2015-12-21 OSLON(R) SSL 80 Datasheet Version 1.1 GF CS8PM1.24 This ultra-compact 1 W class LED offers a prefocused radiation pattern. Its low thermal resistance allows this device to be highly efficient even at high driving currents. Applications demanding long lifetimes are perfectly addressed with this highly reliable LED. Diese auerst kompakte LED der 1-W-Klasse hat eine vorfokussierte Abstrahlcharakterisitik. Der geringe Warmewiderstand sorgt selbst bei hohen Stromen fur hochste Lichtausbeute. Diese zuverlassige LED eignet sich besonders fur Applikationen, die eine hohe Lebenserwartung erfordern. Features: * Package: SMT ceramic package with silicone resin and silicone lens * Viewing angle at 50 % IV: 80 * Color: 730 nm (far-red) * Radiant Flux: typ. 231 mW * Radiant Efficiency: typ. 36 % * Corrosion Robustness: Superior Corrosion Robustness Besondere Merkmale: * Gehausetyp: SMT-Keramikgehause mit Silikonverguss und -linse * Abstrahlwinkel bei 50 % IV: 80 * Farbe: 730 nm (far-red) * Strahlungsfluss: typ. 231 mW * Lichtausbeute: typ. 36 % * Korrosionsstabilitat: Hochste Korrosionsbestandigkeit Applications * Horticultural Lighting Anwendungen * Gewachshausbeleuchtung 2015-12-21 1 Version 1.1 GF CS8PM1.24 Ordering Information Bestellinformation Type: Radiant Power 1) page 19 Ordering Code Typ: Strahlungsleistung 1) Seite 19 Bestellnummer IF = 350 mA E [mW] GF CS8PM1.24-2S3S-1 201 ... 250 Q65111A7119 GF CS8PM1.24-3S4S-1 224 ... 280 Q65111A7133 Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. GF CS8PM1.24-3S4S-1 means that only one group 3S, 4S will be shippable for any packing unit. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one packing unit. E. g. GF CS8PM1.24-3S4S-1 means that only one wavelength group 1 will be shippable. GF CS8PM1.24-3S4S-1 means that the device will be shipped within the specified limits as stated on page 5. Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. GF CS8PM1.24-3S4S-1 bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen 3S, 4S enhalten ist. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Wellenlangengruppe geliefert. Z. B. GF CS8PM1.24-3S4S-1 bedeutet, dass in einer Verpackungseinheit nur eine der Wellenlangengruppen 1 enthalten ist (siehe Seite 5). GF CS8PM1.24-3S4S-1 bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird. 2015-12-21 2 Version 1.1 GF CS8PM1.24 Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ... 120 C Storage temperature range Lagertemperatur Tstg -40 ... 100 C Junction temperature absolute * Sperrschichttemperatur absolut * Tj, abs 135 C Junction temperature Sperrschichttemperatur Tj 125 C Forward current Durchlassstrom (TS = 25 C) IF 100 ... 1000 mA Surge current Stostrom IFM 2000 mA Reverse current 2) page 19 Sperrstrom 2) Seite 19 IR 200 mA ESD withstand voltage ESD Festigkeit (acc. to ANSI/ESDA/JEDEC JS-001 - HBM, Class 3B) VESD 8 kV Note: * This is verified by testing 30 pieces. Pass criteria: No catastrophic failures allowed, luminous flux must be better than L70B50 after 1000 h. Anm: * Dieser Wert wird durch den Test von 30 Bauteilen abgesichert. Dabei durfen keine Totalausfalle auftreten und der Lichtstrom mu nach 1000 h uber L70B50 liegen. 2015-12-21 3 Version 1.1 GF CS8PM1.24 Characteristics (TS = 25 C; IF = 350 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Wavelength at peak emission Wellenlange d. emittierten Lichtes (typ.) peak 730 nm Centroid Wavelength Zentrumswellenlange (min.) (typ.) (max.) centr centr centr 710 721 730 nm nm nm Dominant Wavelength 3) page 19 Dominantwellenlange 3) Seite 19 (typ.) dom NA nm Spectral bandwidth at 50% Irel max Spektrale Bandbreite b. 50% Irel max (typ.) 30 nm Viewing angle at 50 % IV Abstrahlwinkel bei 50 % IV (typ.) 2 80 Forward voltage Durchlassspannung (min.) (typ.) (max.) VF VF VF 1.60 1.85 2.30 V V V Reverse voltage Sperrspannung (IR = 20 mA) (max.) VR 1.2 V Real thermal resistance junction / solder