VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 1Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VDR Metal Oxide Varistors Ultra Surge
High Operating Temperature 125 °C
LINKS TO ADDITIONAL RESOURCES
ORDERING INFORMATION
The varistors are available in a number of packaging
options:
•Bulk
• On tape on reel
• On tape in ammopack
The basic ordering code for each option is given in tables
titled Varistors on Tape on Reel, Varistors on Tape in
Ammopack, and Varistors in Bulk. To complete the catalog
number and to determine the required operating
parameters, see Electrical Data and Ordering Information
table.
Note
• Special lead-configuration as inside or outside crimped leads
available upon request
AGENCY APPROVALS
• cUL certificate
• ULus certificate
• VDE certificate
Note
• Agency approval documents, please see:
www.vishay.com/varistors/list/product-29185/tab/documents/
FEATURES
•Low high purity zinc oxide disc
• Halogen free high temperature resistant silicone
coated
• Straight or kinked leads
• Ultra high current surge/size ratio capability up
to 13 kA for US20 types
• Certified for operation up to 125 °C according to
UL 1449 edition 4, VDE/IEC 61051-1/2
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATION
• Overvoltage and transient voltage protection
DESCRIPTION
The varistors consist of a disc of low-ß ceramic material with
two solid copper leads (US20 types only) or copper clad
steel wire. The wires have a matte tin plating. They are
coated with UL 94 V-0 approved silicone lacquer, which
provides electrical, mechanical and climatic protection.
MOUNTING
The varistors are suitable for hand-mounting (bulk) or
automatic pick and place mounting (T and R). The parts can
be connected by wave soldering and pin-in-paste reflow
soldering under defined process conditions. Bending of the
leads for different angle placement is not recommended.
Typical Soldering
235 °C, duration: 5 s (Pb-bearing)
245 °C, duration: 5 s (lead (Pb)-free)
Resistance to Soldering Heat
260 °C, duration: 10 s max.
MARKING
The varistors are marked with the following information:
• Maximum continuous RMS voltage with - U suffix
• Series numbers
- 572 for VDRUS07
- 573 for VDRUS10
- 575 for VDRUS14
- 576 for VDRUS20
• Manufacture logo
• Date of manufacture (YYWW)
• Safety marks on VDRUS10-14-20 types
INFLAMMABILITY
The varistors are passive non-flammable. The encapsulation
is made of flame resistant silicone in accordance with
UL 94 V-0.
QUICK REFERENCE DATA
PARAMETER VALUE UNIT
Maximum continuous voltage in
operating temperature range:
RMS 115 to 680 V
DC 150 to 895 V
Maximum non-repetitive transient
current INRP (8 x 20 μs) 1800 to 13 000 A
Maximum energy
(10/1000 μs) 19 to 720 J
Detailed specification Based on
IEC 61051-1
IEC 61051-2
IEC 61051-2-2
Storage temperature -40 to +150 °C
Operating temperature -40 to +125 °C
REG F313
3
3
3
D
D
D
3
D
3D Models
Design Tools
Models
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 2Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL DATA AND ORDERING INFORMATION
MAXIMUM
CONTINUOUS
VOLTAGE
VOLTAGE
AT 1 mA
(3)
MAXIMUM
VOLTAGE
AT STATED
CURRENT
MAXIMUM
ENERGY
(4)
(10 x 1000 μs)
MAXIMUM
NON-REP.
