LITE-ON SEMICONDUCTOR MBR1630 thru 1660 REVERSE VOLTAGE - 30 to 60 Volts FORWARD CURRENT - 16 Amperes SCHOTTKY BARRIER RECTIFIERS TO-220AC FEATURES Metal of silicon rectifier,majority carrier conducton Guard ring for transient protection Low power loss, high efficiency High current capability, low VF High surge capacity Plastic package has UL flammability classification 94V-0 For use in low voltage,high frequency inverters,free whelling,and polarity protection applications B L M C D A K E PIN 1 2 DIM. A B C D E F F G I J MECHANICAL DATA H Case : TO-220AC molded plastic Polarity : As marked on the body Weight : 0.08 ounces, 2.24 grams Mounting position : any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) N G H I J K L M PIN 1 CASE PIN 2 TO-220AC MIN. MAX. 14.22 15.88 10.67 9.65 3.43 2.54 5.84 8.26 12.70 4.83 0.51 0.30 3.53 3.56 6.86 9.28 6.35 14.73 5.33 1.14 0.64 4.09 4.83 1.14 1.40 2.92 2.03 N All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL MBR1630 MBR1635 MBR1640 MBR1645 MBR1650 MBR1660 CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage VRRM VRMS VDC 30 21 30 35 24.5 35 40 28 40 45 31.5 45 50 35 50 60 42 60 UNIT V V V Maximum Average Forward Rectified Current (See Fig.1) I(AV) 16 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 150 A Voltage Rate of Change (Rated VR) dv/dt Maximum Forward Voltage (Note 1) IF =16A @ TJ =25 C IF =16A @ TJ =125 C Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ =25 C @TJ =125 C Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 3) Operating Temperature Range Storage Temperature Range VF IR R0JC CJ 10000 1000 0.63 0.75 V 0.57 0.65 V 0.2 1 40 50 1.5 3 V/us mA C/W 450 pF TJ -55 to +150 C TSTG -55 to +175 C NOTES : 1. 300us Pulse width , 2% duty cycle. 2. Device mounted on 150*150*3mm copper plate. 3. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. REV.54, Aug-2007, KTHA10 RATING AND CHARACTERISTIC CURVES MBR1630 thru MBR1660 DC Square wave 16 MBR1650~1660 MBR1630~1645 MBR1650~1660 MBR1630~1645 12 T 8 RESISTIVE OR INDUCTIVE LOAD 4 tp/T=50% R jc = 1.5 C/W tp 0 25 50 75 100 125 150 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 20 150 100 175 50 8.3ms Single Half-Sine-Wave 0 1 2 5 CASE TEMPERATURE , C FIG.3 - TYPICAL REVERSE CHARACTERISTICS 50 100 FIG.4 - TYPICAL FORWARD CHARACTERISTICS 1000 INSTANTANEOUS FORWARD CURRENT ,(A) 100 100 TJ = 100 C 10 1.0 TJ = 75 C 0.1 10 MBR1630 ~ MBR1645 MBR1650 ~ MBR1660 1.0 TJ = 25 C TJ = 25 C 0.01 PULSE WIDTH 300us 2% Duty cycle 0.1 0 20 40 60 80 100 120 140 0.1 0.2 0.3 0.4 FIG.5 - TYPICAL JUNCTION CAPACITANCE 10000 1000 TJ = 25 C F= 1MHz 100 0.1 1 0.5 0.6 0.7 0.8 0.9 INSTANTANEOUS FORWARD VOLTAGE , VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE ,(%) CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(mA) 20 10 NUMBER OF CYCLES AT 60Hz 4 10 REVERSE VOLTAGE , VOLTS 100 1.0