SIGNAL INDICATORS RF 15 Signal indicators Technical Data 4 RF 4-78 General information Color of lens Recommended key grid see order block 19.05 mm Dimensions Length Width Overall height 15 mm 15 mm 9.15 mm Mechanical design Mounting Illumination LED color LED type THT soldering in PCB fully illuminated 1 LED see order block 2 mm Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Solderability / solder heat resistance Wave soldering Manual soldering ROHS compliant REACH compliant -25 C +70 C acc. to IEC 60068-2-14, -30, -33 and -78 according to DIN EN 60068-2-20 260 C max. 350 C / 5 sec. max. yes yes PCB KEY SWITCHES RF 15 - SIGNAL INDICATORS System assembly RF 15 signal indicator PCB hole patterns RF 15 Hole patterns front panel RF 15 4 View on component side, all hole diameters 1.1 0.1 mm RF 4-79 PCB KEY SWITCHES RF 15 - SIGNAL INDICATORS RF 15 Signal indicator, fully illuminated, 1 LED Technical data see page 4 - 78 Overall height Illumination Color of lens LED color LED type Order no. 9.15 mm fully illuminated 1 LED red red 2 mm 3.14.200.051/0000 9.15 mm fully illuminated 1 LED yellow yellow 2 mm 3.14.200.053/0000 9.15 mm fully illuminated 1 LED orange yellow 2 mm 3.14.200.054/0000 9.15 mm fully illuminated 1 LED green green 2 mm 3.14.200.052/0000 9.15 mm fully illuminated 1 LED blue blue 2 mm 3.14.200.055/0000 Technical data of LED see separate page at the beginning of chapter 4 PCB Key switches. 4 RF 4-80 PCB KEY SWITCHES RF 19 - TACTILE SWITCHES RF 19 Tactile switches Application notes: RF 19 keys offer a large actuation area. When designing low-profile keyboards with a grid of = 23 mm, frame webs remain free between the individual keys. The overlay can be glued onto these frame webs; we recommend area embossing over the keys for the overlay. Technical Data General information Color of lens Recommended key grid see order block 23 mm Dimensions Length Width Overall height 19.05 mm 19.05 mm 9.7 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED color LED type soldering in PCB THT snap-action contact 1 NO see order block see order block see order block see order block Mechanical characteristics Operating force max. Switching travel Robustness max. 0.6 N 2.9 +0.2 0.5 mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Au: 0.02 V, Ag: 3 V 35 V Au: 0.01 mA, Ag: 0.1 mA Au: 100 mA, Ag: 250 mA Au: 2 W, Ag: 12.5 W 100 mE 109 E Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Operating life min. (operations) Solderability / solder heat resistance Wave soldering Manual soldering ROHS compliant REACH compliant -25 C +70 C acc. to IEC 60068-2-14, -30, -33 and -78 1,000,000 according to DIN EN 60068-2-20 260 C max. 350 C / 5 sec. max. yes yes 4 RF 4-81 PCB KEY SWITCHES RF 19 - TACTILE SWITCHES Typical force travel diagram RF 19 Circuit diagrams RF 19 Actuating characteristics Force travel diagram Hole patterns (view on component side) Tactile switch, non-illuminated System assembly RF 19 4 RF 4-82 Tactile switch, fully-illuminated Tactile switch, spot-illuminated PCB KEY SWITCHES RF 19 - TACTILE SWITCHES PCB hole patterns RF 19 * The LED may be positioned either on the left-hand or right-hand side. Standard version: LED on left-hand side 0.1 mm View on component side, all hole diameters 1.1 Hole patterns front panel RF 19 4 RF 4-83 PCB KEY SWITCHES RF 19 - TACTILE SWITCHES RF 19 Tactile switch, non-illuminated Overall hight Technical data see page 4 - 81 Contact materials Illumination Color of lens Au not illuminated Ag not illuminated Housing Actuator LED color LED type Order no. transparent - - 3.14.001.001/0000 transparent - - 3.14.001.006/0000 RF 19 Tactile switch, fully illuminated with 2 LED Technical data see page 4 - 81 4 RF 4-84 Contact materials Illumination Color of lens LED color LED type Order no. Au fully illuminated 2 LED red red 2 mm 3.14.002.011/0000 Au fully illuminated 2 LED yellow yellow 2 mm 3.14.002.013/0000 Au fully illuminated 2 LED orange yellow 2 mm 3.14.002.014/0000 Au fully illuminated 2 LED green green 2 mm 3.14.002.012/0000 Au fully illuminated 2 LED blue blue 2 mm 3.14.002.015/0000 Au fully illuminated 2 LED opaque white green 2 mm 3.14.002.901/0000 Ag fully illuminated 2 LED red red 2 mm 3.14.002.021/0000 Ag fully illuminated 2 LED yellow yellow 2 mm 3.14.002.023/0000 Ag fully illuminated 2 LED orange yellow 2 mm 3.14.002.024/0000 Ag fully illuminated 2 LED green green 2 mm 3.14.002.022/0000 PCB KEY SWITCHES RF 19 - TACTILE SWITCHES - Table (continued) - RF 19 - Tactile switch, fully illuminated with 2 LED Contact materials Illumination Color of lens LED color LED type Order no. Ag fully illuminated 2 LED blue blue 2 mm 3.14.002.025/0000 Ag fully illuminated 2 LED white yellow 2 mm 3.14.002.027/0000 Ag fully illuminated 2 LED white green 2 mm 3.14.002.026/0000 Ag fully illuminated 2 LED opaque white green 2 mm 3.14.002.944/0000 Technical data of LED see separate page at the beginning of this chapter. RF 19 Tactile switch, 1 LED spot-illumination Technical data see page 4 - 81 Contact materials Illumination Color of lens LED color LED type Order no. Au spot illumination 1 LED transparent red 3 mm 3.14.001.031/0000 Au spot illumination 1 LED transparent yellow 3 mm 3.14.001.033/0000 Au spot illumination 1 LED transparent green 3 mm 3.14.001.032/0000 Au spot illumination 1 LED opaque white blue 3 mm 3.14.001.030/0000 Ag spot illumination 1 LED transparent red 3 mm 3.14.001.041/0000 Ag spot illumination 1 LED transparent yellow 3 mm 3.14.001.043/0000 Ag spot illumination 1 LED transparent green 3 mm 3.14.001.042/0000 Ag spot illumination 1 LED transparent blue 3 mm 3.14.001.040/0000 4 RF Versions with 2 LEDs available on request. Technical data of LED see separate page at the beginning of this chapter. 4-85 PCB KEY SWITCHES RF 19 H - TACTILE SWITCHES RF 19 H Tactile switches Application notes: The RF 19H key has an overall height of 12.5 mm and can be fully illuminated. When designing membrane keyboards, we recommend using a key grid of at least 24 mm and a 0.13 mm overlay with area embossing over the keys. You can use the O-ring (accessory) to block the key and use it as an indicator field or blank spaceholder. Technical Data General information Color of lens Recommended key grid see order block 24 mm Dimensions Length Width Overall height 19.05 mm 19.05 mm 12.5 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED color LED type soldering in PCB THT snap-action contact 1 NO see order block see order block see order block see order block Mechanical characteristics Operating force max. Switching travel Robustness max. 0.6 N 2.9 0.5+0.2 mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Au: 0.02 V, Ag: 3 V 35 V Au: 0.01 mA, Ag: 0.1 mA Au: 100 mA, Ag: 250 mA Au: 2 W, Ag: 12.5 W 100 mE 109 E Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Operating life min. (operations) Solderability / solder heat resistance Wave soldering Manual soldering ROHS compliant REACH compliant -25 C +70 C acc. to IEC 60068-2-14, -30, -33 and -78 1,000,000 according to DIN EN 60068-2-20 260 C max. 350 C / 5 sec. max. yes yes 4 RF 4-86 PCB KEY SWITCHES RF 19 H - TACTILE SWITCHES Accessories RF 19 H - Tactile switch Description O-ring, black, 16.0 x 1, for blocking RF 19H keys Photo Order no. 5.30.125.007/0100 Additional accessories see page 5 - 31 4 RF 4-87 PCB KEY SWITCHES RF 19 H - TACTILE SWITCHES Typical force travel diagram Circuit diagrams RF 19 H Actuating characteristics Force travel diagram Tactile switch, non-illuminated Tactile switch, fully-illuminated System assembly RF 19 H 4 PCB hole patterns RF 19 H RF View on component side, all hole diameters 1.1 0.1 mm 4-88 Hole patterns front panel RF 19 H PCB KEY SWITCHES RF 19 H - TACTILE SWITCHES RF 19 H Tactile switch, non-illuminated Technical data see page 4 - 86 Contact materials Illumination Color of lens LED color LED type Au not illuminated Ag not illuminated Order no. white - - 3.14.001.501/0000 white - - 3.14.001.506/0000 RF 19 H Tactile switch, fully illuminated Technical data see page 4 - 86 4 Contact materials Illumination Color of lens LED color LED type Order no. Au fully illuminated 2 LED red red 2 mm 3.14.002.613/0000 Au fully illuminated 2 LED yellow yellow 2 mm 3.14.002.653/0000 Au fully illuminated 2 LED orange yellow 2 mm 3.14.002.673/0000 Au fully illuminated 1 LED green green super bright 3 mm 3.14.002.633/0000 Au fully illuminated 2 LED green green 2 mm 3.14.002.632/0000 Au fully illuminated 1 LED blue blue 3 mm 3.14.002.683/0000 Au fully illuminated 1 LED white white 3 mm 3.14.002.684/0000 Ag fully illuminated 2 LED red red 2 mm 3.14.002.623/0000 Ag fully illuminated 2 LED yellow yellow 2 mm 3.14.002.663/0000 Ag fully illuminated 2 LED orange yellow 2 mm 3.14.002.678/0000 Ag fully illuminated 1 LED green green super bright 3 mm 3.14.002.643/0000 4-89 RF PCB KEY SWITCHES RF 19 H - TACTILE SWITCHES - Table (continued) - RF 19 H - Tactile switch, fully illuminated Contact materials Illumination Color of lens LED color LED type Order no. Ag fully illuminated 2 LED green green 2 mm 3.14.002.642/0000 Ag fully illuminated 1 LED blue blue 3 mm 3.14.002.688/0000 Ag fully illuminated 1 LED white white 3 mm 3.14.002.689/0000 When using the key switches with multicolor LEDs the illumination color can be varied from red to green by change of polarity. Due to the frequency of the polarity-changes the colors red, green, yellow as well as all secondary colors from these are possible. Technical data of LED see separate page at the beginning of this chapter. 4 RF 4-90 PCB KEY SWITCHES RF 19 - SIGNAL INDICATORS RF 19 Signal indicators Technical Data General information Color of lens Recommended key grid see order block 23/x mm Dimensions Length Width Overall height see order block see order block 9.15 mm Mechanical design Mounting Illumination LED color LED type THT soldering in PCB see order block see order block see order block Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Solderability / solder heat resistance Wave soldering Manual soldering ROHS compliant REACH compliant -25 C +70 C acc. to IEC 60068-2-14, -30, -33 and -78 according to DIN EN 60068-2-20 260 C max. 350 C / 5 sec. max. yes yes 4 RF 4-91 PCB KEY SWITCHES RF 19 - SIGNAL INDICATORS System assembly RF 19 signal indicator PCB hole pattern RF 19 4 * The LED may be positioned either on the left-hand or right-hand side. Standard version: LED on left-hand side 0.1 mm View on component side, all hole diameters 1.1 RF Hole patterns front panel = size of indicator + 1 mm 4-92 PCB KEY SWITCHES RF 19 - SIGNAL INDICATORS RF 19 Signal indicator, 1/2 x 1-module Technical data see page 4 - 91 Housing Lens Illuminated area 16.4 x 7.8 mm Illumination Color of lens LED color LED type Order no. fully illuminated 1 LED red red 2 mm 3.14.002.061/0000 fully illuminated 1 LED yellow yellow 2 mm 3.14.002.063/0000 fully illuminated 1 LED orange yellow 2 mm 3.14.002.064/0000 fully illuminated 1 LED green green 2 mm 3.14.002.062/0000 Technical data of LED see separate page at the beginning of chapter 4 PCB Key switches. RF 19 Signal indicator, 1/2 x 2-module Technical data see page 4 - 91 4 Illumination Color of lens LED color LED type Order no. fully illuminated 3 LED red red 2 mm 3.14.002.908/0000 fully illuminated 3 LED yellow yellow 2 mm 3.14.002.910/0000 fully illuminated 3 LED orange yellow 2 mm 3.14.002.911/0000 fully illuminated 3 LED green green 2 mm 3.14.002.909/0000 Technical data of LED see separate page at the beginning of chapter 4 PCB Key switches. 