TRANSIENT
CURRENT
(5)
I
NRP
(8 x 20 μs)
NOMINAL
DISCHARGE
CURRENT
(7)
TYPICAL
CAPACITANCE
AT 1 kHz
T
(MAX.) ECATALOG
NUMBERS
(1)
RMS (2)
(V)
DC
(V) (V) V
(V)
I
(A) (J) (A) (kA) (pF) (mm) (mm) SAP (6)
115 150 180
300 10.0
19 1800 1
390 3.6 0.9 ± 0.3
VDRUS07M115xyE
300 25.0
47 4500 2
680 4.0 1.1 ± 0.3
VDRUS10T115xyE
300 50.0
65 8000 3
1320 4.0 1.1 ± 0.3
VDRUS14X115xyE
300 100.0
152 13 000 5
2640 4.4 1.3 ± 0.3
VDRUS20Z115ByE
130 170 205
340 10.0
21 1800 1
320 3.8 1.0 ± 0.3
VDRUS07M130xyE
340 25.0
52 4500 2
580 4.3 1.2 ± 0.3
VDRUS10T130xyE
340 50.0
82 8000 3
1050 4.3 1.2 ± 0.3
VDRUS14X130xyE
340 100.0
175 13 000 5
2100 4.8 1.4 ± 0.3
VDRUS20Z130ByE
140 180 220
360 10.0
23 1800 1
290 3.9 1.0 ± 0.3
VDRUS07M140xyE
360 25.0
58 4500 2
540 4.3 1.2 ± 0.3
VDRUS10T140xyE
360 50.0
90 8000 3
950 4.3 1.2 ± 0.3
VDRUS14X140xyE
360 100.0
185 13 000 5
1900 4.8 1.5 ± 0.3
VDRUS20Z140ByE
150 200 240
395 10.0
25 1800 1
270 4.1 1.1 ± 0.3
VDRUS07M150xyE
395 25.0
64 4500 2
490 4.3 1.3 ± 0.3
VDRUS10T150xyE
395 50.0
98 8000 3
850 4.3 1.3 ± 0.3
VDRUS14X150xyE
395 100.0
198 13 000 5
1700 4.8 1.5 ± 0.3
VDRUS20Z150ByE
175 225 275
455 10.0
28 1800 1
230 4.1 1.3 ± 0.3
VDRUS07M175xyE
455 25.0
67 4500 2
430 4.9 1.5 ± 0.3
VDRUS10T175xyE
455 50.0
116 8000 3
750 4.9 1.5 ± 0.3
VDRUS14X175xyE
455 100.0
220 13 000 5
1500 4.9 1.7 ± 0.3
VDRUS20Z175ByE
195 250 300
505 10.0
32 1800 1
210 4.3 1.4 ± 0.8
VDRUS07M195xyE
505 25.0
70 4500 2
380 5.1 1.6 ± 0.8
VDRUS10T195xyE
505 50.0
128 8000 3
690 5.1 1.6 ± 0.8
VDRUS14X195xyE
505 100.0
245 13 000 5
1350 5.1 1.9 ± 0.8
VDRUS20Z195ByE
210 275 330
550 10.0
34 1800 1
190 4.4 1.6 ± 0.8
VDRUS07M210xyE
550 25.0
72 4500 2
350 5.3 1.8 ± 0.8
VDRUS10T210xyE
550 50.0
140 8000 3
610 5.3 1.8 ± 0.8
VDRUS14X210xyE
550 100.0
268 13 000 5
1250 5.3 2.0 ± 0.8
VDRUS20Z210ByE
230 300 360
595 10.0
37 1800 1
170 4.6 1.7 ± 0.8
VDRUS07M230xyE
595 25.0
76 4500 2
320 5.4 1.9 ± 0.8
VDRUS10T230xyE
595 50.0
158 8000 3
540 5.4 1.9 ± 0.8
VDRUS14X230xyE
595 100.0
315 13 000 5
1100 5.4 2.2 ± 0.8
VDRUS20Z230ByE
250 320 390
650 10.0
40 1800 1
160 4.8 1.9 ± 0.8
VDRUS07M250xyE
650 25.0
82 4500 2
300 5.5 2.1 ± 0.8
VDRUS10T250xyE
650 50.0
170 8000 3
480 5.5 2.1 ± 0.8
VDRUS14X250xyE
650 100.0
350 13 000 5
960 5.5 2.3 ± 0.8
VDRUS20Z250ByE
275 350 430
710 10.0
46 1800 1
140 4.9 2.0 ± 0.8
VDRUS07M275xyE
710 25.0
93 4500 2
270 6.3 2.2 ± 0.8
VDRUS10T275xyE
710 50.0
185 8000 3
440 5.3 2.2 ± 0.8
VDRUS14X275xyE
710 100.0
380 13 000 5
900 5.8 2.5 ± 0.8
VDRUS20Z275ByE
300 385 470
775 10.0
49 1800 1
130 5.1 2.2 ± 0.8
VDRUS07M300xyE
775 25.0
99 4500 2
240 6.5 2.4 ± 0.8
VDRUS10T300xyE
775 50.0
205 8000 3
400 5.5 2.4 ± 0.8
VDRUS14X300xyE
775 100.0
405 13 000 5
810 5.9 2.7 ± 0.8
VDRUS20Z300ByE
320 420 510
842 10.0
54 1800 1
120 5.5 2.4 ± 0.8
VDRUS07M320xyE
842 25.0
