Ordering information AC-DC Power Supplies PCB Mount Type VAF5 VAF 1 5 2 05 3 1Series name 2Output wattage 3Output voltage R VAF VAF MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT VAF503 3.3 VOLTAGE[V] 3.3 CURRENT[A] 1.0 (Peak 1.2) VAF505 5.0 5 1.0 (Peak 1.2) VAF512 5.4 12 0.45 (Peak 0.54) VAF515 5.25 15 0.35 (Peak 0.42) VAF524 5.28 24 0.22 (Peak 0.27) SPECIFICATIONS MODEL VOLTAGE[V] CURRENT[A] INPUT ACIN 100V ACIN 200V FREQUENCY[Hz] ACIN 100V ACIN 200V LEAKAGE CURRENT[mA] EFFICIENCY[%] VOLTAGE[V] *1 CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +55C *2 RIPPLE[mVp-p] -10 - 0C *2 Io=100 - 120% *2 0 to +55C *2 OUTPUT RIPPLE NOISE[mVp-p] -10 - 0C *2 Io=100 - 120% *2 TEMPERATURE COEFFICIENT[mV] -10 to +55C *3 DRIFT[mV] OUTPUT VOLTAGE SETTING[V] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] START-UP TIME[ms] HOLD-UP TIME[ms] PROTECTION OVERCURRENT PROTECTION CIRCUIT OVERVOLTAGE PROTECTION INPUT-OUTPUT ISOLATION INPUT-FG OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE ENVIRONMENT VIBRATION IMPACT SAFETY AND AGENCY APPROVALS NOISE REGULATIONS CONDUCTED NOISE CASE SIZE/WEIGHT OTHERS COOLING METHOD INRUSH CURRENT[A] VAF503 VAF505 VAF512 VAF515 VAF524 AC85 - 264 1f or DC110 - 370 0.15typ (Io=100%) 0.10typ (Io=100%) 47 - 440 or DC 15typ (Io=100%) 30typ (Io=100%) 0.5max (60Hz, According to IEC60950 and DEN-AN) 68typ 77typ 78typ 78typ 81typ 3.3 5 12 15 24 1.0 (Peak 1.2) 1.0 (Peak 1.2) 0.45 (Peak 0.54) 0.35 (Peak 0.42) 0.22 (Peak 0.27) 20max 20max 48max 60max 96max 40max 40max 100max 120max 150max 80max 80max 120max 120max 150max 140max 140max 160max 160max 200max 180max 180max 200max 200max 240max 120max 120max 150max 150max 200max 160max 160max 180max 180max 230max 200max 200max 220max 220max 260max 100max 50max 120max 150max 300max 20max 20max 48max 60max 96max 3.19 - 3.47 4.90 - 5.30 11.40 - 12.60 14.25 - 15.75 23.0 - 25.0 Fixed 700max (ACIN 85V, Io=100%) 10typ (ACIN 85V, Io=100%), 20typ (ACIN 100V, Io=100%) Works over 125% of rating and recovers automatically Works over 115% of rating (By zener diode clamping) AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature) -10 to +71C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 19.6m/s2 10 - 55Hz, 3minutes period, 60minutes each along X, Y and Z axis (Non operating) 196.1m/s2 11ms, once each X, Y and Z axis (Non operating) UL60950-1, C-UL, EN60950-1, EN50178 Complies with DEN-AN and IEC60950-1 Complies with FCC-B, VCCI-B, CISPR22-B, EN55022-B 32X20X72.5mm [1.26X0.79X2.85 inches] (WXHXD) / 30g max Convection *1 Peak load for 10sec. or less in acceptable if the total wattage is less than the rated wattage. *2 This is the value that measured on measuring board with capasitor of 