DC/DC Converters TEN 40WIN Series, 40 Watt CB Features Highest power density: Scheme 40 W in 1" x 2" x 0.4" package Ultra wide 4:1 input range Excellent efficiency up to 90 % Output voltage adjustable Remote On/Off Protection against short circuit and over voltage I/O isolation 1500 VDC Operating temperature range -40C to +75C The TEN 40WIN Series is a new range of isolated high performance DC/DC-converter modules. Due to the very high efficiency of up to 90% these 40 W converters come with a footprint of only 1.0" x 2.0". The 12 models have an ultra wide 4:1 input voltage range and a tight output voltage regulation. The output voltage is adjustable by external resistor. Remote On/Off and protection against overpower and over voltage are standard features of these converters. Typical applications are in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is limited. 3-year product warranty Models Order code Output voltage Output current max. Efficiency TEN 40-2410WIN 3.3 VDC 8`000 mA 89 % TEN 40-2411WIN 5.0 VDC 8'000 mA 90 % 12 VDC 3`330 mA 89 % 15 VDC 2`670 mA 89 % 24 VDC 1`670 mA 91 % TEN 40-2422WIN 12 VDC 1'670 mA 88 % TEN 40-2423WIN 15 VDC 1`330 mA 88 % TEN 40-4810WIN 3.3 VDC 8`000 mA 89 % TEN 40-4811WIN 5.0 VDC 8'000 mA 90 % 12 VDC 3`330 mA 90 % 15 VDC 2`670 mA 90 % TEN 40-2412WIN TEN 40-2413WIN TEN 40-2415WIN TEN 40-4812WIN TEN 40-4813WIN TEN 40-4815WIN Input voltage range 9 - 36 VDC (nominal 24 VDC) 18 - 75 VDC (nominal 48 VDC) 24 VDC 1`670 mA 89 % TEN 40-4822WIN 12 VDC 1'670 mA 88 % TEN 40-4823WIN 15 VDC 1`330 mA 88 % http://www.tracopower.com Page 1 of 4 DC/DC Converters TEN 40WIN Series 40 Watt Input Specifications Input current at no load (nominal input voltage) 24 24 24 24 48 48 48 48 Vin; Vin; Vin; Vin; Vin; Vin; Vin; Vin; 3.3 & 5.0 VDC models: 12 VDC models: 15 & 24 VDC models: dual output models: 3.3 & 5.0 VDC models: 12 & 15 VDC models: 24 VDC models: dual output models: 90 mA typ. 95 mA typ. 105 mA typ. / 115 mA typ. 65 mA typ. 55 mA typ. 60 mA typ. / 65 mA typ. 75 mA typ. 45 mA typ. Surge voltage (100 msec. max.) 24 V models: 50 V max. 48 V models: 100 V max. Reflected input ripple current 24 V models: 30 mA typ. 48 V models: 20 mA typ. Conducted noise (input) EN 55022 level A, FCC part 15, level A with external capacitor see: application note Start-up voltage / under voltage shut down 24 V models: 9 VDC / 8.3 VDC (or lower) 48 V models: 18 VDC / 16.5 VDC (or lower) Recommended input fuse (slow blow) 24 V models: 8000 mA 48 V models: 4000 mA Output Specifications Voltage set accuracy single output models: 1.0 % dual output models (balanced load): 2.0 % Output voltage adjustment range 10 % with external resistor (see page 3) Regulation - Input variation Vin min. to Vin max. 0.5 % max. - Load variation single output models (0 - 100%): 0.5 % max. dual output models (9 - 100%): 1.0 % max. Minimum load single output models: dual output models: 0% 9 % of rated max current (operation at lower load condition will not damage the converters. However, they may not meet all listed specifications) Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) with external capacitors 1 F M/C 10 F T/C 3.3 & 5.0 VDC models: 100 mVpk-pk. typ. other models: 150 mVpk-pk typ. Transient response (25 % load step change) 250 s typ. Short circuit protection hiccup mode, indefinite (automatic recovery) Over power protection at 150 % Over voltage protection at 120 % of Vout nom. typ. Capacitive load 3.3 5.0 12.0 15.0 24.0 12.0 15.0 VDC VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: models: 21'000 F max. 13'600 F max. 2'400 F max. 1'500 F max. 600 F max. 1'200 F max. (each output) 750 F max. (each output) Application note: www.tracopower.com/overview/ten40win All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TEN 40WIN Series 40 Watt Output Voltage Adjustment Single output models only (open = nominal output voltage) Trim up Trim down Trim +Vout Rd Ru Trim - Vout Ru [kOhm]* output +5% +10% 3.3V 7.34 0.65 Rd [kOhm]* 5V 12V 15V 12.30 41.40 50.15 0.48 2.70 3.58 24V 27.38 0.34 output -5% -10% 3.3V 8.51 0.50 5V 12V 15V 24V 16.53 47.15 63.35 38.04 1.24 1.35 4.92 1.12 *approximate values General Specifications Temperature ranges - Operating (natural convection cooling 20 LFM) -40C to +75C (see load derating) - Case temperature +105C max. - Storage -50C to +125C Load derating - without heatsink - with heatsink 2.5 %/K above 55C 2.5 %/K above 65C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) 330'000 h Isolation voltage (60 sec.) - Input/Output 1500 VDC Isolation capacitance - Input/Output 1500 pF typ Isolation resistance - Input/Output >1000 Mohm Switching frequency (fixed) 320 kHz typ. (pulse width modulation PWM) Safety standards CAN/CSA-C22.2 No 60950-1-07 Incl. AM1 (2011) ANSI/UL Std No 60950-1, 2nd Ed. Incl. AM1 (2011) IEC 60950-1:2005 (2nd Edition); +A1:2009 - Certification documents www.tracopower.com/overview/ten40win Remote On/Off - On: 4.7 to 12 VDC or open circuit. - Off: 0 to +1.2 VDC or short circuit pin 3 and pin 2 - Off idle current: 2.5 mA max. Physical Specifications Casing material aluminum black anodized Potting material epoxy (UL 94V-0 rated) Weight 30 g (1.05 oz) Soldering temperature max. 260C / 10 sec. Environmental compliance - Reach www.tracopower.com/products/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TEN 40WIN Series 40 Watt (0.4) (0.1) 3 (0.8) 5 20.32 Bottom View 6 Pin-Out 25.4 (1.0) 2.54 4 10.16 7.62 (2.0) 1 2 (0.3) 17.78 (0.7) 2.54 50.8 (0.1) Outline Dimensions Dual 1 +Vin (Vcc) +Vin (Vcc) 2 -Vin (GND) -Vin (GND) Remote On/Off 4 +Vout +Vout 5 -Vout Common 6 Trim -Vout Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.04 0.002) Pin pitch tolerance: 0.25 (0.01) Case tolerances: 0.25 (0.01) (0.22) h 5.5 h= 11.0 (0.43) for 24 VDC output models 10.2 (0.40) for other models Single 3 2.54 (0.1) 45.72 (1.8) Pin Heat-sink (optional) Heat-sink Thermal pad Clamp Converter 31.1 (1.22) 31.0 (1.22) max. H H = 18.0 ( 0.71) for 24 VDC output model with TEN-HS6 H = 17.2 (0.68) for other models with TEN-HS4 Order code: TEN HS6 for 24 VDC output models TEN-HS4 for other models (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 9 g (0.32oz) without converter Thermal impedance after assembling: 10 K/W Note: Before attaching the heatsink, the product label on converter has to be removed for optimal performance. For volume orders we can supply the converters with heatsink already mounted. Please contact us for a relative quotation. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. February 27. 2018 Page 4 of 4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: TEN 40-4815WIN TEN 40-4812WIN TEN 40-2412WIN TEN 40-4810WIN TEN 40-2411WIN TEN 40-2410WIN TEN 40-4823WIN TEN 40-4811WIN TEN 40-2422WIN TEN 40-4822WIN TEN 40-2413WIN TEN 40-4813WIN TEN 40-2415WIN TEN 40-2423WIN