MJ15003 - NPN MJ15004 - PNP MECHANICAL DATA Dimensions in mm (inches) 4 0 .0 1 (1 .5 7 5 ) M a x . 2 6 .6 7 (1 .0 5 0 ) M a x . COMPLEMENTARY DARLINGTON POWER TRANSISTOR 4 .4 7 (0 .1 7 6 ) R a d . 2 P ls . FEATURES 2 2 .2 3 (0 .8 7 5 ) M a x . 1 1 .4 3 (0 .4 5 0 ) 6 .3 5 (0 .2 5 0 ) 1 2 .1 9 (0 .4 8 ) 1 .6 3 (0 .0 6 4 ) 1 1 .1 8 (0 .4 4 ) 1 .5 2 (0 .0 6 0 ) 1 .5 7 (0 .0 6 2 ) 1 .4 7 (0 .0 5 8 ) D ia . 3 0 .4 0 (1 .1 9 7 ) 2 9 .9 0 (1 .1 7 7 ) * HIGH DC CURRENT GAIN hFE = 25 Min @ IC = 5A * FOR LOW DISTORTION COMPLEMENTARY DESIGNS * JUNCTION TEMPERATURE TO +200C 4 .0 9 (0 .1 6 1 ) 3 .8 4 (0 .1 5 1 ) 2 P ls 1 1 .1 8 (0 .4 4 0 ) 1 0 .6 7 (0 .4 2 0 ) APPLICATIONS 1 6 .9 7 (0 .6 6 8 ) 1 6 .8 7 (0 .6 6 4 ) TO-3 (TO-204AA) Pin 1 - Base Pin 2 - Emitter Case - Collector The MJ15003 and MJ15004 are power transistors designed for high power audio and other linear applications. ABSOLUTE MAXIMUM RATINGS (Tcase = 25C unless otherwise stated) VCEO Collector - Emitter Voltage 140V VCBO Collector - Base Voltage 140V VEBO Emitter - Base Voltage 5V IC Continuous Collector Current 20A IB Base Current 5A Ptot Total Dissipation at Tcase = 25C Derate above 25C TSTG , TJ Operating and Storage Junction Temperature Range 250W 1.43W/C -65 to +200C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3734 Issue 1 MJ15003 - NPN MJ15004 - PNP Parameter Test Conditions Min. Typ. Max. Unit OFF CHARACTERISTICS VCEO(sus)* Collector - Emitter Breakdown Voltage ICEX Collector - Emitter Cut-Off Current V 140 IC = 200mA IB = 0 VCE = 140V VBE = 1.5V TC = 150C 100 A 2 mA A ICEO Collector - Emitter Cut-Off Current VCE = 140V IB = 0 250 IEBO Emitter - Base VEB = 5V IC = 0 100 Cut-Off Current ON CHARACTERISTICS hFE* DC Current Gain VCE = 2V IC = 5A VCE(sat)* Collector - Emitter Saturation Voltage IC = 5A IB = 500mA 1 VBE(on)* Base - Emitter On Voltage IC = 5A VCE = 2V 2 25 150 -- V DYNAMIC CHARACTERISTICS fT Transition Frequency IC = 0.5A VCE = 10V f = 500KHz Cob Output Capacitance IE = 0 VCB = 10V f = 1MHz MHz 2 1000 pF * Pulse Test: tp 300s, 2%. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3734 Issue 1