22mF. Measuared by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM101). *3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. VAF-2 VAF_E.indd 2 15.6.18 5:56:42 PM VAF5 External view Recommended size for processing PCB (TOP VIEW) 72.5 [2.85] 65.5 3.5 49.5 [0.14] [1.95] [2.58] 5-1.3 49.5 Outline [0.05] [1.95] 3.5 65.5 [0.14] [2.58] [0.16] [0.79] 12 [0.47] VAF bottom cover 1.7 bottom cover 4 4 20 (21 max.) ]= inches Input/Output Pin [0.07] [0.16] 5-1.0 [0.04] (stopper 1.7 [0.07] ) [0.61] (15.5) Dimensions in mm, [ Unit: 2mm 10 32 (TOP VIEW) [0.39] 27 [1.06] 2.5 10 [0.1] 2.5 [0.1] 29.5 -V C16 AC(L) [1.16] 12 +V Name Plate [0.39] [0.47] 27 [1.06] FG [1.26] AC(N) 1.0 [0.04] Weight: 30g max Tolerance: 0.5 [0.02] PCB material: CEM-3 PCB thickness: t=1.0 [0.04] Pin material: CPW with solder plated Recommended hole dia. to PCB: 1.3 Dimensions in mm, [ ]= inches VAF Performance data STATIC CHARACTERISTICS (VAF512) RISE TIME (VAF512) AC 85V AC170V AC264V 12.20 OUTPUT VOLTAGE 5V/DIV 12.30 12.10 DC Output 12.00 ACIN 85V Io=100% AC Input 11.90 0 0.2 0.4 50ms/DIV 0.6 OUTPUT CURRENT OVERCURRENT CHARACTERISTICS (VAF512) DERATING CURVE 14 100 10 75 LOAD FACTOR OUTPUT VOLTAGE 12 8 6 AC 85V AC170V AC264V 4 25 2 0 0.5 1.0 OUTPUT CURRENT 1.5 2.0 0 -10 0 10 20 30 40 50 60 71 AMBIENT TEMPERATURE VAF-3 VAF-3 VAF_E.indd 3 15.6.18 5:56:43 PM Ordering information AC-DC Power Supplies PCB Mount Type VAF10 VAF 1 10 2 05 3 1Series name 2Output wattage 3Output voltage R VAF VAF MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT VAF1003 6.6 VOLTAGE[V] 3.3 CURRENT[A] 2.0 (Peak 2.4) VAF1005 10.0 5 2.0 (Peak 2.4) VAF1012 10.8 12 0.9 (Peak 1.08) VAF1015 10.5 15 0.7 (Peak 0.84) VAF1024 10.8 24 0.45 (Peak 0.54) SPECIFICATIONS MODEL VOLTAGE[V] CURRENT[A] INPUT ACIN 100V ACIN 200V FREQUENCY[Hz] ACIN 100V ACIN 200V LEAKAGE CURRENT[mA] EFFICIENCY[%] VOLTAGE[V] *1 CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +55C *2 RIPPLE[mVp-p] -10 - 0C *2 Io=100 - 120% *2 0 to +55C *2 OUTPUT RIPPLE NOISE[mVp-p] -10 - 0C *2 Io=100 - 120% *2 TEMPERATURE COEFFICIENT[mV] -10 to +55C *3 DRIFT[mV] OUTPUT VOLTAGE SETTING[V] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] START-UP TIME[ms] HOLD-UP TIME[ms] PROTECTION OVERCURRENT PROTECTION CIRCUIT OVERVOLTAGE PROTECTION INPUT-OUTPUT ISOLATION INPUT-FG OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE ENVIRONMENT VIBRATION IMPACT SAFETY AND AGENCY APPROVALS NOISE REGULATIONS CONDUCTED NOISE CASE SIZE/WEIGHT OTHERS COOLING METHOD INRUSH CURRENT[A] VAF1003 VAF1005 VAF1012 VAF1015 VAF1024 AC85 - 264 1f or DC110 - 370 0.3typ (Io=100%) 0.2typ (Io=100%) 47 - 440 or DC 15typ (Io=100%) 30typ (Io=100%) 0.5max (60Hz, According to IEC60950 and DEN-AN) 65typ 