1. Product profile
1.1 General description
NPN resistor-equipped transistor. PNP complement: PDTA115TT.
1.2 Features
1.3 Applications
1.4 Quick reference data
2. Pinning information
PDTC115TT
NPN resistor-equipped transistor; R1 = 100 kΩ, R2 = open
Rev. 03 — 27 July 2004 Product data sheet
■Built-in bias resistor ■Reduces component count
■Simplifies circuit design ■Reduces pick and place costs.
■General purpose switching and
amplification ■Circuit drivers.
■Inverter and interface circuits
Table 1: Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
VCEO collector-emitter voltage - - 50 V
IOoutput current (DC) - - 100 mA
R1 bias resistor - 100 - kΩ
R2 open - - - kΩ
Table 2: Pinning
Pin Description Simplified outline Symbol
1 base
2 emitter
3 collector
SOT23
12
3
sym012
3
2
1R1
9397 750 13505 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet Rev. 03 — 27 July 2004 2 of 7
Philips Semiconductors PDTC115TT
NPN resistor-equipped transistor; R1 = 100 kΩ, R2 = open
3. Ordering information
4. Marking
[1] * = p: made in Hong Kong.
* = t: made in Malaysia.
* = W: made in China.
5. Limiting values
[1] Refer to standard mounting conditions.
6. Thermal characteristics
[1] Refer to standard mounting conditions.
Table 3: Ordering information
Type number Package
Name Description Version
PDTC115TT - plastic surface mounted package; 3 leads SOT23
Table 4: Marking
Type number Marking code[1]
PDTC115TT *AK
Table 5: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VCBO collector-base voltage open emitter - 50 V
VCEO collector-emitter voltage open base - 50 V
VEBO emitter-base voltage open collector - 5 V
IOoutput current (DC) - 100 mA
ICM peak collector current - 100 mA
Ptot total power dissipation Tamb ≤25 °C[1] - 250 mW
Tstg storage temperature −65 +150 °C
Tjjunction temperature - 150 °C
Tamb ambient temperature −65 +150 °C
Table 6: Thermal characteristics
Symbol Parameter Conditions Typ Unit
Rth(j-a) thermal resistance from junction
to ambient in free air [1] 500 K/W
9397 750 13505 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet Rev. 03 — 27 July 2004 3 of 7
Philips Semiconductors PDTC115TT
NPN resistor-equipped transistor; R1 = 100 kΩ, R2 = open
7. Characteristics
Table 7: Characteristics
T
amb
=25
°
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
ICBO collector-base cut-off
current VCB =50V; I
E= 0 A - - 100 nA
ICEO collector-emitter
cut-off current VCE =30V; I
B=0A --1µA
VCE =30V; I
B=0A;
Tj= 150 °C--50µA
IEBO emitter-base cut-off
current VEB =5V; I
C= 0 A - - 100 nA
hFE DC current gain VCE =5V; I
C= 1 mA 100 - -
VCEsat collector-emitter
saturation voltage IC= 5 mA; IB= 0.25 mA - - 150 mV
R1 input resistor 70 100 130 kΩ
Cccollector capacitance IE=i
e = 0 A; VCB =10V;
f=1MHz - - 2.5 pF
VCE = 5 V.
(1) Tamb = 100 °C.
(2) Tamb = 25 °C.
(3) Tamb =−40 °C.
IC/IB= 20.
(1) Tamb = 100 °C.
(2) Tamb = 25 °C.
(3) Tamb =−40 °C.
Fig 1. DC current gain as a function of collector
current; typical values. Fig 2. Collector-emitter saturation voltage as a
function of collector current; typical values.
006aaa058
IC (mA)
10−1102
101
103
hFE
102
(1)
(2)
(3)
006aaa059
IC (mA)
10−1102
101
10−1
1
VCEsat
(V)
10−2
(1)
(3)
(2)
9397 750 13505 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet Rev. 03 — 27 July 2004 4 of 7
Philips Semiconductors PDTC115TT
NPN resistor-equipped transistor; R1 = 100 kΩ, R2 = open
8. Package outline
Fig 3. Package outline.
UNIT A1
max. bpcDE e1HELpQwv
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
97-02-28
99-09-13
IEC JEDEC EIAJ
mm 0.1 0.48
0.38 0.15
0.09 3.0
2.8 1.4
1.2 0.95
e
1.9 2.5
2.1 0.55
0.45 0.1
0.2
DIMENSIONS (mm are the original dimensions)
0.45
0.15
SOT23 TO-236AB
bp
D
e1
e
A
A1
Lp
Q
detail X
HE
E
wM
vMA
B
AB
0 1 2 mm
scale
A
1.1
0.9
c
X
12
3
Plastic surface mounted package; 3 leads SOT23
9397 750 13505 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet Rev. 03 — 27 July 2004 5 of 7
Philips Semiconductors PDTC115TT
NPN resistor-equipped transistor; R1 = 100 kΩ, R2 = open
9. Revision history
Table 8: Revision history
Document ID Release date Data sheet status Change notice Order number Supersedes
PDTC115TT_3 20040727 Product data - 9397 750 13505 PDTC115TT_2
Modifications: • Data sheet upgraded from Objective to Product data.
•Figure 1 and Figure 2 added.
PDTC115TT_2 20040510 Objective data - 9397 750 13206 PDTC115TT_1
Modifications: •Table 7: value for Cc added.
PDTC115TT_1 20040305 Objective data - 9397 750 12554 -
Philips Semiconductors PDTC115TT
NPN resistor-equipped transistor; R1 = 100 kΩ, R2 = open
9397 750 13505 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet Rev. 03 — 27 July 2004 6 of 7
10. Data sheet status
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
11. Definitions
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
12. Disclaimers
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
13. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
Level Data sheet status[1] Product status[2] [3] Definition
I Objective data Development This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
© Koninklijke Philips Electronics N.V. 2004
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner. The information presented in this document does
not form part of any quotation or contract, is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under
patent- or other industrial or intellectual property rights. Date of release: 27 July 2004
Document order number: 9397 750 13505
Published in The Netherlands
Philips Semiconductors PDTC115TT
NPN resistor-equipped transistor; R1 = 100 kΩ, R2 = open
14. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description. . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
6 Thermal characteristics. . . . . . . . . . . . . . . . . . . 2
7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3
8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 4
9 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 5
10 Data sheet status. . . . . . . . . . . . . . . . . . . . . . . . 6
11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
12 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
13 Contact information . . . . . . . . . . . . . . . . . . . . . 6