4-93 RF PCB KEY SWITCHES RF 19 - SIGNAL INDICATORS RF 19 Signal indicator, 1 x 1-module Technical data see page 4 - 91 Illumination Color of lens LED color LED type Order no. fully illuminated 2 LED red red 2 mm 3.14.002.051/0000 fully illuminated 2 LED yellow yellow 2 mm 3.14.002.053/0000 fully illuminated 2 LED orange yellow 2 mm 3.14.002.054/0000 fully illuminated 2 LED green green 2 mm 3.14.002.052/0000 fully illuminated 2 LED blue blue 2 mm 3.14.001.659/0000 For technical data of the LED see separate page at the beginning of chapter RF tactile switches" Suitable for RK 90 system design, illuminated for 2-module keycap. RF 19 Signal indicator, 1 x 2-module 4 Technical data see page 4 - 91 RF Illumination Color of lens LED color LED type Order no. fully illuminated 5 LED red red 2 mm 3.14.002.071/0000 fully illuminated 5 LED yellow yellow 2 mm 3.14.002.073/0000 fully illuminated 5 LED orange yellow 2 mm 3.14.002.074/0000 fully illuminated 5 LED green green 2 mm 3.14.002.072/0000 For technical data of the LED see separate page at the beginning of chapter RF tactile switches" 4-94 PCB KEY SWITCHES RF 15/19 - SPECIAL ACCESSORIES RF 15/19 Special accessories RF 15 N Extension plunger, round head 4 Length Width Overall height Diameter Color Order no. - 9 mm 10 mm - 5.46.011.036/0710 - 9.7 mm 10 mm - 5.46.011.030/0710 - 12.5 mm 10 mm - 5.46.011.037/0710 - 13 mm 10 mm - 5.46.011.038/0710 - 22.5 mm 10 mm - 5.46.011.028/0710 RF Length of plunger = Overall height - 4.25 mm. 4-95 PCB KEY SWITCHES RF 15/19 - SPECIAL ACCESSORIES RF 15 N Extension plunger, round head, with recess for LED Length Width Overall height Diameter Color Order no. - 9 mm 15 mm - 5.46.017.036/0710 - 9.7 mm 15 mm - 5.46.017.030/0710 - 12.5 mm 15 mm - 5.46.017.037/0710 - 22.5 mm 15 mm - 5.46.017.028/0710 - 13 mm 15 mm - 5.46.017.038/0710 Length of plunger = Overall height - 4.25 mm. RF 15 Keycap, snap-on, for overall height 12.5 mm 4 RF 4-96 Length Width Overall height 14.2 mm 14.2 mm 12.5 mm Diameter - Color Order no. beige 5.46.654.059/0227 PCB KEY SWITCHES RF 15/19 - SPECIAL ACCESSORIES Spacer, round Overlay Front panel Spacer PCB Length L Color Order no. 3.50 mm blue transparent 5.30.759.023/0000 4.75 mm blue transparent 5.30.759.028/0000 5.25 mm yellow orange transparent 5.30.759.030/0000 4.50 mm red 5.30.759.027/0000 5.50 mm yellow 5.30.759.031/0000 4 mm green 5.30.759.025/0000 5.75 mm green 5.30.759.032/0000 4.25 mm blue 5.30.759.026/0000 6 mm blue 5.30.759.033/0000 6.2 mm blue 5.30.759.251/0000 5 mm black 5.30.759.029/0000 10.00 mm black 5.30.759.043/0104 6.25 mm red 5.30.759.034/0000 6.50 mm blue transparent 5.30.759.035/0000 6.75 mm black 5.30.759.036/0000 7 mm yellow orange transparent 5.30.759.037/0000 7.25 mm yellow 5.30.759.038/0000 7.50 mm green 5.30.759.039/0000 7.75 mm blue 5.30.759.040/0000 8 mm red 5.30.759.041/0000 8.25 mm blue transparent 5.30.759.042/0000 Required spacer length For keyboards: Overall height of key - front panel thickness - 0.5 mm (area embossing). For RAFIX 22 FS: 9.25 mm - front panel thickness -thickness of overlay, if existing 4-97 4 RF PCB KEY SWITCHES RF 15/19 - SPECIAL ACCESSORIES Spacer, triangular Overlay Front panel Spacer PCB Countersink from height > 4 mm triangular version 4 RF 4-98 Length L Order no. 2.50 mm 5.30.759.094/0000 2.75 mm 5.30.759.095/0000 3 mm 5.30.759.096/0000 3.25 mm 5.30.759.097/0000 3.50 mm 5.30.759.098/0000 3.75 mm 5.30.759.099/0000 4 mm 5.30.759.100/0000 4.25 mm 5.30.759.101/0000 4.50 mm 5.30.759.102/0000 4.75 mm 5.30.759.103/0000 5 mm 5.30.759.104/0000 5.25 mm 5.30.759.105/0000 5.50 mm 5.30.759.106/0000 5.75 mm 5.30.759.107/0000 6 mm 5.30.759.108/0000 6.2 mm 5.30.759.253/0000 10.00 mm 5.30.759.124/0000 10.25 mm 5.30.759.125/0000 6.25 mm 5.30.759.109/0000 6.50 mm 5.30.759.110/0000 6.75 mm 5.30.759.111/0000 7 mm 5.30.759.112/0000 7.25 mm 5.30.759.113/0000 7.50 mm 5.30.759.114/0000 7.75 mm 5.30.759.115/0000 8 mm 5.30.759.116/0000 8.25 mm 5.30.759.117/0000 9 mm 5.30.759.254/0000 PCB KEY SWITCHES RF 15/19 - SPECIAL ACCESSORIES - Table (continued) - Spacers, triangular Required spacer length = Overall height of key - front panel thickness - 0.5 mm (area embossing). RF 15 N LED spacer Length Width Overall height Diameter Color Order no. 2.2 mm - 12.5 mm 5 mm light grey 5.30.109.010/0756 12 mm - 22.5 mm 5 mm black 5.30.109.019/0105 4 RF 4-99 PCB KEY SWITCHES KN 19 - SHORT-TRAVEL MAIN SWITCH KN 19 Short-travel main switch Short-travel main switch for use in membrane keyboards under the overlay or with RK 90 keycaps, 250V, 4A max. A cut-out in the overlay is not required! s All products are RoHS compliant. 4 KN 19 4-101 PCB KEY SWITCHES KN 19 - SHORT-TRAVEL MAIN SWITCH Content KN 19 - Short-travel main switches KN 19 - Short-travel main switch 4 KN 19 4-102 4 - 103 4 - 104 PCB KEY SWITCHES KN 19 - SHORT-TRAVEL MAIN SWITCH KN 19 Short-travel main switches The KN 19 makes it possible to implement a power switch directly in a lowprofile data entry system. This eliminates the need for extra switches on the device and additional openings in the overlay. In this way, you can achieve an optimum of safety and a consistent design. The contact opening widths comply with the VDE standards. The KN 19 can also be employed underneath RK 90 keycaps. Other actuation functions (momentary, latching/momentary) available on request. Technical Data General information Recommended key grid 19.05 x 38.1 mm Dimensions Length Width Overall height 37.8 mm 18.8 mm 9.7 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination Degree of protection Hot wire ignition acc. to IEC 60695-2-1 on PCB THT solder terminals snap-action bridge contact see order block Ag 1 LED (max. 3 mm) possible IP40 (DIN EN 60529) 850 C Mechanical characteristics Operating force max. Operating travel Robustness max. 9 N 0.550.15 mm 100 N Electrical characteristics Rated voltage AC min. Rated voltage DC min. Rated voltage AC max. Rated voltage DC max. Ohmic load AC Ohmic load DC max. Ohmic load DC min. Contact resistance when new max. Capacity input current AC max. Rated motor current AC Rated filament lamp current AC Bouncing time max. 12 V 12 V 250 V 50 V 6A 10 A 0.1 A 50 mE 100 A 4A 2.4 A 10 ms Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Operating life AC Operating life DC Soldering time max. Soldering temperature max. Flame class acc. to UL 94 ROHS compliant REACH compliant -25 C +70 C acc. to IEC 60068-2-14, -30, -33 and -78 AC 250 V: 200.000 /2A; 100.000 /6A 50,000(10 A / 50 V=) 3s 350 C UL 94 VO yes yes Approvals IEC 61058 3 UL 508,C22.2 No. 14-M91 4 KN 19 4-103 PCB KEY SWITCHES KN 19 - SHORT-TRAVEL MAIN SWITCH Accessories KN 19 - Short-travel main switch Description Photo Order no. KN19 - Absorption rubber Additional accessories see page 5.30.729.009/0000 - Circuit diagrams 2 NC/2 NO 1 NC + 1 NO Dimensional drawing PCB hole pattern Definition "ON" "OFF" only valid for 2-pole version. Locating hole only version 2 NO/2 NC View on component side KN 19 Short-travel main switch 4 Technical data see page 4 - 103 PCB footprint KN 19 Contact arrangement Rated voltage AC max. Order no. 1 NC + 1 NO 250 V 1.12.000.001/0000 2 NC / 2 NO 250 V 1.12.000.501/0000 For keycaps, refer to RK 90 system design. Positive opening NC contacts to IEC 60 947-5-1. 1-LED spot-illumination (max. 3 mm) possible. Accessoires: KN19 - Absorption rubber: 5.30.729.009/0000 4-104 PCB KEY SWITCHES RK 90 - KEYCAPS RK 90 Keycaps Keycaps for RACON, RF 15 / RF 19 and KN 19 tactile switches s You can insert a legend insert between lens and pressure pad of the transparent keycaps. s All products are RoHS compliant. 4 RK 90 4-105 PCB KEY SWITCHES RK 90 - KEYCAPS Content RK 90 - Keycaps, plastic, 9 x 9 mm RK 90 - Keycap body plastic, for lenses 9 x 9 mm 4 - 109 4 - 110 RK 90 - Keycaps, plastic, 14 mm RK 90 - Keycap body plastic, for lenses 14 mm, 1-module RK 90 - Keycap body plastic, for lenses 11/4-module RK 90 - Keycap body plastic, for lenses 14 mm, 11/2-module RK 90 - Keycap body plastic, for lenses 2-module 4 - 111 4 - 112 4 - 112 4 - 113 4 - 114 RK 90 - Keycaps, aluminum, 14 x 14 mm RK 90 - Keycaps, aluminum, 14 mm, 1-module RK 90 - Keycaps, aluminum, 14 mm, 11/2-module RK 90 - Keycaps, aluminum, 14 mm, 2-module 4 - 115 4 - 116 4 - 116 4 - 117 RK 90 - Special accessories RK 90 - Fin, to avoid inadvertent operation RK 90 - Spacer M 4 RK 90 - Silicone foil 4 - 118 4 - 118 4 - 119 4 - 119 4 RK 90 4-106 PCB KEY SWITCHES RK 90 - KEYCAP SYSTEM Keycap system RK 90 Example with RF 15 key switches. Instead of RF 15 following key switches can be used: - MICON 5 - RACON 8/12 - RF 15 tactile switches and signal indicators - RF 19 tactile switches and signal indicators - Short-travel main switch KN 19 The RK 90 system was granted the prize of the Design Forum of the Hannover Fair. Degree of protection: IP65 according to DIN in front of the panel, with silicone sealing. Installation methods Mounting from front Sealing foil between RK 90 keyboard and customer's front panel. Mounting from rear Sealing foil is screwed to RK 90 panel with fixing rails; sealing between keyboard and customer's front panel has to be provided. 