The JE connector is a compact, board-to-
board connector only 6.8 mm high and
3.6 mm wide. Its mating part has a 1.25 mm
pitch, single row construction.
High contact pressure dual beam fork
contacts are combined with a housing lock
mechanism to ensure a reliable connection.
• A compact design to meet today's needs
• Secure locking and reliable connection
• Box shaped housing
• Easy mounting and no flux problems
Specifications –––––––––––––––––––
• Current rating: 1.0 A AC, DC
• Voltage rating: 50 V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value / 20 mΩmax.
After environmental tests / 40 mΩmax.
• Insulation resistance: 500 MΩmin.
• Withstanding voltage: 500 VAC/minute
• Applicable PC board thickness: 1.6 mm
*Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
*Compliant with RoHS.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
Plug Receptacle
Note: 1. The above figure is the figure viewed from the connector soldering side.
2. Tolerances are non-cumulative:
±
0.05 mm for all centers.
3. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.