POWEREX INC TAIMEREX LSE D Me 72e94bel COO3bL3 7 mm F732 -99 ED___ _ 27 ED____ _25 ED41__ 26 Tentative Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (412) 925-7272 Powerex Europe, S.A., 428 Avenue G. Durand, BP107, 72003 Le Mans, France (43) 72.75.15 OUTLINE K THO.(21 gta 6 | | U a Ty. Tt Dual SCR, SCR/Diode a } Ip 8 a isolated Modues | L 4 | 210-250-260 Amperes/100-2000 Volts T Ordering Information Example: Select the complete eight digit rating module part number you desire from the table i.e. ED430825 Dual SCR, SCR/Diode is an 800 Volt, 250 Ampere Dual SCR Isolated M odules Phase Control Module. Outline Drawing Vom Current Rating Type Volts (x100) Amperes (x10) Dimension Inches Millimeters ED41 o1 21 A 4,52 115 ED42 02 25 B 3.66 93 ED43 04 26* ED45** 06 C 38 35 D a 28.5 ED46"" 08 - - ED47 10 F 1.50 38 ED72 14 G 3.15 80 ED77 16 H 22 5.5 18 J 74 18.5 20 K M8 Note: All voltages are not avaltable in every type. Insert L 35 9 cade in digits 5 and 6 of part number to specify voltage (example: ED430625 is a 600 Volt, 250 Ampere dual M 2.05 52 SCR module). Diode voltage is same as SCR except for N 1.93 49 ED72, E077, where suffix OY or OZ is added to denote 1.7 times SCR or 2.0 times SCR (example: Oo 1,34 34 &D72122102Z provides 1200 Volts SCR, 2400 Volt P 31 8 Diode). Q 2.16 55 *260A rating available in ED41 type only. R 55 14 $ _ MB **Consult factory for available rating. T 2.09 63.1 U 110 X .032 2.8 X 0.8 Vv 52 13 Dual SCR, SCR/Diode Isolated Modules 210-250-260 Amperes 100-2000 Volts Description The POW-R-BLOK combines multi- ple power semiconductor devices in a single, electrically isolated module. POW-R-BLOK can serve as the essential circuit element in many in- dustrial applications, such as motor speed control, battery chargers, tap changers, transfer switches, and light- ing controls. A variety of dual diode and SCR and diode combinations are available for use in 120, 240, 480 or 575 volt power line applications. Semiconductor elements are se- cured by CBE (Compression Bonded Encapsulation) for excellent cycling performance. POW-R-BLOK features a self- contained electrical isolation system. By using high thermal conductivity BeO ceramic isolators, excellent circuit-to-baseplate isolation (= 2500 valts RMS) has been achieved, while maintaining efficient cooling of the semiconductors. All ED Series SCRs use the di/ Namic gate structure for ease of trig- gering and high di/dt capability. Features: {1 Compression Bonded Encapsulation QO) Isolated Base Plate QO Insulated Package Low Thermal Impedance Metal Base Plate Benefits: C] No Additional Insulating Components Required C1 Easy Installation (C1 Reduced Engineering Time (1 Improved Heat Transfer O Voltage Stability 421422 POWEREX INC LSE D MM 7294621 OOO3bb4 1 7 SZ3BVOI YOWEREX 7 Fentatve, Tentative Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (412) 925-7272 Powerex Europe, S.A., 428 Avenue G. Durand, BP107, 72003 Le Mans, France (43) 72.75.15 ED _ 21,ED___.____ 25, ED41__ ___ 26 Dual SCR, ; SCR/Diode Isolated Modules 210-250-260 Amperes/100-2000 Volts Absolute Maximum Ratings Characteristics Symbol ED____ 2a ED _ St 5 EDAT Units Peak Forward Blocking Voltage Vorm SCR to 2000 Volts Peak Reverse Blocking Voltage VaRM SCR to 2000, Diode to 2000 Volts Transient Peak Reverse Blocking Voltage (Non-Repetitive) t<5 ms VasM SCR to 2200, Diode to 2200 Volts DC Reverse Blocking Voltage Vevoc) SCR to 1600, Diode to 1600 Volts RMS On-State Current lrams), 'eams) 330 393 408 Amperes Average On-State Current law. !rrawy 210 250 260 Amperes Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz) ism, lesa 6000 6500 8000 Amperes Peak Three-Cycle