4 Legending L Laser printing: This labelling method is possible for opaque keycaps. The symbols are engraved in the keycaps with laser. L When using transparent lenses, the pressure pad can be legended by printing. As the legending is protected by the lens, it is frictionproof. L Engraving: With this method the keycaps are engraved with the required symbol and then inlaid with ink. RK 90 4-107 PCB KEY SWITCHES RK 90 - KEYCAP SYSTEM Recommendations L Front panel thickness: - Aluminum: 2 mm (1.5 mm min, 3 mm max.) (Fixing with M 3 pressed-in studs) - Steel: 2 mm (3 mm max.): V2A: 1.25 mm (Fixing with M 3 welded-on studs) The keytop surface is flush with the keyboard at a panel thickness of 3.5 mm. Cleaning liquids For the cleaning of the plastic keycaps please do not use cleaning liquids based on alcohol or acid. 4 RK 90 4-108 L Silicone sealing: Material: Silicone transparent Type: A-SY 40-79 Hardness: 30 shore +/- 5 Thickness: 0.45 +/- 0.05 mm L Installation: Ensure that the keyboard slopes slightly so that any liquid can drain away between front panel and silicone sealing; if necessary, provide additional drain holes in the front panel. PCB KEY SWITCHES RK 90 - KEYCAPS, PLASTIC, 9 X 9 MM RK 90 Keycaps, plastic, 9 x 9 mm Steel stud welded-on with steel version pressed-in with aluminum version Keycap Sealing Front panel Housing You can design especially small input fields with the small keycap 9 x 9 mm. For example, controls for measurement and laboratory equipment which do not offer much space for input fields because of their small size. RK 90 keycaps 9 x 9 mm and RACON tactile switches can be used to implement key grids of only 12.5 mm. The keycaps can be legended by laserprinting, engraving or standard printing. This keycap is our first choice in a combination with the illuminated RACON 12 i tactile switch. Please note: For the cleaning of the plastic keycaps please do not use cleaning liquids based on alcohol or acid. Technical Data General information Color of lens Size Degree of protection (with silicon seal) Illuminability see order block 1-module IP65 (DIN EN 60529) see order block Dimensions Dimension keycap in front of front panel Dimension keycap behind front panel Dimension (c) hole patterns final size Dimension hole patterns punched size 8.85 x 8.85 mm 11.5 x 11.5 mm 9.00 x 9.00 mm 9.20 x 9.20 mm Other specifications ROHS compliant REACH compliant yes yes 4 Please order lens separately. RK 90 4-109 PCB KEY SWITCHES RK 90 - KEYCAPS, PLASTIC, 9 X 9 MM RK 90 Keycap body plastic, for lenses 9 x 9 mm Technical data see page 4 - 109 Final size Punched size Size Illuminability Dimension keycap behind front panel 1-module yes 11.5 x 11.5 mm Laser printed opaque lenses and keycap sets on request. Please order lenses separately. Lenses: RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, 4 RK 90 4-110 9 9 9 9 9 9 9 9 9 x x x x x x x x x 9 9 9 9 9 9 9 9 9 mm, mm, mm, mm, mm, mm, mm, mm, mm, opaque red: 5.46.651.015/0309 opaque yellow: 5.46.651.015/0409 opaque green: 5.46.651.015/0514 opaque blue: 5.46.651.015/0611 opaque light grey: 5.46.651.015/0700 transparent colorless: 5.46.651.019/1002 transparent red: 5.46.651.019/1307 transparent yellow: 5.46.651.019/1403 transparent green: 5.46.651.019/1510 Dimension keycap in Dimension (c) hole Order no. front of front panel patterns final size 8.85 x 8.85 mm 9.00 x 9.00 mm 5.55.103.265/1013 PCB KEY SWITCHES RK 90 - KEYCAPS, PLASTIC 14 MM RK 90 Keycaps, plastic, 14 mm Keycap system for 19.05 mm grid. The keycaps can be legended by laserprinting, engraving or standard printing. Keycaps / sets with legends and other keycap shapes / colors available on request. Please note: For the cleaning of the plastic keycaps please do not use cleaning liquids based on alcohol or acid. Technical Data General information Color of lens Size Degree of protection (with silicon seal) Illuminability see order block see order block IP65 (DIN EN 60529) yes Dimensions Dimension (b) in front of front panel Dimension (a) behind front panel Dimension (c) hole patterns final size Dimension hole patterns punched size see order block see order block see order block see order block Other specifications ROHS compliant REACH compliant yes yes 4 RK 90 4-111 PCB KEY SWITCHES RK 90 - KEYCAPS, PLASTIC 14 MM RK 90 Keycap body plastic, for lenses 14 mm, 1-module Final size Punched size Technical data see page 4 - 111 Size Illuminability Dimension (a) behind front panel 1-module yes Lenses: RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, 14 14 14 14 14 14 14 14 14 x x x x x x x x x 17.20 x 17.20 mm 14 14 14 14 14 14 14 14 14 mm, mm, mm, mm, mm, mm, mm, mm, mm, 1-module, 1-module, 1-module, 1-module, 1-module, 1-module, 1-module, 1-module, 1-module, Dimension (b) in front of front panel Dimension (c) hole Order no. patterns final size 13.85 x 13.85 mm 14.00 x 14.00 mm 5.55.103.030/1013 opaque red: 5.46.681.001/0309 opaque yellow: 5.46.681.001/0409 opaque green: 5.46.681.001/0514 opaque blue: 5.46.681.001/0611 opaque light grey: 5.46.681.001/0700 transparent colorless: 5.46.681.021/1002 transparent red: 5.46.681.021/1307 transparent yellow: 5.46.681.021/1403 transparent green: 5.46.681.021/1510 RK 90 Keycap body plastic, for lenses 11/4-module 4 Final size Punched size Technical data see page 4 - 111 RK 90 Size Illuminability Dimension (a) behind front panel Dimension (b) in front of front panel Dimension (c) hole patterns final size Order no. 1 11/4-module yes 17.20 x 20.7 mm 13.85 x 17.35 mm 14,00 x 17,5 mm 5.55.103.031/1013 Lenses: RK 90 - Lens, 14 mm, 1.25-module, opaque red: 5.46.681.002/0309 4-112 PCB KEY SWITCHES RK 90 - KEYCAPS, PLASTIC 14 MM - Table (continued) - RK 90 - Keycap body plastic, for lenses 11/4-module RK RK RK RK RK 90 90 90 90 90 - Lens, Lens, Lens, Lens, Lens, 14 14 14 14 14 mm, mm, mm, mm, mm, 1.25-module, 1.25-module, 1.25-module, 1.25-module, 1.25-module, opaque light grey: 5.46.681.002/0700 transparent colorless: 5.46.681.022/1002 transparent red: 5.46.681.022/1307 transparent yellow: 5.46.681.022/1403 transparent green: 5.46.681.022/1510 RK 90 Keycap body plastic, for lenses 14 mm, 11/2-module Final size Punched size Technical data see page 4 - 111 Size Illuminability Dimension (a) behind front panel 11/2-module yes Lenses: RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, 14 14 14 14 14 14 14 14 14 mm, mm, mm, mm, mm, mm, mm, mm, mm, 17.20 x 24.20 mm 1.5-module, 1.5-module, 1.5-module, 1.5-module, 1.5-module, 1.5-module, 1.5-module, 1.5-module, 1.5-module, Dimension (b) in front of front panel Dimension (c) hole Order no. patterns final size 13.85 x 20.85 mm 14.00 x 21.00 mm 5.55.103.032/1013 opaque red: 5.46.681.003/0309 opaque yellow: 5.46.681.003/0409 opaque green: 5.46.681.003/0514 opaque blue: 5.46.681.003/0611 opaque light grey: 5.46.681.003/0700 transparent colorless: 5.46.681.023/1002 transparent red: 5.46.681.023/1307 transparent yellow: 5.46.681.023/1403 transparent green: 5.46.681.023/1510 4 RK 90 4-113 PCB KEY SWITCHES RK 90 - KEYCAPS, PLASTIC 14 MM RK 90 Keycap body plastic, for lenses 2-module Final size Punched size Technical data see page 4 - 111 Size Illuminability Dimension (a) behind front panel 2-module yes Lenses: RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, RK 90 - Lens, 4 RK 90 4-114 14 14 14 14 14 14 14 14 14 mm, mm, mm, mm, mm, mm, mm, mm, mm, 17.20 x 31.20 mm 2-module, 2-module, 2-module, 2-module, 2-module, 2-module, 2-module, 2-module, 2-module, Dimension (b) in front of front panel Dimension (c) hole Order no. patterns final size 13.85 x 27.85 mm 14.00 x 28.00 mm opaque red: 5.46.681.004/0309 opaque yellow: 5.46.681.004/0409 opaque green: 5.46.681.004/0514 opaque blue: 5.46.681.004/0611 opaque light grey: 5.46.681.004/0700 transparent colorless: 5.46.681.024/1002 transparent red: 5.46.681.024/1307 transparent yellow: 5.46.681.024/1403 transparent green: 5.46.681.024/1510 5.55.103.077/1013 PCB KEY SWITCHES RK 90 - KEYCAPS, ALUMINIUM, 14 MM RK 90 Keycaps, aluminum, 14 x 14 mm The RK 90 system design with metal keycaps is fairly safe against mechanical, thermal or chemical effects. Combined with a metal front panel, this data entry system offers maximum protection against vandalism. Tried and tested MICON 5, RACON 8/12 or RF 15/19 PCB key switches are used underneath the metal keycaps. The keycaps can be provided with engraved, colored anodized or laserprinted legends. This means that the legend is durable and cannot be removed by mechanical or chemical means. Technical Data General information Color of lens Size Degree of protection (with silicon seal) aluminum colorless anodized see order block IP65 (DIN EN 60529) Dimensions Dimension (b) in front of front panel Dimension (a) behind front panel Dimension (c) hole patterns final size Dimension hole patterns punched size see order block see order block see order block see order block Other specifications ROHS compliant REACH compliant yes yes a b 2.80 18.35 1.80 c 13.85 4 RK 90 4-115 PCB KEY SWITCHES RK 90 - KEYCAPS, ALUMINIUM, 14 MM RK 90 Keycaps, aluminum, 14 mm, 1-module Technical data see page 4 - 115 a b 2.80 c 18.35 Size Color of lens 13.85 1.80 Dimension (a) behind Dimension (b) in Dimension (c) hole Order no. front panel front of front panel patterns final size 1-module aluminum colorless anodized 18.35 x 18.35 mm 13.85 x 13.85 mm 14.00 x 14.00 mm 5.46.500.001/4010 RK 90 Keycaps, aluminum, 14 mm, 11/2-module Technical data see page 4 - 115 4 a b 2.80 18.35 Size Color of lens Dimension (a) behind Dimension (b) in Dimension (c) hole Order no. front panel front of front panel patterns final size 11/2-module aluminum colorless anodized 18.35 x 25.35 mm RK 90 4-116 c 13.85 1.80 13.85 x 20.85 mm 14.00 x 21.00 mm 5.46.500.003/4010 PCB KEY SWITCHES RK 90 - KEYCAPS, ALUMINIUM, 14 MM RK 90 Keycaps, aluminum, 14 mm, 2-module Technical data see page 4 - 115 a b 2.80 18.35 c 13.85 1.80 Size Color of lens Dimension (a) behind Dimension (b) in Dimension (c) hole Order no. front panel front of front panel patterns final size 2-module aluminum colorless anodized 18.35 x 32.35 mm 13.85 x 27.85 mm 14.00 x 28.00 mm 5.46.500.004/4010 4 RK 90 4-117 PCB KEY SWITCHES RK 90 - SPECIAL ACCESSORIES RK 90 Special accessories RK 90 Fin, to avoid inadvertent operation Mounting holes 4 Description Color Order no. RK 90 - Fin, to avoid inadvertent operation, light grey opaque light grey 5.55.103.079/0700 RK 90 - Fin, to avoid inadvertent operation, charcoal grey opaque light grey 5.55.103.079/0152 RK 90 4-118 PCB KEY SWITCHES RK 90 - SPECIAL ACCESSORIES RK 90 Spacer M 4 Length L Color Order no. 12.5 mm overall height for RF 15 mm - 5.30.764.040/0000 9.25 mm overall height, for RF 15 mm - 5.30.764.027/0000 5.5 mm overall height, for RF15 N mm - 5.30.764.010/0000 7.5 mm overall height for RACON 8/12 mm - 5.30.764.018/0000 4.25 mm overall height, for RACON 8/12 mm - 5.30.764.005/0000 Mounting from front (1 pc. per stud) RK 90 Silicone foil 4 Color Dimensions Order no. transparent 600 x 590 x 0.45 mm 7.16.102.006/0000 RK 90 4-119 PCB KEY SWITCHES RG 85 III - PUSHBUTTONS/KEYS RG 85 III Short-travel system Vandal-proof input system, ideally suited for elevator controls, info terminals, vending machines, etc. s Edge illumination and symbol illumination possible s Connection: Each module individually with an 8-pin Micro-Match socket connector s Modular fixing system with quick fasteners or single fixing s Contact arrangement: 1 NO contact s 35 V/250 mA max. s Degree of protection IP65 (keylock switch IP40). s Elevator standardm EN 81-70 s All products are RoHS compliant. 