Page 1 of 3 Series-connected high-frequency noise filter with transient protection. Offers the flexibility of either receptacle/line cord connection or hard-wired connection to critical loads (up to 30 amperes). Applications include industrial or office equipment, computers placed in harsh environments. Typically reduces normal mode transients to +/- 2 volts Surge current capacity--45,000 Amps Transient protection in all modes: line to neutral, line to ground, and neutral to ground LED power indication UL 1283, CSA recognized 10-year warranty Typical Category A Ringwave MCOV 120 Volt 150 VRMS 240 Volt 275 VRMS Line Frequency 47-63 Hz Response Time Normal Mode Common Mode < 0.5 ns < 5 ns Operating Temperature -40C to +45C at Full Load Derate Linearly to 60% at +70C Operating Humidity 0% to 95% Peak Surge Current Capability (8 x 20 s) Line to Neutral 15,000 Amps Line to Ground 15,000 Amps Neutral to Ground 15,000 Amps Load Surge Current Rating 10 mSec 5 x Nominal 1 sec 3 x Nominal 10 Sec 2 x Nominal Packaging * High-Impact Plastic Case (6 kV, 200A, 100 kHz) MODEL NORMAL COMMON IC+102 / LRIC+102 1.0 / 0.9 302 / 287 IC+105 / LRIC+105 0.7 / 0.8 292 / 307 IC+107 / LRIC+107 0.7 / 0.7 302 / 293 IC+115 / LRIC+115 0.7 / 0.7 304 / 306 IC+130 / IC+202 0.5 / 1.1 306 / 536 IC+205 / IC+207 1.5 / 0.8 628 / 616 IC+215 / IC+230 0.6 / 0.9 572 / 566 Typical Category B Ringwave (6 kV, 500A, 100 kHz) MODEL NORMAL COMMON IC+102 / LRIC+102 178 / 188 302 / 285 IC+105 / LRIC+105 162 / 191 291 / 300 IC+107 / LRIC+107 173 / 190 300 / 298 IC+115 / LRIC+115 153 / 149 307 / 309 IC+130 / IC+202 241 / 302 299 / 532 IC+205 / IC+207 378 / 336 594 / 596 IC+215 / IC+230 272 / 342 548 / 578 Page 2 of 3 Note: All measurements in volts. IEEE test results with no AC applied. Normal mode--L1-N or L1-L2; Common mode--L-G, N-G or L1-G, L2-G. * Vacuum Impregnated Magnetics * Epoxy Encapsulated Frequency Response (Forward-Reverse) 100 kHz to 50 MHz-- 90 dB Min Normal Mode 5 MHz to 50 MHz-- 60 dB Min Common Mode 120 VAC Models with Barrier Strip at Input & Output / with Wire Leads at Input & Output (WL) RATED OUTPUT (AMPS) CASE DIM. (in.) AxBxC IC+102/IC+102WL 2.5 4x2.88x1.81 4.38x2.12x5.31x0.19 #6 1.0 IC+105/IC+105WL 5.0 4x2.88x1.81 4.38x2.12x5.31x0.19 #6 1.3 IC+107/IC+107WL 7.5 4.75x4.75x2.35 5.25x3.50x6.25x0.19 #6 2.0 IC+115/IC+115WL 15 6.25x4.75x2.35 6.75x3.50x7.75x0.19 #8 3.5 IC+130/IC+130WL 30 7.75x4.75x2.35 8.25x3.50x9.00x0.19 #8 6.0 MODEL MOUNTING FLANGE DIM. (in.) SCREW DxExFxG SIZE WGHT. (lbs.) 120 VAC Models with 5-Foot Line Cord & Single NEMA 5-15 Receptacle RATED OUTPUT (AMPS) CASE DIM. (in.) AxBxC MOUNTING FLANGE DIM. (in.) DxExFxG SCREW SIZE WGHT. (lbs.) LRIC+102 2.5 4.5x3.0x1.88 N/A N/A 1.3 LRIC+105 5.0 4.5x4.5x2.38 N/A N/A 2.0 LRIC+107 7.5 6.0x4.5x2.38 N/A N/A 2.3 LRIC+115 15 7.5x4.5x2.38 N/A N/A 4.0 MODEL 240 VAC Models with Barrier Strip at Input & Output / with Wire Leads at Input & Output (WL) MODEL RATED OUTPUT (AMPS) CASE DIM. (in.) AxBxC MOUNTING FLANGE DIM. (in.) DxExFxG SCREW SIZE WGHT. (lbs.) IC+202/IC+202WL 2.5 4x2.88x1.81 4.38x2.12x5.31x0.19 #6 1.3 IC+205/IC+205WL 5.0 4.75x4.75x2.35 5.25x3.50x6.25x0.19 #6 2.0 IC+207/IC+207WL 7.5 6.25x4.75x2.35 6.75x3.50x7.75x0.19 #8 3.3 IC+215/IC+215WL 15 7.75x4.75x2.35 8.25x3.50x9.00x0.19 #8 5.8 IC+230/IC+230WL 30 7.75x4.75x2.35 8.25x3.50x9.00x0.19 #8 6.0