CXE-1089Z CXE-1089Z 50MHz to 1200MHz 75 pHEMT MMIC LNA 50MHz to 1200MHz 75 pHEMT MMIC LNA Package: SOT-89 Product Description Features RFMD's CXE-1089Z is a high performance 75 pHEMT MMIC low-noise amplifier utilizing a Darlington configuration with active bias. The active bias network provides stable current over temperature and process threshold voltage variations. The CXE-1089Z amplifier operates linearly from +3.3VDC, +4.75VDC, or +5VDC power supplies. 15.0 GaAs HBT 14.0 GaAs MESFET 13.0 12.0 SiGe BiCMOS 11.0 Gain (dB) InGaP HBT Si BiCMOS SiGe HBT Gain and Return Loss versus Frequency, T=25C -5 -8 -14 -17 S22 10.0 -20 9.0 -23 GaAs pHEMT 8.0 -26 Si CMOS 7.0 Si BJT 6.0 GaN HEMT 5.0 -29 S11 -32 On-Chip Active Bias Network Applications CATV Set Top Box / Tuners CATV Drop Amplifiers Optical Rx/Tx FTTH Video Solutions -35 0.0 InP HBT -11 S21 Return Loss (dB) Optimum Technology Matching(R) Applied Flat Gain: 13dB+/-0.4dB, 50MHz to 1000MHz Excellent Return Loss: >15.5dB Low Distortion: CTB=-82dBc, CSO=-66dBc Operates from Single, Fixed +3.3VDC, +4.75VDC, or +5VDC Supply 200.0 400.0 600.0 800.0 1000.0 1200.0 Frequency (MHz) RF MEMS LDMOS Parameter Min. Specification Typ. Max. Unit Small Signal Gain Gain Flatness Output Power at 1dB Compression Output Third Order Intercept Point CSO 13.0 +/-0.4 18.5 38.5 -66.0 dB dB dBm dBm dBc CTB -82.0 dBc XMOD -78.0 dBc Condition 500MHz 50MHz to 1000MHz 500MHz 500MHz 55.25MHz to 745.25MHz, 110Ch, Flat Tilt, 15dBmV Input 55.25MHz to 745.25MHz, 110Ch, Flat Tilt, 15dBmV Input 55.25MHz to 745.25MHz, 110Ch, Flat Tilt, 15dBmV Input 50MHz to 1000MHz 50MHz to 1000MHz 500MHz Input Return Loss, Worst Case 16.5 dB Output Return Loss, Worst Case 15.5 dB Noise Figure 3.0 dB Device Operating Voltage 5.00 5.25 V Device Operating Current 110.0 mA Quiescent Thermal Resistance 57.5 C/W Junction-to-case Test Conditions: VD =5V, ID =110mA Typ, OIP3 Tone Spacing=1MHz, POUT per tone=8dBm, TL =25C, ZS =ZL =75, Tested with App Circuit RF MICRO DEVICES(R), RFMD(R), Optimum Technology Matching(R), Enabling Wireless ConnectivityTM, PowerStar(R), POLARISTM TOTAL RADIOTM and UltimateBlueTM are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. (c)2006, RF Micro Devices, Inc. DS100917 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 1 of 12 CXE-1089Z Parameter Min. Specification Typ. Small Signal Gain Gain Flatness Output Power at 1dB Compression Output Third Order Intercept Point CSO Max. Unit 12.9 +/-0.4 17.2 37.8 -61 dB dB dBm dBm dBc CTB -79 dBc Input Return Loss, Worst Case Output Return Loss, Worst Case Noise Figure Device Operating Voltage 16.4 17.5 2.9 4.75 dB dB dB VDC 4.9 Condition 500MHz 50MHz to 1000MHz 500MHz 500MHz 55.25MHz to 547.25MHz, 79Ch, NTSC, Flat Tilt, +15.5dBmV Input 55.25MHz to 547.25MHz, 79Ch, NTSC, Flat Tilt, +15.5dBmV Input 50MHz to 1000MHz, -40C to +85C 50MHz to 1000MHz, -40C to +85C 500MHz Device Operating