Standard 26-28 AWG: WTB INTERCONNECT 00-9175 The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive levels of shock, vibration, and temperature cycling to prove their reliability and robustness. The simplicity of inserting a wire into the connector with a small tool allows a wide range of devices to be connected to the PCB without soldering. In SSL applications specifically, these connectors are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the housing has been designed to grab the insulation of the wire to provide a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replace up to three times. The 9175 series accepts 26 AWG to 28 AWG wires with an insulation diameter ranging from 0.7mm to 1.0mm. These single contact connectors support a 1 amp current rating and have a split SMT tail design to provide maximum stability on the PCB. Available in a 2p and 3p configuration, these connectors can be end stackable for higher pin counts. APPLICATIONS FEATURES AND BENEFITS * Connecting discrete wire components directly to the PCB * Bringing power and signals onto a PCB * Daisy chaining PCB's together to create a continuous string of boards * Application Notes: refer to 201-01-124 * * * * * * IDC contact provides a gas-tight connection to the PCB for long term reliability Connector housing captures the wire insulation for positive strain relief Tested to automotive levels on shock, vibration and temperature cycling for reliability Low and high volume assembly tools to match production volumes Reduced total applied cost versus solder or crimp processes High temperature insulator capable to 260 degrees C reflow soldering processes ELECTRICAL ENVIRONMENTAL MECHANICAL * Current Rating: 1 Amp / Contact * Voltage Rating: 150 VAC * Operating Temperature: -40C to +125C * * * * Insulator Material: Nylon 46: UL94V0 Contact Material: Phosphor Bronze Plating: Tin over Nickel Durability: 3 Cycles HOW TO ORDER 00 9175 00X 001 Prefix Series Number of Ways Wire Gauge Size No of Code Ways Details 002 2 Page 2 003 3 Page 3 Code 001 Accepted Wire Wire Gauge Insulation 28 Gauge Solid or Stranded Min O 0.70 26 Gauge Solid or Stranded Max O 1.00 X 06 Insulator Color Plating Option 06 = Pure Tin all over 9 = UL White 8 = UL Black Special Order CONNECTOR/TOOLING PART NUMBER MATRIX AWG 26 26 26 26 28 28 28 28 SERIES 9175 IDC HAND INSERTION TOOLING* ACCESSORY CAPS Wire Plastic Metal Mass Positions Color Part Number Though Wire Wire Stop Insulation (medium volume) (high volume) Termination O 0.7 - 1.0 2p White 009175002001906 069175701601000 069175701701000 069175701701002 609175002010100 609175002010199 O 0.7 - 1.0 2p Black 009175002001806 069175701601000 069175701701000 069175701701002 609175002010000 609175002010099 O 0.7 - 1.0 3p White 009175003001906 069175701601000 069175701701000 069175701701003 609175003010100 609175003010199 O 0.7 - 1.0 3p Black 009175003001806 069175701601000 069175701701000 069175701701003 609175003010000 609175003010099 O 0.7 - 1.0 2p White 009175002001906 069175701601000 069175701701000 069175701701002 609175002010100 609175002010199 O 0.7 - 1.0 2p Black 009175002001806 069175701601000 069175701701000 069175701701002 609175002010000 609175002010099 O 0.7 - 1.0 3p White 009175003001906 069175701601000 069175701701000 069175701701003 609175003010100 609175003010199 O 0.7 - 1.0 3p Black 009175003001806 069175701601000 069175701701000 069175701701003 609175003010000 609175003010099 * Hand Insertion Tooling - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124 Certification: UL File #E90723 1 Standard 26-28 AWG: WTB INTERCONNECT 00-9175 26-28 AWG 2 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46. COLOR REFER TO PAGE 1. 