4 RG 85 III 4-121 PCB KEY SWITCHES RG 85 III - PUSHBUTTONS/KEYS Content RG 85 III - Key switches RG 85 III - Key switch, round design, without lens RG 85 III - Key switch, square design, without lens 4 - 125 4 - 126 4 - 126 RG 85 III - Keylock switches RG 85 III - Keylock switch, round design, without lens RG 85 III - Keylock switch, square design, without lens 4 - 128 4 - 129 4 - 129 RG 85 III - Signal indicators, without lens RG 85 III - Signal indicator, without lens 4 - 131 4 - 132 RG 85 III - Accessories RG 85 III - Lens for key switches, round RG 85 III - Lens for key switches, square RG 85 III - Lens for key switches, round flush, elevator standard EN 81-70 RG 85 III - Lens for key switches, round protruding, elevator standard EN 81-70 RG 85 III - Lens for key switches, square flush, elevator standard EN 81-70 RG 85 III - Lens for key switches, square protruding, elevator standard EN 81-70 RG 85 III - Lens for keylock switches, round RG 85 III - Lens for keylock switches, square RG 85 III - Lens, round, for signal indicators RG 85 III - Lens, square, for signal indicators RG 85 III - Lens, triangular, for signal indicators Cable, 8 wire, with socket connectors on both ends Fixing rail, length 490 mm Spacer Fixing piece for mounting the elements with the rail fixing method 4 - 133 4 - 133 4 - 134 4 - 135 4 - 136 4 - 137 4 - 138 4 - 139 4 - 139 4 - 140 4 - 140 4 - 141 4 - 141 4 - 142 4 - 142 4 - 142 4 RG 85 III 4-122 PCB KEY SWITCHES RG 85 III - PUSHBUTTONS/KEYS System Features Keylock Switch Features Perfectly suited for: elevator controls, info terminals, vending machines, etc. - Round or square design and lens shape - Edge illumination in one or two colours with 4 LED for each colour - Lens material: Aluminum or stainless steel with plastic inlays - Contact arrangement: 1 NO - Cylinder lock with pin tumblers - Two switching positions: 0 and 90 degrees, key can be removed in any position - Lock type 5201 - other lock types on request - Included: 2 keys - Vandal proof construction - Modular fixing system with quick fasteners or single fixing method using thread studs - Connection with keyed 8-pin micro-match connector - Degree of protection: IP40/65 Micro-Match Connector Pin Assignment 1/3 NO contact 2 O V - LED 4 Edge illuminat./signal indicator st 1 colour + 24 V DC +/- 20% 5 Symbol illumination + 24 V DC20% 6 Edge illuminat./signal indicator nd 2 colour + 24 V DC +/- 20% 7/8 NC contact 4 Pushbutton Features - Round or square design and lens shape - Edge illumination in one or two colours with 4 LED for each colour - Additional illumination of the symbol with 2 LED - Lens material: Aluminum or stainless steel with plastic inlays - Switching element: short-travel key switch RF 19 t /0DPOUBDU OPOJMMVNJOBUFE t /0DPOUBDU GVMMZJMMVNJOBUFE Signal Indicator Features - Lens shape round, square or triangular (arrow shape) - Lens material: Translucent plastic material - Fully illuminated with 5 LED RG 85 III 4-123 PCB KEY SWITCHES RG 85 III - PUSHBUTTONS/KEYS Installation plan Rail fixing method Single fixing method Grid 55.00 2.00 Distance threaded studs 55.00 0.10 12.08 Threaded studs M4 (min.) 14 mm Fixing element 5.41 032.173 4 Front panel RG 85 III 4-124 Grid 35.00 (27.50) Distance threaded studs 55.00 0.10 7.25 0.05 (27.50) Grid 55.00 Distance threaded studs 55.00 0.10 15.24 0.10 15.24 0.10 27.38 0.10 Grid 35.00 Fixing rail 5.41 032.173 Distance threaded studs 55.00 0.10 Threaded studs M4 x (min.) 20 mm Spacer 5.30 163.024 PCB KEY SWITCHES RG 85 III - PUSHBUTTONS/KEYS RG 85 III Key switches Technical Data Dimensions Length Mounting grid min. Width Mechanical design Version Mounting Terminals Contact arrangement Contact materials Symbol illumination Edge illumination see order block on U-rails or single mounting 8-pin Micro-Match(R) female connector snap-action (1 NO ) or bridge contact (1 NC + 1 NO ) see order block Ag see order block see order block Mechanical characteristics Operating force Operating travel Switching travel NO Switching travel NC 3.5 N 1 mm 1 mm 0.6 mm Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. Contact resistance when new max. Contact resistance acc. to life max. Bouncing time max. Operating voltage for LED Input current LED 3V 35 V 0.1 mA 250 mA 12.5 W 100 mE 3E 10 ms 2420% V per color/LED row 9 - 16 mA Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Operating life min. (operations) Degree of protection rail mounting Degree of protection single mounting Flammability of materials ROHS compliant REACH compliant -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 1,000,000 IP40 (DIN EN 60529) IP65 (DIN EN 60529) according to UL 94 HB yes yes Contact system 64 mm 55 x 35 mm 34 mm 4 Accessories RG 85 III - Key switch Description Photo Order no. Additional accessories see page Cable, 8 wires, with socket connectors on both ends, length 1 m 5.03.772.261/0000 4 - 141 RG 85 III - Lenses for key switches, round, stainless steel 5.04.914.000/2000 4 - 133 RG 85 III - Lenses for key switches, square, aluminum 5.04.915.100/2000 4 - 134 RG 85 III 4-125 PCB KEY SWITCHES RG 85 III - PUSHBUTTONS/KEYS RG 85 III Key switch, round design, without lens Technical data see page 4 - 125 Contact arrangement Edge illumination Symbol illumination Version Order no. 1 NO 4 LED white 2 LED yellow round 3.99.400.111/2400 1 NO 4 LED red 2 LED red round 3.99.400.111/3300 1 NO 4 LED yellow 2 LED green round 3.99.400.111/4500 1 NO 4 LED green 2 LED green round 3.99.400.111/5500 1 NO 4 LED blue 2 LED blue round 3.99.400.111/6600 1 NO 4 LED white, 4 LED blue 2 LED blue round 3.99.400.111/7600 1 NO 4 LED green, 4 LED red 2 LED red round 3.99.400.111/8300 Please order lenses (round shape) separately. 4 RG 85 III Key switch, square design, without lens Technical data see page 4 - 125 RG 85 III Contact arrangement Edge illumination Symbol illumination Version Order no. 1 NO 4 LED white 2 LED yellow square 3.99.400.112/2400 1 NO 4 LED red 2 LED red square 3.99.400.112/3300 1 NO 4 LED yellow 2 LED green square 3.99.400.112/4500 4-126 PCB KEY SWITCHES RG 85 III - PUSHBUTTONS/KEYS - Table (continued) - RG 85 III - Key switch, square design, without lens Contact arrangement Edge illumination Symbol illumination Version Order no. 1 NO 4 LED green 2 LED green square 3.99.400.112/5500 1 NO 4 LED blue 2 LED blue square 3.99.400.112/6600 1 NO 4 LED white, 4 LED blue 2 LED blue square 3.99.400.112/7600 1 NO 4 LED green, 4 LED red 2 LED red square 3.99.400.112/8300 Please order lenses (square shape) separately. 4 RG 85 III 4-127 PCB KEY SWITCHES RG 85 III - KEYLOCK SWITCHES RG 85 III Keylock switches Technical Data 4 Dimensions Length Mounting grid min. Width 64 mm 55 x 35 mm 34 mm (35 mm with sealing) Mechanical design Version Mounting Terminals Contact system Contact arrangement Contact materials Symbol illumination Edge illumination Lock Key removal position see order block on U-rails or single mounting 8-pin Micro-Match(R) female connector cross contact 1 NO Au alloy none see order block cylinder lock, lock type 5201 Pos. 0 + 1 Mechanical characteristics Rotating angle Switching travel NO 1 x 90 1 mm Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. Contact resistance when new max. Contact resistance acc. to life max. Bouncing time max. Operating voltage for LED Input current LED 3V 35 V 0.1 mA 100 mA 1W 100 mE 3E 10 ms 2420% V per color/LED row 9 - 16 mA Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Operating life min. (operations) Degree of protection rail mounting Degree of protection single mounting Flammability of materials ROHS compliant REACH compliant -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 50,000 IP40 (DIN EN 60529) IP65 (DIN EN 60529) according to UL 94 HB yes yes Accessories RG 85 III - Keylock switch RG 85 III Description Photo Order no. Additional accessories see page RG 85 III - Lenses for keylock switches, round, stainless steel 5.04.914.200/2000 4 - 139 RG 85 III - Lenses for keylock switches, square, aluminum 5.04.915.201/2000 4 - 139 4-128 PCB KEY SWITCHES RG 85 III - KEYLOCK SWITCHES RG 85 III Keylock switch, round design, without lens Technical data see page 4 - 128 Contact arrangement Edge illumination Rotating angle Version Order no. 1 NO 4 LED white 1 x 90 round 3.99.400.141/2000 1 NO 4 LED red 1 x 90 round 3.99.400.141/3000 1 NO 4 LED green 1 x 90 round 3.99.400.141/5000 1 NO 4 LED blue 1 x 90 round 3.99.400.141/6000 Please order lenses (round shape) separately. Accessoires: RG 85 III - Lenses for keylock switches, round, stainless steel: 5.04.914.200/2000 RG 85 III Keylock switch, square design, without lens 4 Technical data see page 4 - 128 Contact arrangement Edge illumination Rotating angle Version Order no. 1 NO 4 LED white 1 x 90 square 3.99.400.142/2000 1 NO 4 LED red 1 x 90 square 3.99.400.142/3000 1 NO 4 LED green 1 x 90 square 3.99.400.142/5000 1 NO 4 LED blue 1 x 90 square 3.99.400.142/6000 4-129 RG 85 III PCB KEY SWITCHES RG 85 III - KEYLOCK SWITCHES - Table (continued) - RG 85 III - Keylock switch, square design, without lens Please order lenses (square shape) separately. Accessoires: RG 85 III - Lenses for keylock switches, square, stainless steel: 5.04.914.201/2000 4 RG 85 III 4-130 PCB KEY SWITCHES RG 85 III - SIGNAL INDICATOR RG 85 III Signal indicators, without lens Technical Data Dimensions Length Mounting grid min. Width 64 mm 55 x 35 mm 34 mm Mechanical design Version Mounting Terminals Illumination according to lens on U-rails or single mounting 8-pin Micro-Match(R) female connector see order block Electrical characteristics Operating voltage for LED Input current LED V 24 depending on LED color 20 - 30 mA Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Degree of protection rail mounting Degree of protection single mounting Flammability of materials ROHS compliant REACH compliant -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 IP40 (DIN EN 60529) IP65 (DIN EN 60529) according to UL 94 HB yes yes 20% 4 Accessories RG 85 III - Signal indicator, without lens Description Photo Order no. Additional accessories see page Cable, 8 wires, with socket connectors on both ends, length 2 m 5.03.772.262/0000 4 - 141 RG 85 III - Lens, square, for signal indicators 5.04.903.009/0000 4 - 140 RG 85 III - Lens, round, for signal indicators 5.04.903.010/0000 4 - 140 RG 85 III - Lens, triangular, for signal indicators 5.04.903.011/0000 4 - 141 RG 85 III 4-131 PCB KEY SWITCHES RG 85 III - SIGNAL INDICATOR RG 85 III Signal indicator, without lens Technical data see page 4 - 131 Illumination Order no. 5 LED white 3.99.400.100/2000 5 LED red 3.99.400.100/3000 5 LED green 3.99.400.100/5000 5 LED green, 5 LED red 3.99.400.100/8000 Please order round, square or triangular lenses separately. 