Current 106 mA Test Conditions: VD=+4.75VDC, ID =106mA, Typ. OIP3 Tone Spacing=1MHz, POUT per tone=+8dBm T=+25C, ZS =ZI =75, Tested with +5VDC Applications Circuit Parameter Min. Specification Typ. Small Signal Gain Gain Flatness Output Power at 1dB Compression Output Third Order Intercept Point CSO Max. Unit 12.7 +/-0.4 14.2 35.4 -56 dB dB dBm dBm dBc CTB -78 dBc Input Return Loss, Worst Case Output Return Loss, Worst Case Noise Figure Device Operating Voltage 16.4 17.5 2.8 3.3 dB dB dB VDC 3.5 Quiescent Condition 500MHz 50MHz to 1000MHz 500MHz 500MHz 55.25MHz to 547.25MHz, 79Ch, NTSC, Flat Tilt, +15.5dBmV Input 55.25MHz to 547.25MHz, 79Ch, NTSC, Flat Tilt, +15.5dBmV Input 50MHz to 1000MHz, -40C to +85C 50MHz to 1000MHz, -40C to +85C 500MHz Device Operating Current 75 mA Test Conditions: VD=+3.3VDC, ID =75mA, Typ. OIP3 Tone Spacing=1MHz, POUT per tone=+8dBm T=+25C, ZS =ZI =75, Tested with +5VDC Applications Circuit Quiescent Absolute Maximum Ratings Rating Unit Device Current (ID) Parameter 125 mA Device Voltage (VD) 5.5 V Power Dissipation 690 mW RF Input Power* (See Note) 23 dBm +150 C Operating Temperature Range (TL) -40 to +85 C Storage Temperature Range -65 to +150 C Junction Temperature (TJ) ESD Rating - Human Body Model (HBM) Moisture Sensitivity Level Class 1A Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. MSL 2 *Note: Load condition, 10:1 VSWR Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias conditions should also satisfy the following expression: IDVD <(TJ -TL)/RTH, j-l TL =TLEAD 2 of 12 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS100917 CXE-1089Z Parameters Units Small Signal Gain Output Power at 1dB Compression Output Third Order Intercept Point Output Second Order Intercept Point Input Return Loss Reverse Isolation Output Return Loss Noise Figure Test Conditions: VD =5V ID =110mA Typ. TL =25C ZS =ZL =75 50 Frequency (MHz) 550 750 250 dB 13.5 13.2 13.1 dBm 16.6 17.2 18.6 dBm 37.5 38.5 38.5 dBm 63.5 64.5 62.5 dB -17.5 -27.5 -33.5 dB -17.5 -17.5 -17.5 dB -17.5 -16.5 -16.5 dB 3.5 2.5 2.5 OIP3, OIP2 Tone Spacing=1MHz, POUT per tone=8dBm Tested with App Circuit 13.0 18.9 37.5 60.5 -38.5 -17.5 -16.5 2.5 850 1050 12.8 19.1 37.5 55.5 -34.5 -17.5 -15.5 2.5 12.8 19.5 37.5 54.5 -25.5 -17.5 -15.5 2.5 Current versus Voltage (RBIAS=Open) 140.0 Device Current (mA) 120.0 100.0 80.0 60.0 40.0 -40C +25C +85C 20.0 0.0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Device Voltage (V) DS100917 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 3 of 12 CXE-1089Z Application Circuit Performance (VD =5V, ID =110mA, RBIAS =open) S11 versus Frequency S21 versus Frequency 0.0 18.0 -40C 25C 85C -5.0 16.0 S21 (dB) S11 (dB) -10.0 -15.0 14.0 12.0 -20.0 10.0 -25.0 -30.0 0.0 -40C 25C 85C 8.