AQ-N High capacity SSR up to 40A with wide variation AQ-N RELAYS FEATURES TYPICAL APPLICATIONS 1. Five types available from 10A to 40A 2. Built-in varistor 3. Includes operation LED (red) 4. Dielectric voltage of 4,000V 5. 4 to 32V DC input voltage 6. Both zero-cross and random types available 1. Molding machine (heater control) 2. Temperature controlled bath (heater control) 3. Printing machines (heater control) 4. Wrapping and packing machine (heater control) 5. Machine tools (Motor control) Compliance with RoHS Directive ORDERING INFORMATION A Q N AQ-N Solid State Relays Load current 1: 10 A 2: 15 A 3: 20 A 4: 25 A 6: 40 A Load voltage 1: 75 to 250 V AC, Zero-cross 2: 75 to 250 V AC, Random Input voltage 1: 4 to 32 V DC Function Nil: None V: Built-in varistor L: With LED indication VL: Built-in varistor and with LED indication TYPES 1. Standard type Type Zero-cross type Random type Load current 10A 15A 20A 25A 40A 10A 15A 20A 25A 40A Load voltage 75 to 250V AC 75 to 250V AC All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Part No. AQN111 AQN211 AQN311 AQN411 AQN611 AQN121 AQN221 AQN321 AQN421 AQN621 AQ-N 2. With LED indication type Type Load current 10A 15A 20A 25A 40A 10A 15A 20A 25A 40A Zero-cross type Random type Load voltage Part No. AQN111L AQN211L AQN311L AQN411L AQN611L AQN121L AQN221L AQN321L AQN421L AQN621L 75 to 250V AC 75 to 250V AC 3. With varistor type Type Load current 10A 15A 20A 25A 40A 10A 15A 20A 25A 40A Zero-cross type Random type Load voltage Part No. AQN111V AQN211V AQN311V AQN411V AQN611V AQN121V AQN221V AQN321V AQN421V AQN621V 75 to 250V AC 75 to 250V AC 4. With varistor and LED indication type Type Load current 10A 15A 20A 25A 40A 10A 15A 20A 25A 40A Zero-cross type Random type Load voltage Part No. AQN111VL AQN211VL AQN311VL AQN411VL AQN611VL AQN121VL AQN221VL AQN321VL AQN421VL AQN621VL 75 to 250V AC 75 to 250V AC Standard packing; carton: 2 pcs., case: 100 pcs. 5. Accessories Type Standard heat sink (10A, 15A and 20A) Standard heat sink (25A) Standard heat sink (40A) Slim heat sink (45mm wide) (Mountable on a DIN rail) DIN rail mounting plate Terminal cover Part No. AQP-HS-J10A AQP-HS-30/40A AQP-HS-J25A AQP-HS-SJ20A AQP-DP AQP-NPC Packaged quantity 5 in a carton, 20 in a case 5 in a carton, 20 in a case No carton, 5 in a case No carton, 8 in a case 10 in a carton, 100 in a case 2 in a carton, 100 in a case RATINGS 1. Ratings (Measurement condition: at 20C 68F, Input ripple: 1% or less) 1) Zero-cross type Type Item Part No. Input side Output side Notes: *1. *2. *3. *4. 10A AQN111 AQN111L AQN111V AQN111VL Input voltage Input current Drop-out voltage Max. load current Load voltage Frequency Non-repetitive surge current Max. "OFF-state" leakage current Max. "ON-state" voltage drop Min. load current 15A 20A 25A 40A AQN211 AQN211L AQN211V AQN211VL AQN311 AQN311L AQN311V AQN311VL AQN411 AQN411L AQN411V AQN411VL AQN611 AQN611L AQN611V AQN611VL 10A 15A 100A 150A 4 to 32V Max. 20mA Min. 1V 20A 75V to 250V 45Hz to 65Hz 200A Max. 10mA 1.6V 100mA Remarks *1 *1 25A 40A *2 250A 400A In one cycle at 60Hz *3 at 60Hz at Max. carrying current *4 Please refer to REFERENCE DATA, "3. Input current vs. input voltage". Please refer to REFERENCE DATA, "1. Load current vs. ambient temperature". Please refer to REFERENCE DATA, "2. Non-repetitive surge current vs. carrying time". When the load current is less than the rated minimum load current, please refer to "Cautions for Use of SSR". All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AQ-N 2) Random type Type Item Part No. Input side Output side Notes: *1. *2. *3. *4. 10A AQN121 AQN121L AQN121V AQN121VL Input voltage Input current Drop-out voltage Max. load current Load voltage Frequency Non-repetitive surge current Max. "OFF-state" leakage current Max. "ON-state" voltage drop Min. load current 15A 20A 25A 40A AQN221 AQN221L AQN221V AQN221VL AQN321 AQN321L AQN321V AQN321VL AQN421 AQN421L AQN421V AQN421VL AQN621 AQN621L AQN621V AQN621VL 10A 15A 100A 150A 4 to 32V Max. 20mA Min. 1V 20A 75V to 250V 45Hz to 65Hz 200A Max. 10mA 1.6V 100mA Remarks *1 *1 25A 40A *2 250A 400A In one cycle at 60Hz *3 at 60Hz at Max. carrying current *4 Please refer to REFERENCE DATA, "3. Input current vs. input voltage". Please refer to REFERENCE DATA, "1. Load current vs. ambient temperature". Please refer to REFERENCE DATA, "2. Non-repetitive surge current vs. carrying time". When the load current is less than the rated minimum load current, please refer to "Cautions for Use of SSR". 2. Characteristics (Measurement condition: at 20C 68F, Input ripple: 1% or less) 1) Zero-cross type Type Part No. Operate time, max. Release time, max. Insulation resistance, min. Breakdown voltage Vibration resistance (Functional) Shock resistance (Functional) Ambient temperature 10A AQN111 AQN111L AQN111V AQN111VL 15A 20A 25A 40A AQN211 AQN211L AQN211V AQN211VL AQN311 AQN311L AQN311V AQN311VL AQN411 AQN411L AQN411V AQN411VL AQN611 AQN611L AQN611V AQN611VL 1/2 cycle of voltage sine wave + 1ms 1/2 cycle of voltage sine wave + 1ms 100M between input and output 4,000 Vrms between input and output; 2,500 Vrms between input, output and case 10 to 55Hz double amplitude of 1.5mm Min. 980 m/s2 -20C to +80C -4F to +176F*2 Storage temperature Operational method -25C to +85C -13F to +185F Zero-cross (Turn-ON and Turn-OFF) Remarks at 500 V DC for 1min. X, Y, Z axes X, Y, Z axes Non-condensing at low temperatures 2) Random type Type Part No. Operate time, max. Release time, max. Insulation resistance, min. Breakdown voltage Vibration resistance (Functional) Shock resistance (Functional) Ambient temperature Storage temperature Operational method 10A AQN121 AQN121L AQN121V AQN121VL 15A 20A 25A 40A AQN221 AQN221L AQN221V AQN221VL AQN321 AQN321L AQN321V AQN321VL AQN421 AQN421L AQN421V AQN421VL AQN621 AQN621L AQN621V AQN621VL 1ms 1/2 cycle of voltage sine wave + 1ms 100M between input and output 4,000 Vrms between input and output; 2,500 Vrms between input, output and case 10 to 55Hz double amplitude of 1.5mm Min. 980 m/s2 -20C to +80C -4F to +176F -25C to +85C -13F to +185F Random Turn-ON, Zero-cross Turn-OFF All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Remarks at 500 V DC for 1min. X, Y, Z