PDTC115TT NPN resistor-equipped transistor; R1 = 100 k, R2 = open Rev. 03 -- 27 July 2004 Product data sheet 1. Product profile 1.1 General description NPN resistor-equipped transistor. PNP complement: PDTA115TT. 1.2 Features Built-in bias resistor Simplifies circuit design Reduces component count Reduces pick and place costs. 1.3 Applications General purpose switching and amplification Inverter and interface circuits Circuit drivers. 1.4 Quick reference data Table 1: Quick reference data Symbol Parameter VCEO Conditions Min Typ Max Unit collector-emitter voltage - - 50 V IO output current (DC) - - 100 mA R1 bias resistor - 100 - k R2 open - - - k 2. Pinning information Table 2: Pinning Pin Description 1 base 2 emitter 3 collector Simplified outline Symbol 3 3 R1 1 1 2 SOT23 2 sym012 PDTC115TT Philips Semiconductors NPN resistor-equipped transistor; R1 = 100 k, R2 = open 3. Ordering information Table 3: Ordering information Type number PDTC115TT Package Name Description Version - plastic surface mounted package; 3 leads SOT23 4. Marking Table 4: Marking Type number Marking code [1] PDTC115TT *AK [1] * = p: made in Hong Kong. * = t: made in Malaysia. * = W: made in China. 5. Limiting values Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VCBO collector-base voltage open emitter - 50 V VCEO collector-emitter voltage open base - 50 V VEBO emitter-base voltage open collector - 5 V IO output current (DC) - 100 mA ICM peak collector current - 100 mA - 250 mW -65 +150 C Tamb 25 C [1] Ptot total power dissipation Tstg storage temperature Tj junction temperature - 150 C Tamb ambient temperature -65 +150 C [1] Refer to standard mounting conditions. 6. Thermal characteristics Table 6: Symbol Rth(j-a) [1] Thermal characteristics Parameter Conditions thermal resistance from junction to ambient Typ Unit 500 K/W Refer to standard mounting conditions. 9397 750 13505 Product data sheet in free air [1] (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 03 -- 27 July 2004 2 of 7 PDTC115TT Philips Semiconductors NPN resistor-equipped transistor; R1 = 100 k, R2 = open 7. Characteristics Table 7: Characteristics Tamb = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit ICBO collector-base cut-off current VCB = 50 V; IE = 0 A - - 100 nA ICEO collector-emitter cut-off current VCE = 30 V; IB = 0 A - - 1 A VCE = 30 V; IB = 0 A; Tj = 150 C - - 50 A IEBO emitter-base cut-off current VEB = 5 V; IC = 0 A - - 100 nA hFE DC current gain VCE = 5 V; IC = 1 mA 100 - - VCEsat collector-emitter saturation voltage IC = 5 mA; IB = 0.25 mA - - 150 mV R1 input resistor 70 100 130 k Cc collector capacitance - - 2.5 pF IE = ie = 0 A; VCB = 10 V; f = 1 MHz 006aaa058 103 hFE 006aaa059 1 VCEsat (V) (1) (2) 10-1 (3) (1) (2) (3) 102 10-1 1 102 10 10-2 10-1 IC (mA) 102 10 IC (mA) VCE = 5 V. IC/IB = 20. (1) Tamb = 100 C. (1) Tamb = 100 C. (2) Tamb = 25 C. (2) Tamb = 25 C. (3) Tamb = -40 C. (3) Tamb = -40 C. Fig 1. DC current gain as a function of collector current; typical values. Fig 2. Collector-emitter saturation voltage as a function of collector current; typical values. 9397 750 13505 Product data sheet 1 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 03 -- 27 July 2004 3 of 7 PDTC115TT Philips Semiconductors NPN resistor-equipped transistor; R1 = 100 k, R2 = open 8. Package outline Plastic surface mounted package; 3 leads SOT23 D E B A X HE v M A 3 Q A A1 1 2 e1 bp c w M B Lp e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max. bp c D E e e1 HE Lp Q v w mm 1.1 0.9 0.1 0.48 0.38 0.15 0.09 3.0 2.8 1.4 1.2 1.9 0.95 2.5 2.1 0.45 0.15 0.55 0.45 0.2 0.1 OUTLINE VERSION SOT23 REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 97-02-28 99-09-13 TO-236AB Fig 3. Package outline. 9397 750 13505 Product data sheet (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 03 -- 27 July 2004 4 of 7 PDTC115TT Philips Semiconductors NPN resistor-equipped transistor; R1 = 100 k, R2 = open 9. Revision history Table 8: Revision history Document ID Release date Data sheet status Change notice Order number Supersedes PDTC115TT_3 20040727 Product data - 9397 750 13505 PDTC115TT_2 Modifications: PDTC115TT_2 Modifications: PDTC115TT_1 * * Data sheet upgraded from Objective to Product data. Figure 1 and Figure 2 added. 20040510 * Objective data - 9397 750 13206 PDTC115TT_1 - 9397 750 12554 - Table 7: value for Cc added. 20040305 Objective data 9397 750 13505 Product data sheet (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 03 -- 27 July 2004 5 of 7 PDTC115TT Philips Semiconductors NPN resistor-equipped transistor; R1 = 100 k, R2 = open 10. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 11. Definitions 12. Disclaimers Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 13. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com 9397 750 13505 Product data sheet (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 03 -- 27 July 2004 6 of 7 PDTC115TT Philips Semiconductors NPN resistor-equipped transistor; R1 = 100 k, R2 = open 14. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 1 2 2 2 2 3 4 5 6 6 6 6 (c) Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 27 July 2004 Document order number: 9397 750 13505 Published in The Netherlands