107 4500 2
220 7.0 2.6 ± 0.8
VDRUS10T320xyE
842 50.0
220 8000 3
370 6.0 2.6 ± 0.8
VDRUS14X320xyE
842 100.0
445 13 000 5
750 6.3 2.9 ± 0.8
VDRUS20Z320ByE
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 3Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) The products are certified according to cULus (E332800), and VDE (40051495). See Agency Approval section on page1 for certificate
download section
(2) The sinusoidal voltage is assumed as the normal operating condition. If a non-sinusoidal voltage is present, type selection should be based
on multiplying the peak voltage by a factor of 0.707
(3) The voltage measured at 1 mA meets the requirements of IEC 61051.
The tolerance on the voltage at 1 mA is ± 10 %
(4) High energy surges are generally of longer duration. The maximum energy for one pulse of 10 x 1000 μs is given as a reference for longer
duration pulses. This pulse can be characterized by peak current (Ip) and pulse width t2 (virtual time of half Ip value). If Vp is the clamping
voltage corresponding to Ip, the energy absorbed in the varistor is determined by the formula:
where K is dependent on the value of t2 (see Peak Current as a Function of Pulse Width drawing)
(5) A current wave of 8 x 20 μs is used as a standard for pulse current and clamping voltage ratings. The maximum non-repetitive transient
current is given for one pulse applied during the life of the component
(6) For composition of the SAP part number:
Replace “x” by B for bulk type Replace “y” by S for straight leads
T for tape and reel K for kinked leads (bulk only)
A for tape and ammopack L for kinked leads with H0 = 16 mm (tape and reel/ammo)
M for kinked leads with H0 = 18.25 mm (tape and reel/ammo)
(7) All varistors are UL1449 edition 4 recognized as SPD type 5 (component level) for operating temperatures up to 125 °C. The varistors may
be used in other SPD types as 2, 3, or 4 depending on the indicated nominal discharge current ratings. The final acceptance of the
component is dependent upon its installation and use in complete equipment submitted to Underwriters Laboratories Inc.
350 460 560
920 10.0
55 1800 1
110 5.8 2.7 ± 0.8
VDRUS07M350xyE
920 25.0
113 4500 2
200 7.1 2.9 ± 0.8
VDRUS10T350xyE
920 50.0
240 8000 3
320 6.1 2.9 ± 0.8
VDRUS14X350xyE
920 100.0
475 13 000 5
650 6.5 3.2 ± 0.8
VDRUS20Z350ByE
385 505 620
1025 10.0
59 1800 1
95 6.0 3.0 ± 0.8
VDRUS07M385xyE
1025 25.0
125 4500 2
180 7.5 3.2 ± 0.8
VDRUS10T385xyE
1025 50.0
250 8000 3
280 6.5 3.2 ± 0.8
VDRUS14X385xyE
1025 100.0
490 13 000 5
570 6.8 3.5 ± 0.8
VDRUS20Z385ByE
420 560 680
1120 10.0
62 1800 1
85 6.3 3.2 ± 0.8
VDRUS07M420xyE
1120 25.0
128 4500 2
165 7.7 3.4 ± 0.8
VDRUS10T420xyE
1120 50.0
260 8000 3
250 6.7 3.4 ± 0.8
VDRUS14X420xyE
1120 100.0
500 13 000 5