Surge (Non-Repetitive) On-State Current (60Hz) lrsm. lesa 4325 4685 5750 Amperes Peak Ten-Cycle Surge (Non-Repetitive) On-Sfate Current (60 Hz} Inga, lesa 3730 4040 4975 | Amperes lt (for Fusing), 8.3 milliseconds l2t 149,000 175,000 266,000 A?sec Critical Rate-of-Rise of On-State Current (Non-Repetitive) O @ difdt 800 800 800 Amperes/ps Peak Gate Power Dissipation Pam 16 16 16 Watts Average Gate Power Dissipation Paay - 3.0 3.0 3.0 Watts Peak Forward Gate Voltage Vor 10 10 10 Volts Peak Reverse Gate Voltage Vor 5.0 5.0 5.0 Volts Peak Forward Gate Current lerm 4.0 4.0 4.0 Amperes Storage Temperature Tste -40 to 150 -40 to 150 -40 to 150 C Operating Temperature Ty -40 to 130 ~40 10 180 =~ 40 to 130 C Maximum Mounting Torque M6 Mounting Screw 50 50 50 in.-lb. Maximum Terminal Torque M8 Terminal Screw - 130 130 130 in.-lb. V Isolation Vams 2500 2500 2600 Volts @ Per JEDEC STD AS-397, 5.2.2.6, @ With recommended gate drive.POWEREX INC TEIMEREX LSE D MM 7294b2e1 0003665 0 mm 7 WI3-09 TASI3 Tentative Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (412) 925-7272 Powerex Europe, S.A., 428 Avenue G. Durand, BP107, 72003 Le Mans, France (43) 72.75.15 ED_._._. _. 21, ED____. __ 25, ED41 _____ 26 Dual SCR, SCR/Diode Isolated Modules 210-250-260 Amperes/100-2000 Volts Electrical and Thermal Characteristics T;=25C untess otherwise specified Characteristics Symbol Test Conditions ED et ED EDA Units Blocking State Maximums Forward Leakage Current, Peak lonm Ty = 130C, Vor = rated 50 50 50 mA Reverse Leakage Current, Peak lana T)= 130C, Vanm =rated 50 50 50 mA Conducting State Maximums Peak On-State Voltage Vim ly = 625A 1.40 1.30 - Volts Peak On-State Voltage Vem ley= 1500A 1.60 1.60 1.60 Volts Switching Minimums Critical Rate of Rise of Off-State Voltage dv/dt Ty = 130C, 600 500 _ Volts/psec Vp= 2/3 VorM Turn-Off Time (Typical) ty 1;=250A, Ty = 130C 150 150 _ psec Reapplied dv/dt=20V/psec linear to 0.8 Vpau Turn-On Time (Typical) ton Ity= 100A, Vp = 100V 7 7 _ psec Diode Reverse Recovery Time ley = 1500A, Tp = 190nsec (Typical) te - di/dt= 25 Alusec 10 10 10 psec Thermal Maximums Thermal Resistance, Junction to . Case Rec Per Module 0.09 0,09 0.09 C /Watt Thermal Resistance, Case to Sink Lubricated Recs Per Module 0.03 0.03 0.03 C Matt Gate Parameters Maximums Gate Current to Trigger ler Vp= 12V 150 150 = mA Gate Voltage to Trigger Ver Vp =12V 3 3 _ Voits Non-Triggering Gate Voltage Voom Ty= 130C, Vp = 1/2 Vorm 0.15 0.15 _ Volts WARNING: Internal insulation used Is Beryllium Ox- Ide. User should avoid grinding, crushing or abrading these portions. Care must be exercised in properly disposing of un- wanted modules. 423POWEREX INC LSE D M@ 72T4bel OOO3LLE 2 my 72730 424 5 - Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (412) 925-7272 Powerex Europe, S.A., 428 Avenue G. Durand, BP107, 72003 Le Mans, France (43) 72.75.15 ED_._.____. 21, FED_._._.__- 25, ED41____ 26 Dual SCR, SCR/Diode Isolated Modules 210-250-260 Amperes/100-2000 Volts Connection Diagrams ED43 Dual SCR Phase Control Xx) e____, E046 Dual SCR Fast Switch* oe SRD 7a SRI Sax sete Lt oe ED42 SCR/Diode Phase Control ae ED45 SCR/Diode Fast Switch* o'er ST SR ED72 SCR/Diode Current Source** te wak o> TO: t ED47 Diode/SCR Phase Control a6 + 048 _Diode/SCR Fast Switch _ opi ot x ED77 Diode/SCR Current Source* * Glee kK 2e__ ED41 __Diode/Diode Standard Recovery 2 oe: ED44 Diode/Diode Fast Recovery* 0-49 -9 in Consult factory for available ratings **Ratings identical to ED42/ED47 This specification is tentative; therefore, performance curves are not included. Please contact the Powerex. sales representative nearest you for further information.