1
CONNECT
INTER
Standard 26-28 AWG: WTB
00-9175
The 917X series of surface mount Insulation Displacement Connectors (IDC) were
developed to meet the harsh automotive and industrial market applications for
connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This
industry proven contact system has been tested to automotive levels of shock, vibration,
and temperature cycling to prove their reliability and robustness. The simplicity of
inserting a wire into the connector with a small tool allows a wide range of devices to be
connected to the PCB without soldering. In SSL applications specifically, these
connectors are used to bring power and signal onto the PCB or are used to daisy chain
multiple boards together in a long string. While the IDC contact provides a gas-tight
connection to conductor of the wire, the housing has been designed to grab the
insulation of the wire to provide a positive strain relief even in the harshest conditions. In
case of repair, the wires can be removed and replace up to three times.
The 9175 series accepts 26 AWG to 28 AWG wires with an insulation diameter ranging
from 0.7mm to 1.0mm. These single contact connectors support a 1 amp current rating
and have a split SMT tail design to provide maximum stability on the PCB. Available in a
2p and 3p configuration, these connectors can be end stackable for higher pin counts.
ELECTRICAL
• Current Rating: 1 Amp / Contact
• Voltage Rating: 150 VAC
9175
Series
00
Prefix
00X
Number of Ways
06
Plating
Option
06 = Pure Tin
all over
HOW TO ORDER
001
Wire Gauge Size
ENVIRONMENTAL
• Operating Temperature:
-40ºC to +125ºC
MECHANICAL
• Insulator Material: Nylon 46: UL94V0
• Contact Material: Phosphor Bronze
• Plating: Tin over Nickel
• Durability: 3 Cycles
FEATURES AND BENEFITS
• IDC contact provides a gas-tight connection to the PCB for long term reliability
• Connector housing captures the wire insulation for positive strain relief
• Tested to automotive levels on shock, vibration and temperature cycling for reliability
• Low and high volume assembly tools to match production volumes
• Reduced total applied cost versus solder or crimp processes
• High temperature insulator capable to 260 degrees C reflow soldering processes
APPLICATIONS
• Connecting discrete wire components
directly to the PCB
• Bringing power and signals onto a PCB
• Daisy chaining PCB’s together to create
a continuous string of boards
• Application Notes: refer to 201-01-124
Code No of Details
Ways
002 2 Page 2
003 3 Page 3
Code Accepted Wire
Wire Gauge Insulation
001 28 Gauge Solid or Stranded Min Ø 0.70
26 Gauge Solid or Stranded Max Ø 1.00
Certification: UL File #E90723
CONNECTOR/TOOLING PART NUMBER MATRIX
SERIES 9175 IDC HAND INSERTION TOOLING* ACCESSORY CAPS
AWG Wire Positions Color Part Number Plastic Metal Mass Though Wire Wire Stop
Insulation (medium volume) (high volume) Termination
26 Ø 0.7 - 1.0 2p White 009175002001906 069175701601000 069175701701000 069175701701002 609175002010100 609175002010199
26 Ø 0.7 - 1.0 2p Black 009175002001806 069175701601000 069175701701000 069175701701002 609175002010000 609175002010099
26 Ø 0.7 - 1.0 3p White 009175003001906 069175701601000 069175701701000 069175701701003 609175003010100 609175003010199
26 Ø 0.7 - 1.0 3p Black 009175003001806 069175701601000 069175701701000 069175701701003 609175003010000 609175003010099
28 Ø 0.7 - 1.0 2p White 009175002001906 069175701601000 069175701701000 069175701701002 609175002010100 609175002010199
28 Ø 0.7 - 1.0 2p Black 009175002001806 069175701601000 069175701701000 069175701701002 609175002010000 609175002010099
28 Ø 0.7 - 1.0 3p White 009175003001906 069175701601000 069175701701000 069175701701003 609175003010100 609175003010199
28 Ø 0.7 - 1.0 3p Black 009175003001806 069175701601000 069175701701000 069175701701003 609175003010000 609175003010099
* Hand Insertion Tooling - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124
CONNECT
INTER
X
Insulator Color
9 = UL White
8 = UL Black
Special Order
2
CONNECT
INTER
Standard 26-28 AWG: WTB
00-9175
26-28 AWG 2 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHOR BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 1.