3. CONNECTOR DESIGNED TO ACCEPT 26 AND 28 GAUGE SOLID OR STRANDED WIRE. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-100. SMT PCB LAYOUT PURE TIN PADS PACKING DETAILS REEL QTY LEADER TRAILER REEL / BOX PACK QTY 2 2000 500MM 500MM 7 14000 Standard 26-28 AWG: WTB INTERCONNECT 00-9175 26-28 AWG 3 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46. COLOR REFER TO PAGE 1. 3. CONNECTOR DESIGNED TO ACCEPT 26 AND 28 GAUGE SOLID OR STRANDED WIRE. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-100. SMT PCB LAYOUT PURE TIN PADS PACKING DETAILS REEL QTY LEADER TRAILER REEL / BOX PACK QTY 2000 500MM 500MM 7 14000 3 Standard 26-28 AWG: WTB 00-9175 INTERCONNECT 60-9175-00X-010-X00 ACCESSORY CAP - THROUGH WIRE NOTES: 1. CAP FOR IDC WIRE TO BOARD CONNECTION, 2 AND 3 WAY, THROUGH WIRE. 2. THROUGH WIRE CAP CAN BE USED AT ANY POSTION ALONG A WIRE. 3. FOR USE WITH STANDARD 9175 IDC CONNECTORS 4. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS SEE PAGE 1. 5. CAPS DESIGNED TO ACCOMMODATE WIRES WITH INSULATION UP TO 1.00MM DIAMETERS. 6. GENERAL TOLERANCE 0.20. 7. PACKED IN BAGS, 1000 PIECES PER BAG. 4 Standard 26-28 AWG: WTB 00-9175 INTERCONNECT 60-9175-00X-0XX-010-X99 ACCESSORY CAP - WIRE STOP NOTES: 1. CAP FOR IDC WIRE TO BOARD CONNECTION, 2 AND 3 WAY, WIRE STOP. 2. WIRE STOP CAP FOR USE AT WIRE ENDS, STOP FACE PROTECTS THE WIRE ENDS. 3. FOR USE WITH STANDARD 9175 IDC CONNECTORS 4. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS SEE PAGE 1. 5. CAPS DESIGNED TO ACCOMMODATE WIRES WITH INSULATION UP TO 1.00MM DIAMETERS. 6. GENERAL TOLERANCE 0.20. 7. PACKED IN BAGS, 1000 PIECES PER BAG. 5 Standard 26-28 AWG: WTB INTERCONNECT 00-9175 HAND INSERTION TOOLING SINGLE WIRE INSERTION TOOL FOR 26/28 GAUGE WIRE UNIVERSAL HANDLE Details Tool Part Number 6.35 A/F HEX BIT HOLDER 06 7000 7730 01 000 METAL SHANK ALL METAL HIGH PRODUCTION PLASTIC MEDIUM PRODUCTION Metal Metal/Plastic Max Tool Insulation Part Number Dia 1.00 06 9175 7017 01 000 Max Tool Insulation Part Number Dia 1.00 06 9175 7016 01 000 CLEARANCE AREA ON PCB FOR HAND TOOLING 2 WAY 3 WAY 6 Standard 26-28 AWG: WTB INTERCONNECT 00-9175 INSERTION TOOLING REQUIRES HAND PRESS WITH FLAT ROCK PLATES 2 WAY TOOL TOOL NUMBER 06-9175-7017-01-002 SKETCH SHOWS PCB RESTRICTED AREAS FOR ASSEMBLY TOOLING NOTES: 1. DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS. 2. MAXIMUM COMPONENT HEIGHT 0.80MM IN THIS AREA. 3. MAXIMUM COMPONENT HEIGHT 4.00MM IN THIS AREA. 4. THE SAME RESTRICTIONS APPLY TO ALL WIRE INSULATION DIAMETERS. 3 WAY TOOL TOOL NUMBER 06-9175-7017-01-003 SKETCH SHOWS PCB RESTRICTED AREAS FOR ASSEMBLY TOOLING 7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: AVX: 609175002010199 609175003010199 609175003010100 609175003010000 609175002010000 609175002010100