510 7.1 3.7 ± 0.8
VDRUS20Z420ByE
460 615 750
1290 5.0
66 1800 1
30 6.6 3.6 ± 0.8
VDRUS07M460xyE
1240 25.0
134 4500 2
150 8.0 3.8 ± 0.8
VDRUS10T460xyE
1240 50.0
270 8000 3
225 7.0 3.8 ± 0.8
VDRUS14X460xyE
1240 100.0
525 13 000 5
450 7.5 4.1 ± 0.8
VDRUS20Z460ByE
485 640 780
1290 10.0
68 1800 1
65 6.8 3.7 ± 0.8
VDRUS07M485xyE
1290 25.0
139 4500 2
145 8.3 3.9 ± 0.8
VDRUS10T485xyE
1290 50.0
274 8000 3
220 7.3 3.9 ± 0.8
VDRUS14X485xyE
1290 100.0
530 13 000 5
400 7.6 4.2 ± 0.8
VDRUS20Z485ByE
510 670 820
1355 10.0
71 1800 1
62 7.0 3.9 ± 0.8
VDRUS07M510xyE
1355 25.0
146 4500 2
135 8.5 4.1 ± 0.8
VDRUS10T510xyE
1355 50.0
280 8000 3
220 7.5 4.1 ± 0.8
VDRUS14X510xyE
1355 100.0
545 13 000 5
400 7.9 4.4 ± 0.8
VDRUS20Z510ByE
550 745 910
1500 25.0
152 4500 2
120 8.9 4.5 ± 0.8
VDRUS10T550xyE
1500 50.0
295 8000 3
180 7.9 4.5 ± 0.8
VDRUS14X550xyE
1500 100.0
595 13 000 5
320 8.3 4.9 ± 0.8
VDRUS20Z550ByE
625 825 1000
1650 25.0
170 4500 2
105 9.4 5.0 ± 0.8
VDRUS10T625ByE
1650 50.0
335 8000 3
165 8.4 5.0 ± 0.8
VDRUS14X625ByE
1650 100.0
650 13 000 5
280 8.8 5.3 ± 0.8
VDRUS20Z625ByE
680 895 1100
1815 25.0
180 4500 2
80 10.8 5.4 ± 0.8
VDRUS10T680ByE
1815 50.0
360 8000 3
150 9.8 5.4 ± 0.8
VDRUS14X680ByE
1815 100.0
720 13 000 5
250 10.2 5.8 ± 0.8
VDRUS20Z680ByE
ELECTRICAL DATA AND ORDERING INFORMATION
MAXIMUM
CONTINUOUS
VOLTAGE
VOLTAGE
AT 1 mA
(3)
MAXIMUM
VOLTAGE
AT STATED
CURRENT
MAXIMUM
ENERGY
(4)
(10 x 1000 μs)
MAXIMUM
NON-REP.
TRANSIENT
CURRENT
(5)
I
NRP
(8 x 20 μs)
NOMINAL
DISCHARGE
CURRENT
(7)
TYPICAL
CAPACITANCE
AT 1 kHz
T
(MAX.) ECATALOG
NUMBERS
(1)
RMS (2)
(V)
DC
(V) (V) V
(V)
I
(A) (J) (A) (kA) (pF) (mm) (mm) SAP (6)
EK x V
p x Ip x t2
=
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 4Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL CHARACTERISTICS
DERATING CURVE PEAK CURRENT AS A FUNCTION OF PULSE
WIDTH
Note
(1) Tmax. and E values per size and voltage level can be found back in the Electrical Data table
ELECTRICAL DATA
PARAMETER VALUE UNIT
Maximum continuous voltage:
RMS 115 to 680 V
DC 150 to 895 V
Maximum non-repetitive transient current (INRP) (8 x 20 μs)
VDRUS07 1800 A
VDRUS10 4500 A
VDRUS14 8000 A
VDRUS20 13 000 A
Thermal resistance:
VDRUS07 70 K/W
VDRUS10 60 K/W
VDRUS14 50 K/W
VDRUS20 40 K/W
Maximum dissipation:
VDRUS07 250 mW
VDRUS10 400 mW
VDRUS14 600 mW
VDRUS20 1000 mW
Temperature coefficient of voltage at 1 mA maximum ± 0.05 %/K
Voltage proof between interconnected leads and case 1000 V
Storage temperature -40 to +150 °C
Operating temperature -40 to +125 °C
100 %
0
- 40 125 Tamb (°C)
Maximum Voltage
Maximum Dissipation
Maximum Energy
Maximum Transient Current
150
t (µs)
t2
t1
Ip
(%)
100
0
10
50
90
t2 (µs)
20
50
100
1000
K
1
1.2
1.3
1.4
COMPONENT DIMENSIONS (BULK TYPE) in millimeters AND CATALOG NUMBERS
D
MAX.
