ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " UC Radial Lead Type series Excellent in voltage holding property. Suitable for quick charge and discharge. Wide temperature range (- 25 to +70C). Compliant to the RoHS directive (2002/95/EC). UM High Voltage UC Products which are scheduled to be discontinued. Not recommended for new designs Specifications Item Performance Characteristics Category Temperature Range - 25 to +70C Rated Voltage Range 2.5V Rated Capacitance Range 0.47 to 47F See Note Capacitance Tolerance 20% (20C) Leakage Current 0.5C (mA) [ C : Rated Capacitance(F) ] (After 30 minutes' application of rated voltage, 2.5V) Stability at Low Temperature Capacitance (- 25C) / Capacitance (+20C) x100 ESR, DCR* Refer to the list below (20C). * DC internal resistance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours at 70C. Capacitance change Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after storing the capacitors under no load for 1000 hours at 70C. Capacitance change Shelf Life Marking 70% ESR Leakage current ESR Leakage current Within 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Within 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Printed with white color letter on black sleeve. Type numbering system (Example : 2.5V 10F 10x40L) Drawing d Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 P0.5 D+0.5MAX. J UC 0 E 1 0 6 MPD Configuration Capacitance tolerance (20%) Rated capacitance (10F) Pressure relief vent Rated voltage (2.5V) L+ MAX. 15MIN 4MIN Series name Type (mm) D 6.3 8 10 12.5 16 18 P 2.5 3.5 5.0 5.0 7.5 7.5 0.8 0.8 d 0.5 0.6 0.6 1 0.6 2 (D < 10) 1.5 (D 10) 2.0 1 In case 10 x 40, lead dia d=0.8 2 In case L>25 for the 12.5 dia unit, lead dia d=0.8 Configuration D Pb-free lead finishing Pb-free PET sleeve 6.3 ED 8 10 PD 12.5 to 18 HD * Please refer to page 20 for end seal configulation. Dimensions Rated Voltage ( Code ) 2.5V (0E) Code ESR () (at 1kHz) DCR () Case size D x L (mm) 0.47 1.0 2.2 3.3 4.7 10 10 474 105 225 335 475 106 106 7 2 2 1 0.5 0.2 0.2 11 5 2 1.5 1 0.5 0.5 6.3 x 9 8 x 11.5 8 x 20 10 x 20 12.5 x 20 12.5 x 31.5 10 x 40 22 33 47 226 336 476 0.2 0.1 0.1 0.3 0.2 0.2 16 x 31.5 18 x 31.5 18 x 40 Rated Capacitance (F) Note : The capacitance calculated from discharge time (T) with constant current ( i ) after 30minuite charge with rated voltage (2.5V). The discharge current ( i ) is 0.01 x F (rated capacitance). A discharge time (T) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i x T CAT.8100Y