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 Frequency (GHz) S12 versus Frequency -5.0 -10.0 -10.0 S22 (dB) S12 (dB) 2.5 3.0 0.0 -5.0 -15.0 -20.0 -40C 25C 85C -15.0 -20.0 -25.0 -25.0 -40C 25C 85C -30.0 -30.0 0.5 1.0 1.5 Frequency (GHz) 4 of 12 2.0 S22 versus Frequency 0.0 0.0 1.5 Frequency (GHz) 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS100917 CXE-1089Z Application Circuit Performance (VD =5V, ID =110mA, RBIAS =open) NF versus Frequency P1dB versus Frequency 5.0 22.0 4.5 20.0 P1dB (dBm) NF (dB) 4.0 3.5 3.0 18.0 16.0 2.5 14.0 -40C 25C 85C 2.0 -40C 25C 85C 1.5 12.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0.0 0.2 0.4 Frequency (GHz) 0.6 0.8 1.0 1.2 Frequency (GHz) OIP2 (8dBm/tone, 1MHz spacing) OIP3 (8dBm/tone, 1MHz spacing) 80.0 44.0 75.0 70.0 42.0 40.0 OIP2 (dBm) OIP3 (dBm) 65.0 38.0 60.0 55.0 50.0 45.0 40.0 36.0 -40C 25C 85C 30.0 34.0 0.0 0.2 0.4 0.6 Frequency (GHz) DS100917 0.8 1.0 -40C 25C 85C 35.0 1.2 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Frequency (GHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 5 of 12 CXE-1089Z Composite Performance - Application Circuit: (VD =5V, ID =110mA, 110Ch. Flat Tilt, RBIAS =Open) XMOD , +15dBmV Input, 110 Ch CTB , +15dBmV Input, 110 Ch 100 100 95 95 90 90 85 85 80 80 XMOD 75 (dBc) CTB (dBc) 75 70 70 65 65 60 60 -40C +25C 55 -40C +25C 55 +85C +85C 50 50 0 100 200 300 400 500 600 700 800 0 100 200 300 Frequency (MHz) -CSO, +15dBmV Input, 110 Ch 400 Frequency (MHz) 500 600 700 800 +CSO, +15dBmV Input, 110 Ch 100 100 95 95 90 90 85 85 -40C +25C +85C -CSO (dBc) 80 80 75 +CSO 75 (dBc) 70 70 65 65 60 60 -40C +25C 55 55 +85C 50 50 0 100 200 300 400 Frequency (MHz) 6 of 12 500 600 700 800 0 100 200 300 400 500 600 700 800 Frequency (MHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS100917 CXE-1089Z Application Circuit Performance versus Device Current (varying RBIAS) VD =5.0V, T=+25C S11 versus Frequency S21 versus Frequency 0.0 18.0 17.0 -5.0 16.0 15.0 S21 (dB) S11 (dB) -10.0 -15.0 -20.0 14.0 13.0 12.0 11.0 80mA 90mA 100mA -25.0 10.0 80mA 90mA 100mA 9.0 -30.0 8.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 Frequency (GHz) 2.0 2.5 3.0 S22 versus Frequency S12 versus Frequency 0.0 0.0 -5.0 -5.0 -10.0 S22 (dB) -10.0 S12 (dB) 1.5 Frequency (GHz) -15.0 -15.0 -20.0 -20.0 -25.0 80mA 90mA 100mA -25.0 80mA 90mA 100mA -30.0 -30.0 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) DS100917 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 7 of 12 CXE-1089Z Application Circuit Performance versus Device Current (RBIAS) VD =5.0V, T=+25C NF versus Frequency P1dB versus Frequency 23.0 5.0 22.0 4.5 21.0 20.0 P1dB (dBm) NF (dB) 4.0 3.5 3.0 19.0 18.0 17.0 16.0 2.5 15.0 80mA 90mA 100mA 2.0 80mA 90mA 100mA 14.0 13.0 1.5 0.0 0.2 0.4 0.6 0.8 1.0 0.0 1.2 0.2 0.4 0.6 0.8 1.0 1.2 Frequency (GHz) Frequency (GHz) OIP3 versus Frequency (8dBm/tone, 1MHz spacing) OIP2 versus Frequency (8dBm/tone, 1MHz spacing) 45.0 75.0 43.0 70.0 41.0 65.0 37.0 OIP2 (dBm) OIP3 (dBm) 39.0 35.0 33.0 60.0 55.0 50.0 31.0 45.0 29.0 80mA 90mA 100mA 