74typ 78typ 78typ 81typ 3.3 5 12 15 24 2.0 (Peak 2.4) 2.0 (Peak 2.4) 0.9 (Peak 1.08) 0.7 (Peak 0.84) 0.45 (Peak 0.54) 20max 20max 48max 60max 96max 40max 40max 100max 120max 150max 80max 80max 120max 120max 150max 140max 140max 160max 160max 200max 180max 180max 200max 200max 240max 120max 120max 150max 150max 200max 160max 160max 180max 180max 230max 200max 200max 220max 220max 260max 100max 50max 120max 150max 300max 20max 20max 48max 60max 96max 3.19 - 3.47 4.90 - 5.30 11.40 - 12.60 14.25 - 15.75 23.0 - 25.0 Fixed 700max (ACIN 85V, Io=100%) 10typ (ACIN 85V, Io=100%), 20typ (ACIN 100V, Io=100%) Works over 125% of rating and recovers automatically Works over 115% of rating (By zener diode clamping) AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature) -10 to +71C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 19.6m/s2 10 - 55Hz, 3minutes period, 60minutes each along X, Y and Z axis (Non operating) 196.1m/s2 11ms, once each X, Y and Z axis (Non operating) UL60950-1, C-UL, EN60950-1, EN50178 Complies with DEN-AN and IEC60950-1 Complies with FCC-B, VCCI-B, CISPR22-B, EN55022-B 36X21X78mm [1.42X0.83X3.07 inches] (WXHXD) / 40g max Convection *1 Peak load for 10sec. or less in acceptable if the total wattage is less than the rated wattage. *2 This is the value that measured on measuring board with capasitor of 22mF. Measuared by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM101). *3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. VAF-4 VAF_E.indd 4 15.6.18 5:56:44 PM VAF10 External view Recommended size for processing PCB (TOP VIEW) 12 [0.47] 27 36 [1.42] 4.5 4.5 [0.18] AC(L) [1.06] -V C16 Outline [0.05] [0.18] Name Plate +V [1.24] FG 31.5 27 [1.06] AC(N) 12 [2.17] [0.47] [0.14] 5-1.3 55 [2.17] 12 55 [0.47] 3.5 12 71 [2.8] [0.47] 78 [3.07] 71 [2.8] Dimensions in mm, [ Unit: 2mm ]= inches VAF Input/Output Pin 4 [0.07] [0.16] bottom cover 1.7 bottom cover 5-1.0 [0.04] (stopper 1.7 [0.07] ) 3.5 [0.14] [0.16] [0.83] [0.65] 4 21 (22 max.) (16.5) (TOP VIEW) 1.0 [0.04] Weight: 40g max Tolerance: 0.5 [0.02] PCB material: CEM-3 PCB thickness: t=1.0 [0.04] Pin material: CPW with solder plated Recommended hole dia. to PCB: 1.3 Dimensions in mm, [ ]= inches VAF Performance data STATIC CHARACTERISTICS (VAF1012) RISE TIME (VAF1012) AC 85V AC170V AC264V 12.20 OUTPUT VOLTAGE 5V/DIV 12.30 12.10 DC Output 12.00 ACIN 85V Io=100% AC Input 11.90 0 0.2 0.4 0.6 0.8 1.0 50ms/DIV 1.2 OUTPUT CURRENT OVERCURRENT CHARACTERISTICS (VAF1012) DERATING CURVE 14 100 10 75 LOAD FACTOR OUTPUT VOLTAGE 12 8 6 AC 85V AC170V AC264V 4 25 2 0 1.0 OUTPUT CURRENT 2.0 3.0 0 -10 0 10 20 30 AMBIENT TEMPERATURE 40 50 60 71 (A, B, C mounting) VAF-5 VAF-5 VAF_E.indd 5 15.6.18 5:56:44 PM