A
MAX.
A0
MAX.
L
MIN.
T (1)
MAX
.
E (1) dF
CATALOG
NUMBER
MARKING
NUMBER
V 320 V V > 320 V V 300 V V > 300 V V 320 V V > 320 V
9.0 11.0 13.0 24.0 7.0 0.7 to 3.9 0.6 ± 0.05 5 ± 1.0 VDRUS07 572
12.0 12.5 14.5 15.5 16.5 17.0 24.0 10.8 0.9 to 5.4 0.8 ± 0.05 7.5 ± 1.0 VDRUS10 573
16.0 16.5 19.0 21.0 21.5 24.0 9.8 0.9 to 5.4 0.8 ± 0.05 7.5 ± 1.0 VDRUS14 575
22.5 23.0 25.5 27.5 28.0 24.0 10.2 1.1 to 5.8 1.0 ± 0.05 10 ± 1.0 VDRUS20 576
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 5Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in millimeters: see Component Dimensions and Electrical Data table
OUTLINE of Component with Straight Leads OUTLINE of Component with Kinked Leads
VARISTORS IN BULK
TYPE
VDRUS07
Ø 7 mm
115 V to 510 V
VDRUS10
Ø 10 mm
115 V to 680 V
VDRUS14
Ø 14 mm
115 V to 680 V
VDRUS20
Ø 20 mm
115 V to 680 V
Straight leads; see outline of components
with straight leads drawing BSE BSE BSE BSE
Kinked leads; see outline of components
with kinked leads drawing BKE BKE BKE BKE
Packaging quantities
115 V to 300 V 250 200 100 50
320 V to max. V 250 100 100 50
d
D
A
T
L
EF
d
A0
L
DT
F
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 6Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS OF AMMOPACK in millimeters
VARISTORS ON TAPE IN AMMOPACK
TYPE
VDRUS07
Ø 7 mm
115 V to 510 V
VDRUS10
Ø 10 mm
115 V to 550 V
VDRUS14
Ø 14 mm
115 V to 550 V
Straight leads
H = 18 mm - - ASE
H = 20 mm ASE ASE -
See drawing: taped version with straight leads
Kinked leads
H0 = 18.25 mm AME AME AME
H0 = 16 mm ALE ALE ALE
See drawing: taped version with kinked leads
Packaging quantities
115 V to 210 V 1500 500 500
230 V to 510 V 1000 500 500
550 V - 400 400
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 7Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGING
TAPED VERSION WITH STRAIGHT LEADS (only for VDRUS07)
TAPED VERSION WITH STRAIGHT LEADS (only for VDRUS10 and VDRUS14)
VARISTORS ON TAPE AND REEL
TYPE
VDRUS07
Ø 7 mm
115 V to 510 V
VDRUS10
Ø 10 mm
115 V to 550 V
VDRUS14
Ø 14 mm
115 V to 550 V
Straight leads
H = 18 mm - - TSE
H = 20 mm TSE TSE -
See drawing: taped version with straight leads
Kinked leads
H0 = 18.25 mm TME TME TME
H0 = 16 mm TLE TLE TLE
See drawing: taped version with kinked leads
Packaging quantities
115 V to 250 V 1500 1000 750
275 V to 300 V 1500 500 750
320 V to max. V 1000 500 500
T
ΔhΔh
A
T
1
t
L
P
0
P
1
D
0
F
d
D
P
ΔpΔp
W
0
W
2
W
1
H
W
T
ΔhΔh
A
T1t
P0
P1D0
F
d
D
P
ΔpΔp
W0
W2
W1
H
W
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 8Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TAPED VERSION WITH KINKED LEADS
(only for VDRUS07)
TAPED VERSION WITH KINKED LEADS
(only for VDRUS10 and VDRUS14)
Notes
(1) Guaranteed between component and tape
(2) For VDRUS14X510xSE and VDRUS14X550xSE: H = 20 mm ± 1 mm
T1t
T
ΔhΔh
A
P0P1D0
L
W0
W2
W1H0
W
F
d
D
P
ΔpΔp
T
ΔhΔh
A
T
1
t
P
0
P
1
D
0
F
W
0
W
2
W
1
H
0
W
d
D
P
ΔpΔp
TAPING DATA (based on IEC 60286-2)
SYMBOL PARAMETER DIMENSIONS/TOLERANCE
VDRUS07 VDRUS10 VDRUS14
A max.