27.0 25.0 0.0 35.0 0.2 0.4 0.6 Frequency (GHz) 8 of 12 80mA 90mA 100mA 40.0 0.8 1.0 1.2 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Frequency (GHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS100917 CXE-1089Z Application Circuit Performance versus Device Current (RBIAS) VD =5.0V, T=+25C XMOD , +15dBmV Input, 110 Ch CTB , +15dBmV Input, 110 Ch 100 100 95 95 90 90 85 85 80 80 XMOD 75 (dBc) CTB (dBc) 75 70 70 65 65 60 60 80mA 90mA 55 80mA 90mA 55 100mA 50 100mA 50 0 100 200 300 400 500 600 700 800 0 100 200 300 Frequency (MHz) -CSO, +15dBmV Input, 110 Ch -CSO (dBc) 400 Frequency (MHz) 500 600 700 800 +CSO, +15dBmV Input, 110 Ch 100 100 95 95 90 90 85 85 80 80 75 +CSO 75 (dBc) 70 70 65 65 60 60 80mA 90mA 55 80mA 90mA 55 100mA 100mA 50 50 0 100 200 300 400 Frequency (MHz) DS100917 500 600 700 800 0 100 200 300 400 500 600 700 800 Frequency (MHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 9 of 12 CXE-1089Z Application Schematic V+ C1 C2 L1 C3 RF IN RF OUT CXE-1089Z C4 *RBIAS Application Circuit Element Values Reference Designator Frequency (MHz) 50 to 1200 F-connectors C1, C3, C4 1000pF 0603 size C2 100pF 0603 size L1 1.2uH 1008LS size See table below *RBIAS *Optional shunt resistor can be used to lower device current. Performance degradation may occur. RBIAS Device Current (VD =5.0V) 1.3k 2.4k 4.7k open 80mA 90mA 100mA 110mA Evaluation Board Layout and Bill of Materials HDR2 HDR1 J1 J2 U1 Mounting Instructions 1. Solder the copper pad on the backside of the device package to the ground plane. 2. Use a large ground pad area with many plated through-holes as shown. 3. We recommend 1 or 2 ounce copper. Measurements for this data sheet were made on a 31mil thick GTEK board with 1 ounce copper on both sides. 10 of 12 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS100917 CXE-1089Z Pin 1 2, 4 3 Function Description RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RFIN Connection to ground. Use via holes as close as possible to the ground leads to minimize inductance. GND output and bias pin. DC voltage is present on this pin, therefore a DC blocking capacitor is necessary for proper operRFOUT/BIAS RF ation. Package Marking 4 CX1Z Alternate marking "CXE1089Z" on line one with Trace Code on line two. Recommended Land Pattern Drawings Dimensions shown in inches [mm] Package Drawing Dimensions in inches (millimeters) Refer to drawing posted at www.rfmd.com for tolerances. DS100917 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 11 of 12 CXE-1089Z Ordering Information 12 of 12 Part Number Description Reel Size Devices/Reel CXE-1089ZSB CXE-1089ZSQ CXE-1089ZSR CXE-1089Z CXE1089PCK-EVB1 5pcs Sample Bag 25pcs Sample Bag 50MHz to 1200MHz 75 pHEMT MMIC LNA 50MHz to 1200MHz 75 pHEMT MMIC LNA 75 Evaluation Board & 5 Loose Pieces N/A N/A 7" 7" N/A N/A N/A 100pcs 1000pcs N/A 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS100917