Features
n Non-contacting magnetic technology
n Highly resistant to vibration/shock
n Highly resistant to fluid/dust ingress
n Programmable slope
n Robust design for industrial applications
n Ideal memory positioning sensor
n RoHS compliant*
AMM20B Multiturn Magnetic Position Sensor
*RoHS Directive 2002/95/EC Jan. 27, 2003 including
annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Users should verify actual device performance in their
specific applications.
The products described herein and this document are
subject to specific legal disclaimers as set forth on the last
page of this document, and at www.bourns.com/docs/legal/
disclaimer.pdf.
Electrical Characteristics1 (@ 25 °C)
VDD Supply Voltage ..................................................................................................5 V ± 10 %
Supply Current 2
For Low Speed Processing (Code L) ................................................................... 12 mA max.
For High Speed Processing (Code H) ................................................................. 15 mA max.
Output Signal (Single) ..................................................................................................... Analog
Independent Linearity ...................................................... ±0.5 % (±0.3 % available on request)
Backlash ..................................................................................................................... < 10 ° typ.
Effective Electrical Angle 3
3-10 Turns ...........................1080 °, 1440 °, 1800 °, 2160 °, 2520 °, 2880 °, 3240 ° or 3600 °
11-16 Turns .....................................................3960 °, 4320 °, 4680 °, 5040 °, 5400 °, 5760 °
Voltage Output (Programmable) ................................................................ 1 to 99 % VDD ±1 %
Output Resolution ...............................................................................................12 bit @ 3600 °
Load Resistance Recommended ....................................................................... 10K ohms to
Overvoltage Protection .................................................................................................+20 VDC
Reverse Voltage Protection ...........................................................................................-10 VDC
Environmental Characteristics
Operating and Storage Temperature .................................................................-40 ° to +125 °C
Humidity....................................................................... MIL-STD-202, Method 103, Condition B
Insulation Resistance @ 500 VAC..........................................................................100 MW min.
Rotational Life (Shaft Revolutions) .............................................................................. 50 million
Vibration ..............................................................................................................................15 G
Shock...................................................................................................................................50 G
IP Rating ..............................................................................................................................IP50
Mechanical Characteristics (@ 25 °C)
Mechanical Angle
3-10 Turns ............................................................................................................. 3960 ° min.
11-16 Turns ........................................................................................................... 6480 ° min.
Shaft/RPM ...........................................................................................................500 RPM max.
Torque
Starting & Running ...................................................................... 2.82 N-cm. (4.0 oz-in.) max.
Mounting ........................................................................... 170-200 N-cm (15-18 lb.-in.) max.
Shaft Material ...................................................................................................... Stainless steel
Terminal Pins ......................................................................Phos. Bronze, 100 % tin plated (e3)
Bearing .................................................................................................................Bronze sleeve
Housing and Rear Lid .................................................................................................... UL94V0
Soldering Condition
Manual Soldering ................................................. 96.5Sn/3.0Ag/0.5Cu solid wire or no-clean
rosin cored wire; 370 °C (700 °F) max. for 3 seconds
Wave Soldering .............................................. 96.5Sn/3.0Ag/0.5Cu solder with no-clean ux;
260 °C (500 °F) max. for 5 seconds
Wash processes ........................................................................................Not recommended
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
2 See “Processing Speed” in How to Order selection guide.
3 Other Effective Electrical Angles available. See How to Order selection guide.
Product Dimensions
MEXICO
AMM20B
S1+-
14.29
(0.56)
21.55 ± 0.38
(.848 ± .015)
1.570
(0.062)
0.64 ± 0.25
(.025 ± .010)
0.64 ± 0.25
(.025 ± .010)
5.080
(0.200)
20.22
(0.80)
10.29 +0.00/-0.13
(.405 +.000/-.005) DIA.
6.34 +0.00/-0.07
(.250 +.000/-.003) DIA.