Max. mounting
height
V 300 V
11.0
14.5
19.0
V > 300 V 15.5
A0 max.
Max. mounting
height
V 320 V 13.0 16.5 21.0
V > 320 V 17.0 21.5
D max.
Max. body
diameter
V 320 V 9.0 12.0 16.0
V > 320 V 12.5 16.5
d
Lead wire
diameter
0.6 ± 0.05 0.8 ± 0.05
F
Lead to lead
distance
(1) 5.0 + 0.8/- 0.2 7.5 ± 0.8
H
Distance
component
to tape
center
(2) 20.0 + 2.0/- 0.0 18.0 + 2.0/- 0.0
H0
Lead wire
clinch height
16.0 or 18.25 ± 0.5
P
Pitch of
components
on tape
12.7 ± 1.0 25.4 ± 1.0
T
Total
thickness
See Electrical Data table
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 9Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V/I CHARACTERISTICS
115 VRMS to 195 VRMS; VDRUS07
210 VRMS to 300 VRMS; VDRUS07
350 VRMS to 510 VRMS; VDRUS07
10
100
1000
10000
100
1000
Axis Title
1st line
2nd line
2nd line
Voltage (V)
Max. leakage current
Max. clamping voltage
195 V
175 V
150 V
140 V
130 V
115 V
103
Current (A)
104
102
101
100
10-1
10-2
10-3
10-4
10-5
10
100
1000
10000
100
1000
Axis Title
1st line
2nd line
2nd line
Voltage (V)
Max. leakage current
Max. clamping voltage
103
Current (A)
104
102
101
100
10-1
10-2
10-3
10-4
10-5
320 V
300 V
275 V
250 V
230 V
210 V
2000
10
100
1000
10000
100
1000
Axis Title
1st line
2nd line
2nd line
Voltage (V)
Max. leakage current
Max. clamping voltage
100
103
Current (A)
510 V
485 V
460 V
420 V
385 V
350 V
104
102
101
100
10-1
10-2
10-3
10-4
10-5
3000
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 10 Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V/I CHARACTERISTICS
115 VRMS to 210 VRMS; VDRUS10
230 VRMS to 385 VRMS; VDRUS10
420 VRMS to 680 VRMS; VDRUS10
10
100
2nd line
Voltage (V)
103
Current (A)
104
102
101
100
10-1
10-2
10-3
10-4
10-5
1000
2000
10
100
1000
10000
1st line
2nd line
Max. leakage current
10
100
1000
10000
100
1st line
2nd line
2nd line
Voltage (V)
210 V
195 V
175 V
150 V
140 V
130 V
115 V
103
Current (A)
104
102
101
100
10-1
10-2
10-3
10-4
10-5
1000
Axis Title
Max. clamping voltage
10
100
1000
10000
1st line
2nd line
Max. leakage current
10
100
1000
10000
100
1st line
2nd line
2nd line
Voltage (V)
103
Current (A)
104
102
101
100
10-1
10-2
10-3
10-4
10-5
1000
2000
385 V
350 V
320 V
300 V
275 V
250 V
230 V
Axis Title
Max. clamping voltage
10
100
1000
10000
Axis Title
1st line
2nd line
Max. leakage current
Max. clamping voltage
10
100
1000
10000
100
1000
1st line
2nd line
2nd line
Voltage (V)
103
Current (A)
104
102
101
100
10-1
10-2
10-3
10-4
10-5
3000
680 V
625 V
550 V
510 V
485 V
460 V
420 V
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 11 Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V/I CHARACTERISTICS
115 VRMS to 210 VRMS; VDRUS14
230 VRMS to 385 VRMS; VDRUS14
420 VRMS to 680 VRMS; VDRUS14
10
100
1000
10000
1st line
2nd line
Max. leakage current
10
100
1000
10000
100
1000
1st line
2nd line