axes X, Y, Z axes Non-condensing at low temperatures AQ-N REFERENCE DATA 1. Load current vs. ambient temperature Use load current within range specified in the figure below. Tested condition Without external heat sink If the mounting surface is not metallic and a heat sink is not used, expose the bottom surface and plate surface to improve heat dissipation. (2) 15A type (3) 20A type When using AQP-HS-J10A When using a steel plate of 150x150xt1.6 (mm) or greater 15 When using a steel plate of 100x100xt1.6 (mm) or greater 25 20 40 60 80 Ambient temperature, C 0 100 (5) 40A type 0 20 40 60 80 Ambient temperature, C When using AQP-HS-30/40A 30 25 When using a steel plate of 150x150xt1.6 (mm) or greater 20 When using a steel plate of 100x100xt1.6 (mm) or greater 40 A type 25 A type 20 20 A type 15 15 A type 10 15 10 A type 10 0 -20 0 20 40 60 80 Ambient temperature, C 100 0 0 20 40 60 80 Ambient temperature, C 100 Input current, mA 12 10 With LED Without LED 4 2 5 10 15 20 25 30 Input voltage, V 40A type 25A type 200 14 0 100 300 16 6 20 40 60 80 Ambient temperature, C 20A type 15A type 10 A type 400 3. Input current vs. input voltage 10A, 15A, 20A, 25A, 40A common 8 0 100 5 When using as stand-alone When using a steel plate of 75x75xt1.6 (mm) or greater -20 2. Non-repetitive surge current vs. carrying time Non-repetitive surge current, A 35 5 0 100 500 25 Load current, A Load current, A When using AQP-HS-J25A (mm) or greater When using as stand-alone 5 30 40 (mm) or greater When using a steel 10 plate of 100x100xt1.6 (6) Data when mounted on an AQP-HS-SJ20A slim heat sink 45 When using a steel 15 plate of 150x150xt1.6 When using a steel plate of 75x75xt1.6 (mm) or greater -20 When using AQP-HS-30/40A 20 When using as stand-alone 5 20 40 60 80 100 Ambient temperature, C When using AQP-HS-J10A Load current, A Load current, A Load current, A 30 10 0 (4) 25A type 25 5 0 6 0 -20 When using as stand-alone -20 8 20 10 When using AQP-HS-J10A or a steel plate of 100x100xt0.8 (mm) or greater 10 2 When using AQP-HS-J10A or a steel plate of 150x150xt1.6 (mm) or greater When using a steel plate of 100x100xt1.6 (mm) or greater 0 12 When using as 4 stand-alone 20 15 (1) 10A type Load current, A With external heat sink 1) (1) 10A, 15A, 20A type Shown with standard heat sink (AQP801) (2) Shown with 25A type standard heat sink (AQP804) (3) Shown with 40A type standard heat sink (AQP806) (4) In the case of the AQP812 slim heat-sink types, characteristics data are available for each type. Please refer to (6). 2) If attached to a heat sink, use a heat conductive compound (Ex. Toshiba silicone YG6111 or TSK5303) of similar coating to improve cooling. 