7.62 ± 0.38
(.300 ± .015)
20.62 ± 0.78
(.812 ± .031)
X 45 ° CHAMFER
0.250
(0.010)
9.53 ± 0.38
(.375 ± .015)
3/8 ” 32-UNEF-2A THD
WIDE XADJUSTMENT SLOT 0.81
(.032) DEEP
0.81
(.032)
DIMENSIONS: MM
(INCHES)
TOLERANCES EXCEPT WHERE NOTED
DECIMALS: .XX ± .50
(.02)
.XXX ± .127
(.005)
No. of Turns EEA Resolution
3 1080 1228
4 1440 1638
5 1800 2047
6 2160 2456
7 2520 2866
8 2880 3275
9 3240 3685
Resolution
No. of Turns EEA Resolution
10 3600 4094
11 3960 2816
12 4320 3072
13 4680 3328
14 5040 3584
15 5400 3840
16 5760 4096
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
AMM20B Multiturn Magnetic Position Sensor
How To Order
REV. 03/19
Standard Output: 10-Turn CW Increasing (Code 380 Shown)
8
10
12
6
4
2
0
0 100 200
Shaft Side Load (grams)
Rotational Life (Millions of Cycles)
300 400 50050 150 250 350 450
40
30
20
10
0
90
100
80
70
60
50
0 1000
CW DIRECTION
1500
Mechanical Angle (°)
Vout (%)
2500 3000 4000500 2000 3500
OUTPUT
AMM2 0B5A1BLASL380
Code
M
Description
Multiturn
CONFIGURATION
Code
B
Description
Bushing Mount,
Stainless Steel Shaft:
13/16 ” FMS, 1/4 ” Dia.
Bushing Material: Brass
Bearing Type: Sleeve
MOUNTING CONFIGURATION
Code
AM
Description
Analog Magnetic
MODEL DESIGNATOR
Code
20
Description
20 mm
SIZE
3-10 Turns
Code
Type
Analog / Single Output
NUMBER OF TURNS / OUTPUT TYPE
Code
24
32
40
48
56
64
72
80
Description
1080 ° (3 Turns)
1440 ° (4 Turns)
1800 ° (5 Turns)
2160 ° (6 Turns)
2520 ° (7 Turns)
2880 ° (8 Turns)
3240 ° (9 Turns)
3600 ° (10 Turns)
EFFECTIVE
ELECTRICAL ANGLE
3-10 Turns
Code
88
96
02
10
18
26
Description
3960 ° (11 Turns)
4320 ° (12 Turns)
4680 ° (13 Turns)
5040 ° (14 Turns)
5400 ° (15 Turns)
5760 ° (16 Turns)
11-16 Turns
Code
5
Description
5 VDC
Code
H
L
Output Refresh Rate
High (400 µs Typ.)
Low (660 µs Typ.)
PROCESSING SPEED
Code
S
Description
Slotted
SHAFT STYLE
Code
A
Description
1-99 % of VCC
VOLTAGE RATIO ±1 %
Code
1
3
Description
CCW (Output Increasing)
CW (Output Increasing)
Shaded areas represent most common features.
DIRECTION
Code
A
B
C
EEA (Turns)
3-16
5-16
10-16
Description
± 1.0 %
± 0.5 %
± 0.3 %
INDEPENDENT LINEARITY
A1
11-16 Turns
B1
Code
L
Description
Axial PC Pin
TERMINAL CONFIGURATION
SUPPLY VOLTAGE, VCC
Rotational Life vs. Shaft Side Load
40
50
60
30
20
10
0
0 100 200
Shaft Side Load (grams)
Rotational Life (Millions of Cycles)
300 400 50050 150 250 350 450
40
30
20
10
0
90
100
80
70
60
50
0 1000
CW DIRECTION
1500
Mechanical Angle (°)
Vout (%)
2500 3000 4000500 2000 3500
OUTPUT
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
afliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the users application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specic devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualication (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualication. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the users
sole risk. Life-critical applications include devices identied by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classications outside of the United States.
Bourns expressly identies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the users sole risk. If Bourns
expressly identies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identication means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
users sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost prots, and (ii) any and all implied warranties, including implied warranties
of tness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplied Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R