2nd line
Voltage (V)
103
Current (A)
104
102
101
100
10-1
10-2
10-3
10-4
10-5
210 V
195 V
175 V
150 V
140 V
130 V
115 V
10000
Axis Title
Max. clamping voltage
10
100
1000
10000
1st line
2nd line
Max. leakage current
10
100
1000
10000
100
1st line
2nd line
2nd line
Voltage (V)
103
Current (A)
104
102
101
100
10-1
10-2
10-3
10-4
10-5
1000
2000
385 V
350 V
320 V
300 V
275 V
250 V
230 V
10000
Axis Title
Max. clamping voltage
10000
100
1000
10000
Axis Title
1st line
2nd line
Max. leakage current Max. clamping voltage
10
100
1000
10000
100
1st line
2nd line
2nd line
Voltage (V)
103
Current (A)
104
102
101
100
10-1
10-2
10-3
10-4
10-5
1000
3000
680 V
625 V
550 V
510 V
485 V
460 V
420 V
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 12 Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V/I CHARACTERISTICS
115 VRMS to 210 VRMS; VDRUS20
230 VRMS to 385 VRMS; VDRUS20
420 VRMS to 680 VRMS; VDRUS20
10
100
1000
2nd line
Voltage (V)
10
100
1000
10000
1st line
2nd line
Max. leakage current
103
Current (A)
105
102
101
100
10-1
10-2
10-3
10-4
10-5 104
210 V
195 V
175 V
150 V
140 V
130 V
115 V
Axis Title
Max. clamping voltage
10
100
1000
10000
1st line
2nd line
100
2nd line
Voltage (V)
103
Current (A)
105
102
101
100
10-1
10-2
10-3
10-4
10-5
1000
2000
104
Axis Title
Max. leakage current Max. clamping voltage
385 V
350 V
320 V
300 V
275 V
250 V
230 V
10
100
1000
10000
1st line
2nd line
10
100
2nd line
Voltage (V)
1000
3000
Max. leakage current
103
Current (A)
105
102
101
100
10-1
10-2
10-3
10-4
10-5 104
680 V
625 V
550 V
510 V
485 V
460 V
420 V
Axis Title
Max. clamping voltage
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 13 Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PULSE DERATING
115 VRMS to 510 VRMS; VDRUS07
115 VRMS to 680 VRMS; VDRUS10
115 VRMS to 680 VRMS; VDRUS14
10
100
1000
10000
1
10
100
1000
10 100 1000 10 000
Axis Title
1st line
2nd line
2nd line
Ipulse max. (A)
tpulse _∏_ (µs)
1800
5000
20
1 pulse
2
10
10
2
10
3
10
4
10
5
10
6
10
100
1000
10000
1
10
100
1000
10 100 1000 10 000
Axis Title
1st line
2nd line
2nd line
Ipulse max. (A)
tpulse _∏_ (µs)
20
1 pulse
2
10
102
103
104
105
106
10 000
4500
10
100
1000
10000
1
10
100
1000
10 000
10 100 1000 10 000
Axis Title
1st line
2nd line
2nd line
Ipulse max. (A)
tpulse _∏_ (µs)
20
1 pulse
2
10
102
103
104
105
106
6000
VDRUS Series
www.vishay.com Vishay BCcomponents
Revision: 18-Mar-2020 14 Document Number: 29185
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PULSE DERATING
115 VRMS to 680 VRMS; VDRUS20
10
100
1000
10000
1
10
100
1000
10 000
10 100 1000 10 000
Axis Title
1st line
2nd line
2nd line
Ipulse max. (A)
tpulse _∏_ (µs)
20
1 pulse
2
10
102
103
104
105
106
30 000
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2021 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED