https://www.phoenixcontact.com/us/produkte/2800878
18.01.2013Page2/8
Thermomagnetic device circuit breaker-CB TM2 16A SFB
P-2800878
Technical data
Technical data
Fuse type SFB
Rated surge voltage 2.5 kV (Increased insulation in actuation area)
Rated voltage 240 V AC (Ue according to IEC 60934)
Rated voltage 277 V AC (UL 1077)
Rated voltage 277 V AC (UL 508 - with plug-in base)
Rated voltage 80 V DC (IEC 60934)
Rated voltage 80 V DC (UL 1077)
Rated voltage 80 V DC (UL 508 - with plug-in base)
Rated current In16 A (IEC 60934)
Rated current In16 A AC (inductive load according to UL 1077)
Rated current In16 A DC (low-induction load according to UL 1077)
Rated current In
16 A DC (low-induction load according to UL 508 - with plug-in
base)
Rated insulation voltage Ui277 V AC (UL 1077)
Rated insulation voltage Ui250 V AC (IEC 60934)
Insulation resistance Riso:> 100 MΩ (500 V DC)
Auxiliary circuit 277 V AC/0.5 A(Low-induction)
Auxiliary circuit 277 V AC/1 A(Low-induction, maximum of 2000 cycles)
Auxiliary circuit 50 V DC/1 A(Low-induction)
Type of actuation S type
Tripping method TM (thermomagnetic)
Tripping level Trip-free mechanism (positive)
Required backup fuse ≥ 64 A
Rated short-circuit switching capacity Icn 400 A (240 V AC)
Rated short-circuit switching capacity Icn 600 A (80 V DC)
Dielectric strength 3000 V AC (Actuation area)
Dielectric strength 1500 V AC (Main to auxiliary circuit)
Dielectric strength 1500 V AC (Open main circuit)
Dielectric strength 1000 V AC (Open auxiliary circuit)
Dielectric strength 1500 V AC (Position to position)
Voltage drop 0.13 V (at 1 x In)
Cycles, max. 6000 (240 V AC/1 x In)
Cycles, max. 3000 (80 V DC/1 x In)
Contact type 2 PDT
Standards
Standard - Electrical safety EN 60934
Standard - Electrical safety UL 1077
Standard - Electrical safety UL 508
Standard - Electrical safety CSA 22.2 No. 235-041