TPS616(F) TOSHIBA Phototransistor Silicon NPN Epitaxial Planar TPS616(F) Floppy Disk Drive VCR Position Detector Of Home Electric Equipment Opto-electronic Switch * 3.1mm epoxy resin package. (black) * Light current: IL = 10A (min.) at E = 0.1mW/cm2 * Half value angle: 1/2 = 30 (typ.) * Protected from external light by black mold packaging. Unit in mm Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Collector-emitter voltage VCEO 30 V Emitter-collector voltage VECO 5 V Collector current IC 20 mA Collector power dissipation PC 75 mW Collector power dissipation derating (Ta > 25C) PC/C -1 mW/C Operating temperature range Topr -30~85 C Storage temperature range Tstg -30~100 C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 TOSHIBA 0-3D1 Weight: 0.12g (typ.) Pin Connection 1 2 1 . Emitter 2 . Collector 2007-10-01 TPS616(F) Opto-electrical Characteristics (Ta = 25C) Characteristic Dark current Symbol ID(ICEO) Test Condition VCE = 24V Min. Typ. Max. Unit 0.01 0.1 A 10 75 A 0.2 0.4 V 2 VCE = 3V, E = 0.1mW / cm IL (Note 2) (Note 1) Light current 2 IC = 5A, E = 0.1mW / cm Collector-emitter saturation voltage VCE(sat) peak sensitivity wavelength P 900 nm 1 2 30 Half value angle Switching time (Note 1) Rise time tr VCC = 10V,IC = 1mA 9 Fall time tf RL = 1k 10 s Note 1: Color temperature = 2870K,standard tungsten lamp. Note 2: IL classification A: 10~25A, B: 17~42.5A, C: 30~75A, AB: 10~42.5A, BC: 17~75A Precaution Please be careful of the followings. 1. Soldering temperature: 260C max. Soldering time: 3s max. (Soldering portion of lead: Above 1.5mm from the body of the device) 2. If the lead is formed, the lead should be formed at a distance of 2mm from the body of the device. Soldering shall be performed after lead forming. 2 2007-10-01 TPS616(F) Fig.1 Switching time test circuit VCC Input TLN119(F) (GaAs LED) Input pulse 0 TPS616(F) Output R 90% RL Output pulse 10% 0 tf tr ID - Ta PC - Ta 1 E=0 60 Dark current ID (A) Allowable collector power dissipation PC (mW) 80 40 20 0 0 20 40 60 Ambient temperature 80 Ta IL - E Light current IL (A) 100 10-2 -3 0 20 (C) 40 60 80 100 Ambient temperature Ta (C) (Typ.) IL - VCE VCE = 3 V Ta = 25C Color temperature = 2870K Ta = 25C (Typ.) 0.6 250 0.5 50 30 10 5 200 0.4 150 0.3 100 0.2 50 3 1 0.01 10-1 10 100 Light current IL (A) 300 (Typ.) VCE = 24 V 0.03 0.05 0.1 0.3 0.5 0 0 1 Radiant incidence E (mW / cm2) E=0.1mW / cm2 2 4 6 Collector-emitter voltage 3 8 10 VCE (V) 2007-10-01 TPS616(F) Directional Sensitivity Characteristic (Typ.) (Ta = 25C) Frequency Characteristics (Typ.) 12 VCC = 5 V Ta = 25C Light source = TLN119(F) (GaAs LED) Radiation angle 20 10 0 10 (dB) 8 20 Relative output 30 30 40 40 50 50 60 60 70 70 80 90 1.0 0.8 0.6 0.4 0 0.2 4 0 RL=100 -4 -8 10k -12 80 -16 90 -20 1 3 5 Relative sensitivity 10 30 5k 1k 50 Frequency f 500 100 300 500 1000 (kHz) Coupling Characteristics With TLN119(F) Switching characteristics (Typ.) 3000 Ta=25C 90% Vcc= 10V Input 10% Output pulse 1000 90% Output TLN119(F) (GaAs LED) R Input pulse TLN119(F) IE=3.0mW/sr 300 tf (A) tr 200 tr(RL=10k) 100 Collector current IC Switching time (s) 500 10% R L tf(RL=10k) 50 30 tf(RL=1k) 10 1.5 100 50 30 Ta = 25C TPS615(F) Using sample 10 tr(RL=1k) tf(RL=100) 5 0.5 :IL = 28.1A at VCE = 3V E = 0.1mW/cm2 5 3 I 3V IC C 3 3V tr(RL=100) 1 0.02 1 0.05 0.1 0.3 0.5 Collector current IC 1 3 5 1 (mA) d TLN119 TLN119(F) 3 d TPS616 TPS615(F) 5 10 Distance 4 30 50 100 200 d (mm) 2007-10-01 TPS616(F) Spectral Response (Typ.) 120 Ta = 25C Relative sensitivity (%) 100 80 60 40 20 0 0 200 400 600 800 1000 1200 Wavelength (nm) 5 2007-10-01 TPS616(F) RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-10-01