440 440-001 EMI/RFI Crimp Ring Adapter Direct Coupling - Standard Profile 440 F S 001 M 16 32-6 CONNECTOR DESIGNATORS * Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series A-B -C-D-E-F G-H-J-K-L-S Connector Designator Cable Entry (Table V) Angle and Profile H = 45 J = 90 S = Straight * Conn. Desig. B See Note 5 Shell Size (Table I) DIRECT COUPLING Finish (Table II) Basic Part No. Length * A Thread (Table I) O-Ring K ** B (Table I) * Length .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) L** E (Table IV) F (Table IV) B (Table I) M** Crimp Ring Length .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) J (Table III) J (Table III) P** G (Table IV) R** B (Table I) STYLE 2 (STRAIGHT See Note 1) ** (Table V) N** H (Table IV) See inside back cover fold-out or pages 13 and 14 for Tables I and II. 1. When maximum cable entry (page 22- Introduction) is exceeded, Style 2 will be supplied. (Function S only). 2. For proper installation of crimp ring, use Thomas & Betts (or equivalent) installation dies listed (Table V) for each dash no. 3. Metric dimensions (mm) are indicated in parentheses. 4. Consult factory for shorter lengths on straight backshells. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. (c) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 440 - Page 8 440 440-001 EMI/RFI Crimp Ring Adapter Direct Coupling - Standard Profile Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F J-H-L-S D-B-G-K C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) Dash No.'s (Table V) 06-23 26-30 31-32 33 34 35 36 38-39 TABLE IV: ELBOW DIMENSIONS E F G Max Max Max .639 (16.2) .702 (17.8) .750 (19.1) .664 (16.9) .732 (18.6) .812 (20.6) 1.040 (26.4) .688 (17.5) .875 (22.2) .705 (17.9) 1.070 (27.2) .920 (23.4) .732 (18.6) 1.090 (27.7) .980 (24.9) .773 (19.6) 1.100 (27.9) 1.020 (25.9) 1.160 (29.5) 1.140 (29.0) .800 (20.3) .823 (20.9) 1.190 (30.2) 1.200 (30.5) H Max .812 (20.6) .875 (22.2) 1.220 (31.0) 1.290 (32.8) 1.350 (34.3) 1.370 (34.8) 1.510 (38.4) 1.580 (40.1) TABLE V: CABLE ENTRY Dash No. 06 10 13 16 20 23 26 29 30 31 32 33 34 35 36 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 K Nom .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) (c) 2005 Glenair, Inc. L Nom .090 (2.3) .124 (3.1) .149 (3.8) .175 (4.4) .219 (5.6) .250 (6.4) .275 (7.0) .297 (7.5) .312 (7.9) .375 (9.5) .430 (10.9) .550 (14.0) .670 (17.0) .810 (20.6) .920 (23.4) 1.040 (26.4) 1.122 (28.5) 1.224 (31.1) 1.353 (34.4) 1.425 (36.2) 1.550 (39.4) 1.675 (42.5) 1.800 (45.7) 1.925 (48.9) 2.050 (52.1) 2.175 (55.2) 2.300 (58.4) 2.425 (61.6) 2.530 (64.3) 2.655 (67.4) 2.780 (70.6) 2.905 (73.8) M Nom .113 (2.9) .145 (3.7) .179 (4.5) .215 (5.5) .250 (6.4) .281 (7.1) .306 (7.8) .335 (8.5) .365 (9.3) .406 (10.3) .500 (12.7) .620 (15.7) .750 (19.1) .880 (22.4) 1.000 (25.4) 1.120 (28.4) 1.192 (30.3) 1.294 (32.9) 1.423 (36.1) 1.545 (39.2) 1.670 (42.4) 1.795 (45.6) 1.920 (48.8) 2.045 (51.9) 2.170 (55.1) 2.295 (58.3) 2.420 (61.5) 2.545 (64.6) 2.670 (67.8) 2.795 (71.0) 2.920 (74.2) 3.045 (77.3) N Nom .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) CAGE Code 06324 P Nom .156 (4.0) .187 (4.7) .225 (5.7) .261 (6.6) .297 (7.5) .327 (8.3) .375 (9.5) .405 (10.3) .425 (10.8) .500 (12.7) .590 (15.0) .710 (18.0) .840 (21.3) 1.010 (25.7) 1.130 (28.7) 1.250 (31.8) 1.332 (33.8) 1.440 (36.6) 1.562 (39.7) 1.670 (42.4) 1.795 (45.6) 1.920 (48.8) 2.045 (51.9) 2.170 (55.1) 2.295 (58.3) 2.420 (61.5) 2.545 (64.6) 2.670 (67.8) 2.795 (71.0) 2.920 (74.2) 3.045 (77.3) 3.170 (80.5) R Nom .194 (4.9) .227 (5.8) .256 (6.5) .297 (7.5) .335 (8.5) .372 (9.4) .406 (10.3) .453 (11.5) .473 (12.0) .560 (14.2) .670 (17.0) .790 (20.1) .920 (23.4) 1.090 (27.7) 1.210 (30.7) 1.330 (33.8) 1.412 (35.9) 1.520 (38.6) 1.643 (41.7) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.125 (54.0) 2.250 (57.2) 2.375 (60.3) 2.500 (63.5) 2.625 (66.7) 2.750 (69.9) 2.875 (73.0) 3.000 (76.2) 3.125 (79.4) 3.250 (82.6) Color Code (Ref.) Yellow Orange Purple Yellow Green Tin Yellow Red Tin Green Red Blue Gray Brown Green Pink Orange Purple Yellow Red Blue Gray Brown Green Pink Orange Purple Yellow Red Blue Gray Brown Inst. Tool Die No. (Note 2) WT402 WT406 WT409 WT411 WT414 WT416 WT440/5451 WT440/5452 WT440/5454 WT440/5457 GS590 GS710 GS840 GS1010 GS1130 GS1250 GS1332 GS1440 GS1563 GS1670 GS1795 GS1920 GS2045 GS2170 GS2295 GS2420 GS2545 GS2670 GS2795 GS2920 GS3045 GS3170 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 440 - Page 9