3. CONNECTOR DESIGNED TO ACCEPT 26 AND 28 GAUGE SOLID OR
STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-100.
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY 2000
LEADER 500MM
TRAILER 500MM
REEL / BOX 7
PACK QTY 14000
CONNECT
INTER
3
CONNECT
INTER
Standard 26-28 AWG: WTB
00-9175
26-28 AWG 3 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHOR BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 1.
3. CONNECTOR DESIGNED TO ACCEPT 26 AND 28 GAUGE SOLID OR
STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-100.
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY 2000
LEADER 500MM
TRAILER 500MM
REEL / BOX 7
PACK QTY 14000
CONNECT
INTER
4
CONNECT
INTER
Standard 26-28 AWG: WTB
00-9175
CONNECT
INTER
NOTES:
1. CAP FOR IDC WIRE TO BOARD CONNECTION, 2 AND 3 WAY, THROUGH WIRE.
2. THROUGH WIRE CAP CAN BE USED AT ANY POSTION ALONG A WIRE.
3. FOR USE WITH STANDARD 9175 IDC CONNECTORS
4. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS SEE PAGE 1.
5. CAPS DESIGNED TO ACCOMMODATE WIRES WITH INSULATION UP TO 1.00MM DIAMETERS.
6. GENERAL TOLERANCE ±0.20.
7. PACKED IN BAGS, 1000 PIECES PER BAG.
60-9175-00X-010-X00
ACCESSORY CAP – THROUGH WIRE
5
CONNECT
INTER
Standard 26-28 AWG: WTB
00-9175
CONNECT
INTER
NOTES:
1. CAP FOR IDC WIRE TO BOARD CONNECTION, 2 AND 3 WAY, WIRE STOP.
2. WIRE STOP CAP FOR USE AT WIRE ENDS, STOP FACE PROTECTS THE WIRE ENDS.
3. FOR USE WITH STANDARD 9175 IDC CONNECTORS
4. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS SEE PAGE 1.
5. CAPS DESIGNED TO ACCOMMODATE WIRES WITH INSULATION UP TO 1.00MM DIAMETERS.
6. GENERAL TOLERANCE ±0.20.
7. PACKED IN BAGS, 1000 PIECES PER BAG.
60-9175-00X-0XX-010-X99
ACCESSORY CAP – WIRE STOP
6
CONNECT
INTER
Standard 26-28 AWG: WTB
00-9175
HAND INSERTION TOOLING
SINGLE WIRE INSERTION TOOL FOR 26/28 GAUGE WIRE
CLEARANCE AREA ON PCB FOR HAND TOOLING
HIGH PRODUCTION
Metal
ALL METAL
Max Tool
Insulation Part Number
Dia
1.00 06 9175 7017 01 000
MEDIUM PRODUCTION
Metal/Plastic
METAL SHANK
PLASTIC
Max Tool
Insulation Part Number
Dia
1.00 06 9175 7016 01 000
UNIVERSAL HANDLE
Details Tool
Part Number
6.35 A/F HEX 06 7000 7730 01 000
BIT HOLDER
2 WAY 3 WAY
CONNECT
INTER
7
CONNECT
INTER
CONNECT
INTER
Standard 26-28 AWG: WTB
00-9175
INSERTION TOOLING
REQUIRES HAND PRESS WITH FLAT ROCK PLATES
2 WAY TOOL
TOOL NUMBER 06-9175-7017-01-002
SKETCH SHOWS PCB RESTRICTED AREAS FOR ASSEMBLY TOOLING
3 WAY TOOL
TOOL NUMBER 06-9175-7017-01-003
SKETCH SHOWS PCB RESTRICTED AREAS FOR ASSEMBLY TOOLING
NOTES:
1. DIMENSIONS SHOWN ARE
REFERENCE DIMENSIONS.
2. MAXIMUM COMPONENT
HEIGHT 0.80MM IN THIS AREA.
3. MAXIMUM COMPONENT
HEIGHT 4.00MM IN THIS AREA.
4. THE SAME RESTRICTIONS
APPLY TO ALL WIRE
INSULATION DIAMETERS.
