COMCHIP Glass Passivated Single Phase Bridge Rectifiers SMD Diodes Specialist GBJ1502-G Thru. GBJ1508-G Reverse Voltage: 200 to 800V RoHS Device Features GBJ -Plastic package has underwriters laboratory Flammability classification 94V-0. -Glass passivated chip junction. 4.6 0.2 3.6 0.2 -High surge current capability. 4 0.2 -High temperautre soldering guaranteed: 260 OC/10sec, 0.375"(9.5mm) lead length, 5lbs.(2.3kg) tension. 5 + 2.5 0.2 2.2 0.2 1 0.1 17.5 0.5 -Ideal for printed circuit boards. 11 0.2 20 0.3 3.2 0.2 30 0.3 3.5 0.2 -High case dielectric with standing voltage of 2500 V RMS . 0.7 0.1 7.5 7.5 10 0.2 0.2 0.2 2.7 0.2 Mechanical Data -Case: 5S Molded Plastic body -Terminal: Plated leads solderable per MIL-STD750, method 2026. -Mounting position : Any (Note 3). -Mounting torque: 8 in-lbs max. -Weight: 0.26 ounce, 7.0 grams. Dimensions in millimeter Maximum ratings and electrical characteristics Rating at 25 OC ambient temperature unless otherwise specified. Symbol GBJ1502-G GBJ1504-G GBJ1506-G GBJ1508-G Unit Maximum repetitive peak reverse voltage V RRM 200 400 600 800 V Maximum RMS voltage V RMS 140 280 420 560 V 600 800 V Parameter Maximum DC blocking voltage V DC O 200 400 @T C =107 C @T A =25 OC I F(AV) 15 3.5 A Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 240 A Rating for fusing (t<8.3ms) I 2t 60 A 2sec Maximum instantaneous forward voltage drop per element at 7.5A DC VF 1.05 V IR 10 250 A RJA 22 T J ,T STG -55 ~ +150 Maximum average forward output current Maximum reverse current at rated DC blocking voltage T A =25 OC O T A =125 C Typical thermal resistance per leg Operating and storage temperature range O C/W O C Note: 1. Unit case mounted on Al plate heatsink. 2. Unit mounted on P.C.B. with 0.5x0.5" ( 12x12mm) copper pads and 0.375"(9.5mm) lead length. 3. Recommended mounting position is to bolt down on heatsink with silicon thermal compound for maximum heat transfer with #6 screws. REV:A QW-BBR10 Page 1 COMCHIP Glass Passivated Single Phase Bridge Rectifiers SMD Diodes Specialist Rating and Characteristics Curves (GBJ1502-G Thru. GBJ1508-G) Fig. 2 Max. Non-repetitive Forward Surge Current Per Leg 240 20 Peak Forward Surge Current (A) Average Output Forward Current (A) Fig. 1 Output Rectified Current Derating Curve Heat-Sink Mounting, TC 15 10 5 P.C.B. Mounting, 0 0 50 100 210 180 150 120 90 60 30 0 150 1.0 Cycle 1 10 Ambient Temperature ( OC) Fig. 4 Typical Reverse Characteristics Per Leg Fig. 3 Typical Forward Characteristics Per Leg 100 Instantaneous Reverse Current (A) Instantaneous Forward Current (A) 100 10 1 0.1 0.01 0.6 0.8 1.0 1.2 O TA = 125 C 10 1 0.1 O TA = 25 C 0.01 1.4 Fig. 5 Typical Junction Capacitance Per Leg 20 40 60 80 100 Fig. 6 Typical Transient Thermal Impedance 1000 10 Transient Thermal Impedance ( OC/W) Junction Capacitance (pF) 0 Percent of Rated Peak Reverse Voltage Instantaneous Forward Voltage (V) 100 10 1 100 Number of Cycles at 60Hz 1 10 Reverse Voltage (V) 100 1 0.1 0.01 0.1 1 10 Heating Time (sec) REV:A QW-BBR10 Page 2