35 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 0 1 10 No. of cycles at 60 Hz 100 AQ-N DIMENSIONS (mm inch) * The right figure is the LED indication type. The standard type has the same dimensions. The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac External dimensions Schematic 58.0 2.283 43.2 1.701 2-M3 2-M4 . dia ia. 4.5 77 d .1 CAD Data 45.0 25.4 4.5 1.772 1.000 .177 11.4 .449 Input power source _ + 4 1 3 2 Load Load power source 27.9 1.098 Mounting dimensions 47.5 +0.2 -0.1 1.870 +.008 -.004 2-4.3 dia. or M4 2-.069 dia. or M4 47.5 1.870 27.0 max. 1.063 max. 20.0 .787 22.0 .866 ACCESSORIES AQP-HS-SJ20A Slim Heat Sink 100 90 78 40 CAD Data Mounting dimensions 3.937 3.543 3.071 1.575 2-4.6 dia. or M4 2-.181 dia. or M4 5-M4 (Effective screw depth: 6mm .236inch) 6 .236 6 30 .236 1.181 4.6 dia. .181 dia. 900.2 3.543.008 4.6x5.6 elliptical hole .181x.220 45 1.772 30 47.6 1.874 1.181 78 83 3.071 3.268 1.6 .063 General tolerance: 1.0 .039 AQP812 70707 Note: When using on a DIN rail, please install so that the "A" part is on top. "A" part AQP-HS-J10A Standard Heat Sink 4.4 .173 CAD Data 50 1.969 4.4 .173 R2.2 .087 Mounting dimensions 2 .079 4-M4 or 4.4 dia. 4-M4 or .173 dia. 1.5 .059 3-M4 54 2.126 90 3.543 11.1 .437 2 .079 30 1.181 47.6 1.874 100 3.937 AQP-HS-30/40A Standard Heat Sink 900.1 3.543.004 1.5 .059 500.2 1.969.008 Mounting dimensions 4.4 .173 4-M4 or 4.4 dia. 4-M4 or .173 dia. 2 .079 11.1 .437 R 2.2 .087 3-M4 90 3.543 24.5 .965 28.5 9 .354 1.122 45 1.772 80 3.150 50 1.969 4.4 .173 CAD Data 100 +0.5 -1.5 3.937 +.020 -.059 33.3 1.311 47.6 1.874 80 3.150 33.3 100+0.5 -1.5 1.311 3.937+.020 -.059 54 2.126 900.1 3.543.004 1.5 .059 56 2.205 150 5.906 2 .079 9 .354 General tolerance: 0.5 .020 1.5 .059 24.5 .965 28.5 1.122 45 1.772 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 500.2 1.969.008 AQ-N AQP-HS-J25A Standard Heat Sink Mounting dimensions 4-R2.5 4-R.098 CAD Data 3- 4-M4.5 or 5 dia. 4-M4.5 or .197 dia. M 4 5 .197 30 1.181 47.5 119 150 1.870 4.685 5.906 1190.1 4.685.004 1320.1 5.197.004 132 5.197 2 .079 7 .276 52 2.047 3 .118 46 64 82 100 120 142 1.811 2.520 3.228 3.937 4.724 5.591 13 .512 AQP-DP DIN Rail Mounting Plate AT8-DLA1 Mounting Rail CAD Data 13.6 .535 56 2.205 47.6 1.874 M4 M4 CAD Data M4 18.1 .713 44 1.732 1,000 39.37 5.5 .217 70 2.765 86 3.386 5 .197 15 10 15 .591 .394 .591 AQP-NPC Terminal Cover CAD Data CAD Data 7.5 .295 4-7 dia. 4-.276 dia. 44.6 1.756 27.9 1.098 1.5 .059 57.5 43.2 2.264 1.701 12 .472 50 M4 1.969 10 .394 25.4 1.000 UP ATA4806 35 1.378 24 1.5 5 .945 .059 .197 40-5.5x15 slot 40-.217x.591 slot General tolerance: 0.5 .020 ATA4806 Fastening Plate 2.75R 15 10 15 .108R .591 .394 .591 10 .394 24 .945 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 2 .079 10 .394 27 1.063 AQ-N Recommended Temperature Controllers <KT4H Temperature Controller> Our temperature controller is recommended for use with our Solid State Relays. Features * Data can be collected using the RS485 communications interface via a PLC. * Improved visibility using a negative type LCD and backlight. * Depth-wise length (chassis dimension) is 56 mm 2.205 inch. 48mm 1.890inch 56mm 2.205inch 48mm 1.890inch Substitute part numbers Power supply 100 to 240 V AC Control output Relay contact Part No. AKT4H111100 *For detailed product information about temperature controllers, please refer to our website: http://panasonic-denko.co.jp/ac/e/fasys/component/temperature_controller/ For Cautions for Use All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: AQP-HS-30/40A AQP-HS-J25A