HDWM-05-53-S-S-256-SM - Samtec Inc.

DO NOT

SCALE FROM

THIS PRINT

HDWM-XX-XX-XX-X-XXX-SM-XXX

BODY LENGTH SPEC

EXPRESSED IN # POS PER ROW

(-01 THRU -50)

BODY SPECIFICATION

-S: SINGLE (USE HTMS-XX-S)

-D: DOUBLE (USE HTMS-XX-D)

LEAD STYLE

SEE TABLE 1

PLATING SPECIFICATION

-G: 10µ" GOLD IN CONTACT AREA,

3µ" GOLD ON TAIL

-T: MATTE TIN CONTACT AND TAIL,

(ONLY AVAILABLE IN LEAD STYLE -01)

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-TM: MATTE TIN CONTACT AND TAIL,

(ONLY AVAILABLE IN LEAD STYLE -01)

-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

BOARD SPACE

"XXX" = "B"

(SEE TABLE 1)

(SEE NOTE 9)

OPTION

-POLARIZING SPECIFICATION

XXX INDICATES POSITION TO BE OMITTED

-A: STAKED ALIGNMENT PIN (SEE SHT 2, FIG 2)

(6 POS MIN, BODY SPEC -D ONLY, USE SM-A8H)

-LC: STAKED LOCKING CLIP (SEE SHT 2, FIG 3)

(5 POS MIN, BODY SPEC -D ONLY, USE LC-05-TM)

-P: PICK & PLACE PAD (SEE SHT 2, FIG 4)

(FOR SINGLE ROW, 9 POSITION MINIMUM REQUIRED)

(.100 MIN POST HEIGHT)

-SM: SURFACE MOUNT

OPTION

NO OF POS X .050

.010

.002

.096

2.44

REF

+.05

-.25

[ ]

MAX SWAY

(EITHER DIRECTION)

.100

REF

2.54

"B"

±.008

[

.20]

(SEE NOTE 9)

(MEASURE AT BEND RADIUS)

.018

0.46

REF (TYP)

CONTACT AREA

MAX SWAY

(EITHER DIRECTION)

T-1M6-XX-XX-2

FIG 1

HDWM-10-57-XX-X-400-SM SHOWN

.196 4.98

.050

REF

1.27

.050

REF

1.27

MAX SWAY

(EITHER DIRECTION)

.05 1.3

(MEASURE AT BEND RADIUS)

.050

(TYP)

1.27

90°

2°

4°

MAX SWAY

(EITHER DIRECTION)

R.028 [.71] REF

(SEE NOTE 2)

HTMS-XX-S

-S

.006[.15]

POST DIM = {(C + .150) - B} REF

.100

REF

2.54

90°

2°

4°

(TYP)

.05 1.3

(MEASURE AT BEND RADIUS)

.050

(TYP)

1.27

MAX SWAY

(EITHER DIRECTION)

R.028 [.71] REF

SEE NOTE 8

(SEE NOTE 8)

HTMS-50-D

-D

.006[.15]

SHEET OF

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DECIMALS ANGLES

.XX:

.01 [.3] 2

.XXX:

.005 [.13]

.XXXX:

.0020 [.051]

MATERIAL:

BOARD SPACING SM MICRO STRIPS

BY:

HDWM-XX-XX-XX-X-XXX-SM-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

BRYAN T

07/09/1992

SHEET SCALE: 3:1

INSULATOR: LCP, UL 94 VO, COLOR: BLACK

TERMINAL: PHOS BRONZE

c:\enterprisevault\DWG\MISC\MKTG\HDWM-XX-XX-XX-X-XXX-SM-XXX-MKT.SLDDRW

NOTES:

1. REPRESENTS A CRITICAL DIMENSION.

2. MAXIMUM COPLANARITY: .006[.15].

3. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO POSTS: .010[.25].

4. MINIMUM PUSHOUT FORCE: 2 LB.

5. TUBE POSITIONS -07 THRU -50 ONLY; POSITIONS -01 THRU -06 TO BE LAYER PACKAGED.

6. MAXIMUM CUT FLASH: .010[.25].

7. MAXIMUM BURR ALLOWANCE: .003[.08] MAX.

8. USE DWM-50-D WHEN RAN ON BOARD STACKER AUTOMATION, USE HTMS-50-D FOR HAND FILL

AND SINGLE BODY AUTOMATION.

9. MINIMUM BOARD SPACE: .250[6.35].

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail: info@SAMTEC.com code: 55322

REVISION AV

"C"

.050

(TYP)

1.27

CONTACT AREA

-D

IN-PROCESS

"C"

.050

(TYP)

1.27

CONTACT AREA

-S

.090 2.29 .040

REF

1.02

.0430

REF

1.092

SM-A8H

(No OF POS - 2) X .0500 [1.270]

FIG 2

-A OPTION: STAKED ALIGNMENT PIN

(6 POSITIONS MINIMUM)

[BODY SPEC -D ONLY]

HDWM-10-57-XX-X-400-SM-A SHOWN

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

(No OF POS - 2) X .0500 [1.270]

FIG 3

-LC OPTION: STAKED LOCKING CLIP

(5 POSITIONS MINIMUM)

[BODY SPEC -D ONLY]

HDWM-10-57-XX-X-400-SM-LC SHOWN

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

.105 2.67

LC-05-TM

.270 6.86

REF

.400 10.16

REF

"N"

"Q"

.100 2.54

MIN

SINGLE ROW

.160 4.06

REF

PPP-07

.390 9.91

REF

"N"

"Q"

.270 6.86

REF

.100 2.54

MIN

DOUBLE ROW

FIG 4

.250 6.35

REF

PPP-06

-P OPTION: PICK & PLACE PAD

(MIN POST HEIGHT .100 [2.54])

"N" = USE MEASURED DIMENSION

FOR DOUBLE ROW: "Q" = {("N" - .390 [9.91]) /2}

.020 [.51]

FOR SINGLE ROW: "Q" = {("N" - .400 [10.16]) /2}

.020 [.51]

HDWM-10-57-XX-X-400-SM-P SHOWN

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

SHEET OF

BOARD SPACING SM MICRO STRIPS

BY:

HDWM-XX-XX-XX-X-XXX-SM-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

BRYAN T

07/09/1992

SHEET SCALE: 3:1

REVISION AV

c:\enterprisevault\DWG\MISC\MKTG\HDWM-XX-XX-XX-X-XXX-SM-XXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail: info@SAMTEC.com code: 55322

PT-1-24-01-48

-S: SINGLE

LEAD STYLES -01, -53, -54,

-55, -56, -57, -58, -59

PT-1-24-04-44

-D: DOUBLE

LEAD STYLES -54, -55,-56, -57, -58

PT-1-24-02-44

-53-D-SM: DOUBLE

PT-1-24-03-15

-01-D-250-SM: DOUBLE

PT-1-24-05-44

ALL -59-D, ALL -P

ALL TUBES WORK FOR THE ALIGNMENT PIN OPTION.

SHEET OF

BOARD SPACING SM MICRO STRIPS

BY:

HDWM-XX-XX-XX-X-XXX-SM-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

BRYAN T

07/09/1992

SHEET SCALE: 3:1

REVISION AV

c:\enterprisevault\DWG\MISC\MKTG\HDWM-XX-XX-XX-X-XXX-SM-XXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail: info@SAMTEC.com code: 55322