4 RG 85 III 4-132 PCB KEY SWITCHES RG 85 III - SPECIAL ACCESSORIES RG 85 III Accessories RG 85 III Lens for key switches, round 4 Version Form of lens Legending color Legending Order no. aluminum round - - 5.04.915.000/2000 stainless steel round - - 5.04.914.000/2000 The lenses without legending can not be engraved - other than the mentioned legends on request. RG 85 III 4-133 PCB KEY SWITCHES RG 85 III - SPECIAL ACCESSORIES RG 85 III Lens for key switches, square 4 RG 85 III Version Form of lens aluminum square - - 5.04.915.100/2000 stainless steel square - - 5.04.914.100/2000 stainless steel square opaque yellow symbol bell" 5.04.914.124/0400 stainless steel square opaque black 1 5.04.914.101/0100 stainless steel square opaque black 2 5.04.914.102/0100 stainless steel square opaque black 3 5.04.914.103/0100 stainless steel square opaque black 4 5.04.914.104/0100 stainless steel square opaque black 5 5.04.914.105/0100 stainless steel square opaque black 6 5.04.914.106/0100 stainless steel square opaque black U 5.04.914.121/0100 stainless steel square opaque black K 5.04.914.122/0100 stainless steel square opaque black E 5.04.914.123/0100 stainless steel square opaque black symbol open door" 5.04.914.125/0100 stainless steel square opaque black symbol close door" 5.04.914.126/0100 stainless steel square opaque black symbol ventilator" 5.04.914.127/0100 stainless steel square opaque black symbol arrow" 5.04.914.128/0100 stainless steel square translucent white 1 5.04.914.101/2000 stainless steel square translucent white 2 5.04.914.102/2000 stainless steel square translucent white 3 5.04.914.103/2000 stainless steel square translucent white 4 5.04.914.104/2000 stainless steel square translucent white 5 5.04.914.105/2000 stainless steel square translucent white 6 5.04.914.106/2000 stainless steel square translucent white U 5.04.914.121/2000 stainless steel square translucent white K 5.04.914.122/2000 stainless steel square translucent white E 5.04.914.123/2000 stainless steel square translucent white symbol open door" 5.04.914.125/2000 stainless steel square translucent white symbol close door" 5.04.914.126/2000 stainless steel square translucent white symbol ventilator" 5.04.914.127/2000 stainless steel square translucent white symbol arrow" 5.04.914.128/2000 4-134 Legending color Legending Order no. PCB KEY SWITCHES RG 85 III - SPECIAL ACCESSORIES - Table (continued) - RG 85 III - Lenses for key switches, square The lenses without legending can not be engraved - other than the mentioned legends on request. RG 85 III Lens for key switches, round flush, elevator standard EN 81-70 Version Form of lens Legending color Legending Order no. stainless steel round - stainless steel round opaque yellow symbol bell" 5.04.916.024/1404 stainless steel round translucent white 1 5.04.916.001/2000 stainless steel round translucent white 2 5.04.916.002/2000 stainless steel round translucent white 3 5.04.916.003/2000 stainless steel round translucent white 4 5.04.916.004/2000 stainless steel round translucent white 5 5.04.916.005/2000 stainless steel round translucent white 6 5.04.916.006/2000 stainless steel round translucent white U 5.04.916.021/2000 stainless steel round translucent white K 5.04.916.022/2000 stainless steel round translucent white E 5.04.916.023/2000 stainless steel round translucent white symbol open door" 5.04.916.025/2000 stainless steel round translucent white symbol close door" 5.04.916.026/2000 stainless steel round translucent white symbol arrow" 5.04.916.033/2000 stainless steel round translucent white symbol ventilator" 5.04.916.034/2000 stainless steel round translucent white 7 5.04.916.007/2000 stainless steel round translucent white 8 5.04.916.008/2000 stainless steel round translucent white 9 5.04.916.009/2000 stainless steel round translucent white 10 5.04.916.010/2000 stainless steel round translucent white 11 5.04.916.011/2000 stainless steel round translucent white 12 5.04.916.012/2000 stainless steel round translucent white 13 5.04.916.013/2000 stainless steel round translucent white 14 5.04.916.014/2000 stainless steel round translucent white 15 5.04.916.015/2000 - 5.04.916.000/2000 4-135 4 RG 85 III PCB KEY SWITCHES RG 85 III - SPECIAL ACCESSORIES - Table (continued) - RG 85 III - Lenses for key switches, round flush, elevator standard EN 81-70 Version Form of lens Legending color Legending Order no. stainless steel round translucent white 16 5.04.916.016/2000 stainless steel round translucent white 17 5.04.916.017/2000 stainless steel round translucent white 18 5.04.916.018/2000 stainless steel round translucent white 19 5.04.916.019/2000 stainless steel round translucent white 20 5.04.916.020/2000 stainless steel round translucent white 0 5.04.916.027/2000 stainless steel round translucent white -1 5.04.916.028/2000 stainless steel round translucent white -2 5.04.916.029/2000 stainless steel round translucent white -3 5.04.916.030/2000 stainless steel round translucent white -4 5.04.916.031/2000 stainless steel round translucent white -5 5.04.916.032/2000 stainless steel round transparent yellow symbol bell" 5.04.916.024/2214 RG 85 III Lens for key switches, round protruding, elevator standard EN 81-70 4 Version Form of lens Legending color Legending Order no. stainless steel round opaque yellow symbol bell" 5.04.916.224/1404 stainless steel round opaque black stainless steel round opaque black 2 5.04.916.202/1501 stainless steel round opaque black 3 5.04.916.203/1501 stainless steel round opaque black E 5.04.916.223/1501 stainless steel round opaque black 0 5.04.916.227/1501 stainless steel round opaque black -1 5.04.916.228/1501 stainless steel round transparent yellow symbol bell" 5.04.916.224/2214 RG 85 III 4-136 - 5.04.916.201/1501 PCB KEY SWITCHES RG 85 III - SPECIAL ACCESSORIES RG 85 III Lens for key switches, square flush, elevator standard EN 81-70 Version Form of lens Legending color Legending Order no. stainless steel square - stainless steel square opaque yellow symbol bell" 5.04.916.124/1404 stainless steel square translucent white 1 5.04.916.101/2000 stainless steel square translucent white 2 5.04.916.102/2000 stainless steel square translucent white 3 5.04.916.103/2000 stainless steel square translucent white 4 5.04.916.104/2000 stainless steel square translucent white 5 5.04.916.105/2000 stainless steel square translucent white 6 5.04.916.106/2000 stainless steel square translucent white U 5.04.916.121/2000 stainless steel square translucent white K 5.04.916.122/2000 stainless steel square translucent white E 5.04.916.123/2000 stainless steel square translucent white symbol open door" 5.04.916.125/2000 stainless steel square translucent white symbol close door" 5.04.916.126/2000 stainless steel square translucent white symbol arrow" 5.04.916.133/2000 stainless steel square translucent white symbol ventilator" 5.04.916.134/2000 stainless steel square translucent white 7 5.04.916.107/2000 stainless steel square translucent white 8 5.04.916.108/2000 stainless steel square translucent white 9 5.04.916.109/2000 stainless steel square translucent white 10 5.04.916.110/2000 stainless steel square translucent white 11 5.04.916.111/2000 stainless steel square translucent white 12 5.04.916.112/2000 stainless steel square translucent white 13 5.04.916.113/2000 stainless steel square translucent white 14 5.04.916.114/2000 stainless steel square translucent white 15 5.04.916.115/2000 stainless steel square translucent white 16 5.04.916.116/2000 stainless steel square translucent white 17 5.04.916.117/2000 stainless steel square translucent white 18 5.04.916.118/2000 stainless steel square translucent white 19 5.04.916.119/2000 stainless steel square translucent white 20 5.04.916.120/2000 - 5.04.916.100/2000 4-137 4 RG 85 III PCB KEY SWITCHES RG 85 III - SPECIAL ACCESSORIES - Table (continued) - RG 85 III - Lenses for key switches, square flush, elevator standard EN 81-70 Version Form of lens Legending color Legending Order no. stainless steel square translucent white 0 5.04.916.127/2000 stainless steel square translucent white -1 5.04.916.128/2000 stainless steel square translucent white -2 5.04.916.129/2000 stainless steel square translucent white -3 5.04.916.130/2000 stainless steel square translucent white -4 5.04.916.131/2000 stainless steel square translucent white -5 5.04.916.132/2000 stainless steel square transparent yellow symbol bell" 5.04.916.124/2214 RG 85 III Lens for key switches, square protruding, elevator standard EN 81-70 4 Version Form of lens Legending color Legending Order no. stainless steel square opaque yellow symbol bell" 5.04.916.254/1404 stainless steel square opaque black 1 5.04.916.231/1501 stainless steel square opaque black 2 5.04.916.232/1501 stainless steel square opaque black 3 5.04.916.233/1501 stainless steel square opaque black E 5.04.916.253/1501 stainless steel square opaque black 0 5.04.916.257/1501 stainless steel square opaque black -1 5.04.916.258/1501 stainless steel square transparent yellow symbol bell" 5.04.916.254/2214 RG 85 III 4-138 PCB KEY SWITCHES RG 85 III - SPECIAL ACCESSORIES RG 85 III Lens for keylock switches, round Version Form of lens Legending color Legending Order no. aluminum round - - 5.04.915.200/2000 stainless steel round - - 5.04.914.200/2000 RG 85 III Lens for keylock switches, square 4 Version Form of lens Legending color Legending Order no. aluminum square - - 5.04.915.201/2000 stainless steel square - - 5.04.914.201/2000 RG 85 III 4-139 PCB KEY SWITCHES RG 85 III - SPECIAL ACCESSORIES RG 85 III Lens, round, for signal indicators Version Form of lens plastic translucent round Legending color Legending - Order no. - 5.04.903.010/0000 RG 85 III Lens, square, for signal indicators 4 Version Form of lens plastic translucent square RG 85 III 4-140 Legending color - Legending Order no. - 5.04.903.009/0000 PCB KEY SWITCHES RG 85 III - SPECIAL ACCESSORIES RG 85 III Lens, triangular, for signal indicators Version Form of lens plastic translucent triangular Legending color - Legending Order no. - 5.04.903.011/0000 Cable, 8 wire, with socket connectors on both ends 4 Version Order no. length: 1 m 5.03.772.261/0000 length: 2 m 5.03.772.262/0000 RG 85 III 4-141 PCB KEY SWITCHES RG 85 III - SPECIAL ACCESSORIES Fixing rail, length 490 mm Version Order no. length: 490 mm 5.41.032.173/7500 Spacer Version Order no. mounting on rails 5.30.163.021/6000 single mounting 5.30.163.024/6000 4 Fixing piece for mounting the elements with the rail fixing method Description Order no. Fixing piece for mounting the elements with the rail fixing method 5.55.104.208/0459 RG 85 III 4-142 PCB KEY SWITCHES RS 76 M - FULL-TRAVEL KEY SWITCHES RS 76 Full-travel key switches The RS 76 full-travel key switches are designed for configuring keyboards. They offer very comfortable operation with an overall height of 15.5 / 15.9 mm and a key travel of 4 mm. The modular system with a grid of 3/4" = 19.05 mm enables you to design any key block you may want. Mechanical contact system RS 76 M A gold alloy is used as the contact material and provides high contact reliability, low contact resistance and short bouncing time. Solid-state contact system RS 76 C The solid-state switch in Hall-IC technology ensures bounce-free and wearfree switching and a long operating life. Function: When pressing the keys, a permanent magnet changes its position relative to the Hall-IC and thereby generates an output signal. Their use is especially recommended in hostile environments and for heavy duty applications. s All products are RoHS compliant. 4 RS 76 4-143 PCB KEY SWITCHES RS 76 M - FULL-TRAVEL KEY SWITCHES Content RS 76 M - Full-travel key switches, not illuminable RS 76 M - Full-travel key switch, not illuminable RS 76 M - Full-travel key switch, with diode, not illuminable 4 - 150 4 - 151 4 - 152 RS 76 M - Full-travel key switches, illuminable RS 76 M - Full-travel key switch, illuminable, momentary RS 76 M - Full-travel key switch, illuminable, latching RS 76 MX - Full-travel key switch, fully illuminable 4 - 153 4 - 154 4 - 155 4 - 155 RS 76 C - Full-travel key switches, not illuminable RS 76 C - Full-travel key switch, not illuminable 4 - 156 4 - 157 RS 76 C - Full-travel key switches, illuminable RS 76 C - Full-travel key switch, illuminable, momentary RS 76 C - Full-travel key switch, illuminable, latching 4 - 158 4 - 159 4 - 160 RS 76 - Keycaps, not illuminable RS 76 C - Keycap, opaque RS 76 C - Keycap, opaque, with nail protection RS 76 C - Keycap with legend insert 4 - 161 4 - 161 4 - 162 4 - 162 RS 76 - Keycaps, illuminable RS 76 - Keycap with light bar RS 76 - Keycap, illuminable, with legend insert RS 76 - Keycap, illuminable, with nail protection and legend insert RS 76 - Keycap, illuminable, with legend insert RS 76 MX - Keycap, fully illuminable 4 - 163 4 - 163 4 - 164 4 - 164 4 - 165 4 - 165 RS 76 - Keycaps, with legend, two-shot molded/keycap sets RS 76 - Keycap set, symbols A-Z RS 76 - Keycap set, symbols 0-9 4 - 166 4 - 166 4 - 167 RS 76 - Accessories RS 76 - Cover IP40 4 - 168 4 - 168 4 RS 76 4-144 PCB KEY SWITCHES RS 76 MC - FULL-TRAVEL KEY SWITCHES The RAFI full-travel key switches RS 76 are modular systems for designing individual key blocks and keyboards in the 3/4 inch (= 19.05 mm) grid. Definitions Momentary key switches Momentary key switches return to their initial position after being pressed (momentary action). Latching key switches Latching key switches lock when actuated and are returned to their initial position when pressed again (push-push action). Keycap, n-module A 2-module keycap f. ex. has the twofold length of a 1-module keycap. Contact principle There are two contact principles: - Mechanical (M): Cross contact (RS 76 M) Bridge contact (RS 76 M, illuminated) - Contactless (C): Based on Hall-IC (RS 76 C) Manual Soldering The soldering temperature should not exceed 300 C and the soldering time should be less than 5 seconds. Keycap materials Keycap without legend insert: ABS Keycap with legend insert: - Keycap body: ABS - Lens: PC Legending of keycaps Keycaps can be legended by different methods: Two-shot moulding Using this method the symbol is separately manufactured from a plastic and then the appropriate keycap form is moulded round it. Advantage: The character becomes a integrated part of the keycap, thus eliminating abrasion. All RAFI keycap sets with standard legending are manufatured by this method. Customer specific two-shot moulded keycaps on request. Printing Keycaps can be printed with a two-component ink on request. The abrasin of this kind of legending is high. This method of legending is suitable for average volumes. Engraving In this labour intensive process the keycaps are engraved with the required symbol, then inlaid with ink. Only used for small volumes. Laser-printing This method of legending can be recommended when complete keyboards are required in different keyboard layouts for which RAFI will develop the respective software. The keyboards can then be legended within a short time. This method of legending ist particularly recommended for average to large volumes. 4 Legend inserts In the case of keycaps with replaceable legend inserts it is possible to print or engrave the legend inserts. As these insets are protected by the lens, there can be no abrasion here either. RS 76 4-145 PCB KEY SWITCHES RS 76 M/C - FULL-TRAVEL KEY SWITCHES Design No. Description 4 1.1 Key switch RS 76 C 1.2 Key switch RS 76 C with LED 1.3 Key switch RS 76 M 1.4 Key switch R 76 M with LED 2 Keycap, 1- resp. multi-module 3 Keycap with nail protection, 1- resp. multi-module 5 Keycap, illuminated 6 Keycap, illuminated 7 Keycap, illuminated 9.1 LED RS 76 4-146 9.2 10.1 10.2 10.3 10.4 11 Spacer for LED (for RS 76 C only) Plunger for mult-moduel keycaps* Sleeve for multi-moduel keycaps* Metal lever for multi-module keycaps* Bearing bracket for multi-module keycaps* Covers * These parts are included as a complete packet in the delivery of keycaps 2-module. PCB KEY SWITCHES RS 76 M/C - FULL-TRAVEL KEY SWITCHES Hole pattern PCB RS 76 M/C The hole patterns apply to the horizontal position of the keycaps only. Should they be in a vertical position, the momentary key switch must be mounted accordingly, i. e. rotated by 90. For 1 - 13/4-module keycaps (view on component side) Momentary key switch, non-illuminated Momentary key switch, non-illuminated RS 76 M RS 76 C For 2-, 3- and 8-module keycaps (view on component side) Momentary key switch, non-illuminated s HOLES FOR BEARING BRACKET DIAM .O THROUGH PLATING Keycap 4 (OLE DIAM .OR THROUGH PLATING RS 76 M/C L1 mm Metal bow touches the surface of PCB, in this area no conductor tracks on component side L2 mm 2-module 25.40 22.86 3-module 30.48 24.13 5-module 68.58 68.58 Important note: In the case of 2-, 3- and 8-module keycaps, additional holes must be provided for the accessories. In the case of keycaps < 2-module, neither accessories nor holes are required. 4-147 RS 76 PCB KEY SWITCHES RS 76 M/C - FULL-TRAVEL KEY SWITCHES Specific technical data RS 76 C Output pulse diagram Dynamic characteristics (max.) Tw = 25 C Tw = 50 C Tw = 70 C Turn-on delay time tPHL 3 s 7 s 10 s Turn-off delay time tPHL 4 s 5 s 6 s Fall/rise time tPHL 2 s 2,5 s 3 s tPHL 1 s 1,5 s 2,5 s 4 "LOCK DIAGRAM Hall IC Static with Enable Input RS 76 4-148 PCB KEY SWITCHES RS 76 M/C - FULL-TRAVEL KEY SWITCHES Examples for application RS 76 C Driving of logic components Indication of logical states Driving of a PNP transistor Use as static key with open collector output. Output transistor (NPN) is conductive when actuated. 4 Use in keyboards RS 76 4-149 PCB KEY SWITCHES RS 76 M - FULL-TRAVEL KEY SWITCHES, NON-ILLUMINATED RS 76 M Full-travel key switches, not illuminable Technical Data 4 General information Recommended key grid 19.05 mm Mechanical design Contact function Mounting Terminals Contact system Contact arrangement Contact materials Illumination momentary soldering solder terminals, tin-plated cross contact 1 NO Au alloy no Mechanical characteristics Operating force max. Operating travel Switching travel Robustness max. see order block 4 mm 1.5 - 2.8 mm 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. Bouncing time max. 2 V (with Diode 3 V) 35 V 0.01 mA 100 mA 1W 100 mE (ohne Diode) 3 E (without diode) 109 E 8 kV 5 ms Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. (product) Storage temperature max. (rail) Environmental restistance Operating life min. (operations) Degree of protection Flammability of materials ROHS compliant REACH compliant -25 C +70 C -40 C +80 C +50 C acc. to IEC 60068-2-14, -30, -33 and -78 107 IP40 (DIN EN 60529) UL 94 HB yes yes Accessories RS 76 M - Full-travel key switch, not illuminable RS 76 Description Photo Order no. Additional accessories see page RS 76 C - Keycap with legend insert - 4 - 162 RS 76 C - Keycap, opaque - 4 - 161 4-150 PCB KEY SWITCHES RS 76 M - FULL-TRAVEL KEY SWITCHES, NON-ILLUMINATED - Table (continued) - Accessories RS 76 M - Full-travel key switch, not illuminable Description Photo Order no. RS 76 C - Keycap, opaque, with nail protection Additional accessories see page - 4 - 162 RS 76 M Full-travel key switch, not illuminable Technical data see page 4 - 150 Contact function Illumination Contact arrangement Contact materials Operating travel Operating force max. Order no. momentary no 1 NO Au alloy 4 mm 0.9 N 3.13.002.502/0000 momentary no 1 NO Au alloy 4 mm 1.4 N 3.13.002.512/0000 4 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. RS 76 4-151 PCB KEY SWITCHES RS 76 M - FULL-TRAVEL KEY SWITCHES, NON-ILLUMINATED RS 76 M Full-travel key switch, with diode, not illuminable Technical data see page 4 - 150 Contact function Illumination Contact arrangement Contact materials Operating travel Operating force max. Order no. momentary no 1 NO Au alloy 4 mm 0.9 N 3.13.005.001/0000 momentary no 1 NO Au alloy 4 mm 1.4 N 3.13.005.011/0000 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. 4 RS 76 4-152 PCB KEY SWITCHES RS 76 M - FULL-TRAVEL KEY SWITCHES, ILLUMINATED RS 76 M Full-travel key switches, illuminable Technical Data General information Recommended key grid 19.05 mm Mechanical design Contact function Mounting Terminals Contact system Contact arrangement Contact materials Illumination see order block soldering solder terminals, tin-plated bridge contact 1 NO Au alloy see order block Mechanical characteristics Operating force max. Operating travel Switching travel Robustness max. 1N 4 mm 1.5 - 2.8 mm 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. Bouncing time max. 2V 35 V 0.01 mA 100 mA 1W 200 mE 3E 109 E 8 kV 10 ms Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. (product) Storage temperature max. (rail) Environmental restistance Operating life min. (operations) Degree of protection Flammability of materials ROHS compliant REACH compliant -25 C +70 C -40 C +80 C +50 C acc. to IEC 60068-2-14, -30, -33 and -78 107 momentary, 105 latching IP40 (DIN EN 60529) UL 94 HB yes yes RS 76MX, with illuminated keycaps 4 Accessories RS 76 M - Full-travel key switch, illuminable Description Photo Order no. Additional accessories see page RS 76 - Cover IP40 - 4 - 168 RS 76 - Keycap with light bar - 4 - 163 RS 76 - Keycap, illuminable, with legend insert - 4 - 164 RS 76 4-153 PCB KEY SWITCHES RS 76 M - FULL-TRAVEL KEY SWITCHES, ILLUMINATED - Table (continued) - Accessories RS 76 M - Full-travel key switch, illuminable Description Photo Order no. RS 76 - Keycap, illuminable, with nail protection and legend insert Additional accessories see page - 4 - 164 RS 76 M Full-travel key switch, illuminable, momentary Technical data see page 4 - 153 4 Contact function Contact system Illumination Recommended key grid Order no. momentary bridge contact spot illumination possible with 3 LED 19.05 mm 3.13.002.102/0000 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. Accessoires: THT LED 3 mm, without base: see page 2 - 263, 5 - 8 RS 76 4-154 PCB KEY SWITCHES RS 76 M - FULL-TRAVEL KEY SWITCHES, ILLUMINATED RS 76 M Full-travel key switch, illuminable, latching Technical data see page 4 - 153 Contact function Contact system Illumination Recommended key grid Order no. latching bridge contact spot illumination possible with 3 LED 19.05 mm 3.13.002.022/0000 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. Accessoires: THT LED 3 mm, without base: see page 2 - 263, 5 - 8 RS 76 MX Full-travel key switch, fully illuminable 4 Technical data see page 4 - 153 Contact function Contact system Illumination Recommended key grid Order no. momentary bridge contact 2 SMT LED needed 19.05 mm 3.13.002.922/0000 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. The SMT LEDs are soldered on the back of the printed circuit board and shine through openings in the board and key switch housing. Accessoires: RS 76 MX - Keycap, fully illuminated: 5.05.511.168/0209 RS 76 MX - Keycap, fully illuminated: 5.05.511.168/0754 RS 76 4-155 PCB KEY SWITCHES RS 76 C - FULL-TRAVEL KEY SWITCHES, NON-ILLUMINATED RS 76 C Full-travel key switches, not illuminable Technical Data 4 RS 76 4-156 General information Recommended key grid 19.05 mm Mechanical design Contact function Mounting Terminals Contact system Illumination momentary soldering solder terminals, tin-plated contactless with Hall-IC no Mechanical characteristics Switching travel off Operating force max. Operating travel Switching travel on Robustness max. 0.8 ... 2.4 mm see order block 4 mm 1.5 - 2.8 mm 100 N Electrical characteristics Operating voltage DC Supply current max. at UIL = 0 V Supply current max. at UIH = 5 V Input voltage (F) at UIL = 0 V Input voltage (F) at UIH = 2.4V Output load current (Q) max. Output residual current (Q) max. Output saturation voltage (Q) max. bei 16 mA ESD strength max. Output switching times (Q) at 25 C, tPHL Output switching times (Q) at 25 C, tPLH Output switching times (Q) at 25 C, tTHL Output switching times (Q) at 25 C, tTLH 8 kV 3 s 4 s 1 s 2 s Other specifications Reliability of Hall-IC at 25 C Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. (product) Storage temperature max. (rail) Environmental restistance Operating life min. (operations) Degree of protection Flammability of materials ROHS compliant REACH compliant = 2.5 x 10 h 0 C +70 C -40 C +80 C +50 C acc. to IEC 60068-2-14, -30, -33 and -78 see order block IP40 (DIN EN 60529) UL 94 HB yes yes 4.75 ... 5.25 V 0.5 mA 5 mA 0.4 V 5.25 V 16 mA 10 A 0.4 V -7 -1 PCB KEY SWITCHES RS 76 C - FULL-TRAVEL KEY SWITCHES, NON-ILLUMINATED Accessories RS 76 C - Full-travel key switch, not illuminable Description Photo Order no. Additional accessories see page RS 76 C - Keycap with legend insert - 4 - 162 RS 76 C - Keycap, opaque - 4 - 161 RS 76 C - Keycap, opaque, with nail protection - 4 - 162 RS 76 C Full-travel key switch, not illuminable Technical data see page 4 - 156 Contact function Operating life min. (operations) Illumination Operating force max. Operating travel Order no. momentary 108 no 0.7 N 4 mm 3.13.001.010/0000 momentary 8 no 1N 4 mm 3.13.001.210/0000 10 4 For accessories and keycaps, refer to RS 76. For applications, refer to the general description of RS 76. RS 76 4-157 PCB KEY SWITCHES RS 76 C - FULL-TRAVEL KEY SWITCHES, ILLUMINATED RS 76 C Full-travel key switches, illuminable Technical Data 4 General information Recommended key grid 19.05 mm Mechanical design Contact function Mounting Terminals Contact system Illumination LED color see order block soldering solder terminals, tin-plated contactless with Hall-IC with LED see order block Mechanical characteristics Switching travel on Switching travel off Operating force max. Operating travel Robustness max. 1.5 - 2.8 mm 0.8 ... 2.4 mm 0.7 N 4 mm 100 N Electrical characteristics Number of LED Operating voltage DC Supply current max. at UIL = 0 V Supply current max. at UIH = 5 V Input voltage (F) at UIL = 0 V Input voltage (F) at UIH = 2.4V Output load current (Q) max. Output residual current (Q) max. Output saturation voltage (Q) max. bei 16 mA ESD strength max. Output switching times (Q) at 25 C, tPHL Output switching times (Q) at 25 C, tPLH Output switching times (Q) at 25 C, tTHL Output switching times (Q) at 25 C, tTLH 8 kV 3 s 4 s 1 s 2 s Other specifications Reliability of Hall-IC at 25 C Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. (product) Storage temperature max. (rail) Environmental restistance Operating life min. (operations) Degree of protection Flammability of materials ROHS compliant REACH compliant = 2.5 x 10 h 0 C +70 C -40 C +80 C +50 C acc. to IEC 60068-2-14, -30, -33 and -78 see order block IP40 (DIN EN 60529) UL 94 HB yes yes see order block 4.75 ... 5.25 V 0.5 mA 5 mA 0.4 V 5.25 V 16 mA 10 A 0.4 V -7 -1 Accessories RS 76 C - Full-travel key switch, illuminable RS 76 Description RS 76 - Cover IP40 4-158 Photo Order no. Additional accessories see page - 4 - 168 PCB KEY SWITCHES RS 76 C - FULL-TRAVEL KEY SWITCHES, ILLUMINATED - Table (continued) - Accessories RS 76 C - Full-travel key switch, illuminable Description Photo Order no. Additional accessories see page RS 76 - Keycap with light bar - 4 - 163 RS 76 - Keycap, illuminable, with legend insert - 4 - 164 RS 76 - Keycap, illuminable, with nail protection and legend insert - 4 - 164 RS 76 C Full-travel key switch, illuminable, momentary Technical data see page 4 - 158 Contact function Operating life min. (operations) Illumination momentary 108 with LED Operating force max. Operating travel Order no. 0.7 N 3.13.001.110/0000 4 mm 4 RS 76 4-159 PCB KEY SWITCHES RS 76 C - FULL-TRAVEL KEY SWITCHES, ILLUMINATED RS 76 C Full-travel key switch, illuminable, latching Technical data see page 4 - 158 Contact function Operating life min. (operations) Illumination latching 4 RS 76 4-160 105 with LED Operating force max. Operating travel Order no. 0.7 N 3.13.001.130/0000 4 mm PCB KEY SWITCHES RS 76 - KEYCAPS, NON-ILLUMINATED RS 76 Keycaps, not illuminable Technical Data General information Form of lens Color of keycap / legending Color of lens / legend insert Illumination Degree of protection Size of keycap see order block see order block see order block see order block see order block see order block Other specifications ROHS compliant REACH compliant yes yes RS 76 C Keycap, opaque Technical data see page 4 - 161 4 Keycap, light grey Size of keycap Illumination Color of keycap / legending Color of lens / legend insert Order no. 1-module no charcoal grey/- - 5.82.000.000/0152 1-module no light grey/- - 5.82.000.000/0242 Keycap sets available in two-shot molded design. Other keycap sizes, e.g. 1.25-, 1.5-, 1.75-, 2-, 3-, 5- and 8-module versions available on request. RS 76 4-161 PCB KEY SWITCHES RS 76 - KEYCAPS, NON-ILLUMINATED RS 76 C Keycap, opaque, with nail protection Technical data see page 4 - 161 opaque with nail protection charcoal grey / white Size of keycap Illumination Color of keycap / legending Color of lens / legend insert Order no. 1-module no charcoal grey/- - 5.80.000.000/0152 1-module no light grey/- - 5.80.000.000/0242 Keycap sets available in two-shot molded design. Other keycap sizes, e.g. 1.25-, 1.5-, 1.75-, 2-, 3- and 8-module versions available on request. RS 76 C Keycap with legend insert Technical data see page 4 - 161 4 Size of keycap Illumination Color of keycap / legending Color of lens / legend insert Order no. 1-module no charcoal grey/- colorless/white 5.04.665.221/5520 1-module no light grey/- colorless/white 5.04.665.230/5520 Supplied as single parts: Mat lens, legend insert, keycap body. Other colors on request. RS 76 4-162 PCB KEY SWITCHES RS 76 - KEYCAPS, ILLUMINATED RS 76 Keycaps, illuminable Technical Data General information Form of lens Color of keycap / legending Color of lens / legend insert Illumination Degree of protection Size of keycap see order block see order block see order block see order block see order block see order block Other specifications ROHS compliant REACH compliant yes yes RS 76 Keycap with light bar Technical data see page 4 - 163 4 Size of keycap Illumination Color of keycap / legending Color of lens / legend insert Order no. 1-module yes light grey/- - 5.82.110.000/0242 1-module yes charcoal grey/- - 5.82.110.000/0152 Other colors on request. RS 76 4-163 PCB KEY SWITCHES RS 76 - KEYCAPS, ILLUMINATED RS 76 Keycap, illuminable, with legend insert Technical data see page 4 - 163 Size of keycap Illumination Color of keycap / legending Color of lens / legend insert Order no. 1-module yes charcoal grey/- colorless/white 5.04.665.521/5520 1-module yes light grey/- colorless/white 5.04.665.530/5520 Supplied as single parts: Mat lens, legend insert, diffuser foil, keycap body. Other colors on request. RS 76 Keycap, illuminable, with nail protection and legend insert Technical data see page 4 - 163 4 Size of keycap Illumination Color of keycap / legending Color of lens / legend insert Order no. 1-module yes charcoal grey/- colorless/white 5.04.665.911/5520 1-module yes light grey/- colorless/white 5.04.665.920/5520 Supplied as single parts: Mat lens, legend insert, keycap body. Other colors on request. RS 76 4-164 PCB KEY SWITCHES RS 76 - KEYCAPS, ILLUMINATED RS 76 Keycap, illuminable, with legend insert Technical data see page 4 - 163 Size of keycap Illumination Color of keycap / legending Color of lens / legend insert Order no. 1-module yes charcoal grey/- colorless/white 5.04.665.161/5520 1-module yes light grey/- colorless/white 5.04.665.170/5520 Supplied as single parts: Mat lens, legend insert, diffuser foil, keycap body. Other colors on request. RS 76 MX Keycap, fully illuminable Technical data see page 4 - 163 4 RS 76MX, with illuminated keycaps Size of keycap Illumination Color of keycap / legending Color of lens / legend insert Order no. 1-module yes white/- white translucent/- 5.05.511.168/0209 1-module yes light grey/- white translucent/- 5.05.511.168/0754 11/4-module yes white/- white translucent/- 5.05.511.169/0209 11/2-module yes white/- white translucent/- 5.05.511.170/0209 13/4-module yes white/- white translucent/- 5.05.511.171/0209 11/4-module with light conductor yes white/- white translucent/- 5.05.511.173/0209 Laser-printed versions available on request. RS 76 4-165 PCB KEY SWITCHES RS 76 - KEYCAPS, WITH LEGEND, TWO-SHOT MOLDED/KEYCAP SETS RS 76 Keycaps, with legend, two-shot molded/ keycap sets Technical Data General information Form of lens Color of keycap / legending Symbol Illumination Degree of protection Size of keycap see order block see order block see order block see order block see order block see order block Other specifications ROHS compliant REACH compliant yes yes Mouse button, 2 x PS/2 connector RS 76 Keycap set, symbols A-Z 4 Technical data see page 4 - 166 light beige Size of keycap Form of lens Color of keycap / legending Symbol Order no. 1-module keycap opaque with nail protection charcoal grey/white A-Z 5.00.999.500/0000 1-module keycap opaque with nail protection light grey/black A-Z 5.00.999.824/0000 1-module keycap opaque charcoal grey/white A-Z 5.00.999.525/0000 1-module keycap opaque light grey/black A-Z 5.00.999.825/0000 Other symbols and colors on request. RS 76 4-166 PCB KEY SWITCHES RS 76 - KEYCAPS, WITH LEGEND, TWO-SHOT MOLDED/KEYCAP SETS RS 76 Keycap set, symbols 0-9 Technical data see page 4 - 166 opaque with nail protection charcoal grey / white Size of keycap Form of lens Color of keycap / legending Symbol Order no. 1-module keycap opaque with nail protection charcoal grey/white 0-9 5.00.999.504/0000 1-module keycap opaque with nail protection light grey/black 0-9 5.00.999.826/0000 1-module keycap opaque charcoal grey/white 0-9 5.00.999.529/0000 1-module keycap opaque light grey/black 0-9 5.00.999.827/0000 Other symbols and colors on request. 4 RS 76 4-167 PCB KEY SWITCHES RS 76 - SPECIAL ACCESSORIES RS 76 Accessories Technical Data General information Color Size see order block see order block Other specifications ROHS compliant REACH compliant yes yes RS 76 Cover IP40 Technical data see page 4 - 168 4 Color Size Order no. charcoal grey 1/4-module 5.04.520.171/0152 light grey 1/4-module 5.04.520.171/0242 light beige 1/4-module 5.04.520.171/0710 dark grey 1/4-module 5.04.520.171/0801 charcoal grey 1/2-module 5.04.520.172/0152 light grey 1/2-module 5.04.520.172/0242 light beige 1/2-module 5.04.520.172/0710 dark grey 1/2-module 5.04.520.172/0801 charcoal grey 3/4-module 5.04.520.173/0152 light grey 3/4-module 5.04.520.173/0242 light beige 3/4-module 5.04.520.173/0710 dark grey 3/4-module 5.04.520.173/0801 charcoal grey 1-module 5.04.520.174/0152 RS 76 4-168 PCB KEY SWITCHES RS 76 - SPECIAL ACCESSORIES - Table (continued) - RS 76 - Cover IP40 Color Size Order no. light grey 1-module 5.04.520.174/0242 light beige 1-module 5.04.520.174/0710 dark grey 1-module 5.04.520.174/0801 Other colors on request. 4 RS 76 4-169 PCB KEY SWITCHES MICROMEC - KEYLOCK SWITCHES Keylock / rotary switches for PCB 4 Keylock switches for PCB mounting. Matching with the RS 76 full-travel key switches and the RF 15 and RF 19 tactile switches. s All products are RoHS compliant. Key Switches 4-171 PCB KEY SWITCHES MICROMEC - KEYLOCK SWITCHES Content MICROMEC - Keylock switches, IP54 MICROMEC - Keylock switch IP54 4 - 173 4 - 176 EUROLOCKS - Keylock switches, IP54 EUROLOCKS - Keylock switch IP54 4 - 177 4 - 178 Priority keylock switches, IP54 Priority keylock switch IP54 4 - 179 4 - 180 Rotary switches, IP40 Rotary switch IP40 4 - 181 4 - 182 4 Key Switches 4-172 PCB KEY SWITCHES MICROMEC - KEYLOCK SWITCHES IP 54 MICROMEC Keylock switches, IP54 Technical Data General information Color Form of collar see order block square Dimensions Length of collar Width of collar Overall height 19 mm 19 mm 19.5 mm Mechanical design Mounting Terminals Contact system Contact function Contact materials Illuminability Lock Wafers Lock type Number of locking positions Main key Key removal position soldering tin-plated cross contact self cleaning see order block Au alloy no Micromec 5 001 500 on request see order block Mechanical characteristics Switching torque Robustness max. Dielectric strength AC min. Rated power max. 0.04 ... 0.10 Nm 2 Nm 500 V 1W Electrical characteristics Rated voltage Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. 2 ... 35 V 100 mA 100 mE 200 mE 109 E 8 kV Other specifications Rotating angle Operating life Degree of protection from front side Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Flammability of materials ROHS compliant REACH compliant see order block 10,000 IP54 -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 UL 94 HB yes yes 4 Accessories MICROMEC - Keylock switch IP54 Description O-ring for keylock switch Photo Order no. 5.30.120.015/0100 Additional accessories see page 5 - 31 Key Switches 4-173 PCB KEY SWITCHES MICROMEC - KEYLOCK SWITCHES IP 54 - Table (continued) - Accessories MICROMEC - Keylock switch IP54 Description Photo Order no. Additional accessories see page Spare key, (delivery content 1 key) 5.58.007.001/0000 - Spare key, for double action, e.g. 2 x 90 (delivery content 1 key) 5.58.008.001/0000 - Spare key for 3 angles, f.ex. 3 x 90 degree (content 1 key) 5.58.009.001/0100 - Spare key for 4 angles, f.ex. 4 x 90 degrees, (content 1 key) 5.58.010.001/0100 - 4 Key Switches 4-174 PCB KEY SWITCHES MICROMEC - KEYLOCK SWITCHES IP 54 Dimensional drawing Circuit diagram Hole patterns PCB View on component side Switching position Contact function 0 1 4 2 3 Key Switches 4-175 PCB KEY SWITCHES MICROMEC - KEYLOCK SWITCHES IP 54 MICROMEC Keylock switch IP54 Technical data see page 4 - 173 PCB hole pattern, component side 4 Contact function Color Rotating angle Key removal position Order no. momentary charcoal grey 1 x 40 0 3.13.026.041/0000 momentary light grey 1 x 40 0 3.13.026.541/0000 latching charcoal grey 1 x 90 0 3.13.026.001/0000 latching light grey 1 x 90 0 3.13.026.501/0000 latching charcoal grey 1 x 90 0+1 3.13.026.006/0000 latching light grey 1 x 90 0+1 3.13.026.506/0000 latching charcoal grey 3 x 90 0 3.13.026.021/0000 latching light grey 3 x 90 0 3.13.026.521/0000 latching charcoal grey 3 x 90 0+1+2+3 3.13.026.026/0000 latching light grey 3 x 90 0+1+2+3 3.13.026.526/0000 latching charcoal grey 4 x 90 without stop 0 3.13.026.031/0000 latching light grey 4 x 90 without stop 0 3.13.026.531/0000 latching charcoal grey 4 x 90 without stop 0+1+2+3 3.13.026.036/0000 latching light grey 4 x 90 without stop 0+1+2+3 3.13.026.536/0000 latching charcoal grey 2 x 90 0 3.13.026.011/0000 latching light grey 2 x 90 0 3.13.026.511/0000 latching charcoal grey 2 x 90 0+1+2 3.13.026.016/0000 latching light grey 2 x 90 0+1+2 3.13.026.516/0000 latching charcoal grey 2 x 90 0 3.13.026.601/0000 latching light grey 2 x 90 0 3.13.026.851/0000 latching charcoal grey 2 x 90 0+1+3 3.13.026.606/0000 latching light grey 2 x 90 0+1+3 3.13.026.856/0000 2 keys included. Other lock variants available on request. Key Switches 4-176 PCB KEY SWITCHES EUROLOCKS - KEYLOCK SWITCHES IP 54 EUROLOCKS Keylock switches, IP54 Technical Data General information Color Form of collar see order block square Dimensions Length of collar Width of collar Overall height 19 mm 19 mm 19.5 mm Mechanical design Mounting Terminals Contact system Contact function Contact materials Illuminability Lock Wafers Lock type Number of locking positions Main key Symmetric key Key removal position soldering tin-plated cross contact self cleaning latching Au alloy no Eurolocks 5 801 50 no yes see order block Mechanical characteristics Switching torque Robustness max. Dielectric strength AC min. Rated power max. 0.04 ... 0.10 Nm 2 Nm 500 V 1W Electrical characteristics Rated voltage Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. 2 ... 35 V 100 mA 100 mE 200 mE 109 E 8 kV Other specifications Rotating angle Operating life Degree of protection from front side Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Flammability of materials ROHS compliant REACH compliant see order block 10,000 IP54 -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 UL 94 HB yes yes 4 PCB hole pattern, component side Accessories EUROLOCKS - Keylock switch IP54 Description O-ring for keylock switch Photo Order no. 5.30.120.015/0100 Additional accessories see page 5 - 31 Key Switches 4-177 PCB KEY SWITCHES EUROLOCKS - KEYLOCK SWITCHES IP 54 - Table (continued) - Accessories EUROLOCKS - Keylock switch IP54 Description Photo Spare key (delivery content 1 key) Order no. Additional accessories see page - 5.58.006.801/0000 EUROLOCKS Keylock switch IP54 Technical data see page 4 - 177 PCB hole pattern, component side 4 Contact function Color Rotating angle Key removal position Order no. latching charcoal grey 1 x 90 0 3.13.009.001/0000 latching light grey 1 x 90 0 3.13.009.006/0000 latching charcoal grey 1 x 90 0+1 3.13.009.031/0000 latching light grey 1 x 90 0+1 3.13.009.036/0000 2 keys included. Other lock variants available on request. For the switching arrangement, refer to Micromec keylock switch IP54. Key Switches 4-178 PCB KEY SWITCHES PRIORITY KEYLOCK SWITCHES IP 54 PRIORITY KEYLOCK SWITCHES, IP54 Either 2 or 3 different keys are required, depending on the angle between positions. Key 1 can switch to position 1, key 2 can switch to position 1 and 2, etc. Technical Data General information Color Form of collar see order block square Dimensions Length of collar Width of collar Overall height 19 mm 19 mm 19.5 mm Mechanical design Mounting Terminals Contact system Contact function Contact materials Illuminability Lock Wafers Lock type Number of locking positions Main key Key removal position soldering tin-plated cross contact self cleaning see order block Au alloy no Micromec 5 001 500 on request see order block Mechanical characteristics Switching torque Robustness max. Dielectric strength AC min. Rated power max. 0.04 ... 0.10 Nm 2 Nm 500 V 1W Electrical characteristics Rated voltage Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. 2 ... 35 V 100 mA 100 mE 200 mE 109 E 8 kV Other specifications Rotating angle Operating life Degree of protection from front side Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Flammability of materials ROHS compliant REACH compliant see order block 10,000 IP54 -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 UL 94 HB yes yes 4 PCB hole pattern, component side Key Switches 4-179 PCB KEY SWITCHES PRIORITY KEYLOCK SWITCHES IP 54 Accessories Priority keylock switch IP54 Description Photo Order no. Additional accessories see page O-ring for keylock switch 5.30.120.015/0100 5 - 31 Set of keys for 2 x 90 type (2 keys) 5.58.099.012/0000 - Set of keys for 3 x 90 type (3 keys) 5.58.099.013/0000 - Priority keylock switch IP54 Technical data see page 4 - 179 PCB hole pattern, component side 4 Contact function Color Rotating angle Key removal position Order no. latching charcoal grey 3 x 90 0 3.13.027.011/0000 latching light grey 3 x 90 0 3.13.027.511/0000 latching charcoal grey 3 x 90 0+1+2+3 3.13.027.016/0000 latching light grey 3 x 90 0+1+2+3 3.13.027.516/0000 latching charcoal grey 2 x 90 0 3.13.027.001/0000 latching light grey 2 x 90 0 3.13.027.501/0000 latching charcoal grey 2 x 90 0+1+2 3.13.027.006/0000 latching light grey 2 x 90 0+1+2 3.13.027.506/0000 2 sets of keys included. Other lock variants available on request. For the switching arrangement, see IP54 Micromec keylock switch. Either 2 or 3 different keys are required, depending on the angle between positions. Key 1 can switch to position 1, key 2 can switch to position 1 and 2, etc. Key Switches 4-180 PCB KEY SWITCHES ROTARY SWITCHES IP40 ROTARY SWITCHES, IP40 Technical Data General information Color Form of collar see order block square Dimensions Length of collar Width of collar Overall height 19 mm 19 mm 24 mm Mechanical design Mounting Terminals Contact system Contact function Contact materials Illuminability soldering tin-plated cross contact self cleaning see order block Au alloy no Mechanical characteristics Torque against stop min. Dielectric strength AC min. Rated power max. 0.45 Nm see order block 1W Electrical characteristics Rated voltage max. Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. 35 V 100 mA 100 mE 200 mE 109 E 8 kV Other specifications Rotating angle Operating life Degree of protection from front side Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Flammability of materials ROHS compliant REACH compliant see order block 50,000 IP40 (DIN EN 60529) -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 UL 94 HB yes yes 4 PCB hole pattern, component side Key Switches 4-181 PCB KEY SWITCHES ROTARY SWITCHES IP40 Rotary switch IP40 Technical data see page 4 - 181 PCB hole pattern, component side Contact function Color Rotating angle Order no. latching charcoal grey 1 x 90 3.13.007.001/0152 latching charcoal grey 3 x 90 3.13.007.021/0152 latching charcoal grey 4 x 90 3.13.007.031/0152 latching charcoal grey 2 x 90 3.13.007.011/0152 Other color variants available on request 4 Key Switches 4-182