point (typ.) (max.) Rth JS real Rth JS real 9.8 12.7 K/W K/W Rth JS el Rth JS el 6.3 8.1 K/W K/W 4) page 19 Realer Warmewiderstand Sperrschicht / Lotpad 4) Seite 19 "Electrical" thermal resistance junction / solder point (typ.) 4) page 19 (max.) "Elektrischer" Warmewiderstand Sperrschicht / Lotpad 4) Seite 19 (with efficiency e = 36 %) 2015-12-21 4 Version 1.1 GF CS8PM1.24 Brightness Groups Helligkeitsgruppen Luminous Flux 1) page 19 Group Luminous Flux 1) page 19 Luminous Intensity 5) page 19 Lichtstrom 1) Seite 19 Lichtstrom 1) Seite 19 Lichtstarke 5) Seite 19 (min.) V [lm] (max.) V [lm] (typ.) IV [cd] 2S 0.201 0.224 0 3S 0.224 0.25 0 4S 0.25 0.28 0 Gruppe Centroid Wavelength Groups Centroid Wellenlangengruppen Group far-red Gruppe (min.) centr [nm] (max.) centr [nm] 1 710 730 Note: No packing unit / tape ever contains more than one color group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Farbe enthalten. 2015-12-21 5 Version 1.1 GF CS8PM1.24 Group Name on Label Gruppenbezeichnung auf Etikett Example: 3S-1 Beispiel: 3S-1 Brightness Helligkeit Wavelength Wellenlange 3S 1 Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. 2015-12-21 6 Version 1.1 GF CS8PM1.24 Relative Spectral Emission - V() = Standard eye response curve 5) page 19 Relative spektrale Emission - V() = spektrale Augenempfindlichkeit 5) Seite 19 rel = f (); TS = 25 C; IF = 350 mA rel GF CS8PM1.24 1,0 : V : Far-red 0,8 0,6 0,4 0,2 0,0 350 400 450 500 550 600 650 700 750 800 [nm] Radiation Characteristics 5) page 19 Abstrahlcharakteristik 5) Seite 19 Irel = f (); TS = 25 C GF CS8PM1.24 [] -10 0 10 -20 20 30 40 50 60 70 80 90 1,0 -30 -40 0,8 -50 0,6 -60 0,4 -70 0,2 -80 0,0 -90 -100 2015-12-21 7 Irel Version 1.1 GF CS8PM1.24 Forward Current 5) page 19 , 6) page 19 Durchlassstrom 5) Seite 19 , 6) Seite 19 IF = f (VF); TS = 25 C IF [mA] Relative Radiant Power 5) page 19 , 6) page 19 Relative Strahlungsleistung 5) Seite 19 , 6) Seite 19 E/E(350 mA) = f(IF); TS = 25 C e GF CS8PM1.24 1000 GF CS8PM1.24 3,0 e(350mA) 2,5 800 2,0 600 1,5 1,0 400 0,5 200 0,0 100 1,6 1,8 2,0 2,2 0 0 10 20 2,4 VF [V] 2015-12-21 40 0 0 60 0 80 00 10 IF [mA] 8 Version 1.1 GF CS8PM1.24 Relative Forward Voltage 5) page 19 Relative Vorwartsspannung 5) Seite 19 VF = VF - VF(25 C) = f(Tj); IF = 350 mA VF [V] Relative Radiant Power 5) page 19 Relative Strahlungsleistung 5) Seite 19 E/E(25 C) = f(Tj); IF = 350 mA E GF CS8PM1.24 0,3 E (25C) 0,2 1,0 0,1 0,8 0,0 0,6 -0,1 0,4 -0,2 0,2 -0,3 -40 -20 0 20 40 60 80 0,0 -40 100 120 Centroid Wavelength 5) page 19 Centroid Wellenlange 5) Seite 19 centr = centr - centr (25C) = f(Tj); IF = 350 mA GF CS8PM1.24 15 10 5 0 -5 -10 -40 -20 0 20 40 60 80 100 120 Tj [C] 2015-12-21 -20 0 20 40 60 80 100 120 Tj [C] Tj [C] centr [nm] GF CS8PM1.24 1,2 9 Version 1.1 GF CS8PM1.24 Max. Permissible Forward Current Max. zulassiger Durchlassstrom IF = f (T) IF [A] GF CS8PM1.24 1100 1000 900 800 700 600 500 400 300 200 100 Do not use below 100 mA 0 0 20 40 60 80 100 120 140 Ts [C] 2015-12-21 10 Version 1.1 GF CS8PM1.24 Package Outline 7) page 19 Mazeichnung 7) Seite 19 Approximate Weight: 25 mg Gewicht: 25 mg Mark: Cathode Markierung: Kathode ESD information: LED is protected by ESD device which is connected in parallel to LED-Chip. ESD Information: Die LED enthalt ein ESD-Bauteil, das parallel zum Chip geschaltet ist. Corrosion robustness: Test conditions: 40 C / 90 % rh / 15 ppm H2S / 336 h = Stricter than IEC 60068-2-43 (H2S) [25C / 75 % rh / 10 ppm H2S / 21 days] = Regarding relevant gas (H2S) stricter than EN 60068-2-60 (method 4) [25 C / 75 % rh / 200 ppb SO2, 200 ppb NO2,10 ppb Cl2 / 21 days] Korrosionsfestigkeit: Test Kondition: 40C / 90 % rh / 15 ppm H2S / 336 h = Besser als IEC 60068-2-43 (H2S) [25C / 75 % rh / 10 ppm H2S / 21 Tage] = Bezogen auf das Gas (H2S) besser als EN 60068-2-60 (method 4) [25C / 75 % rh / 200ppb SO2, 200ppb NO2,10ppb Cl2 / 21 Tage] 2015-12-21 11 Version 1.1 GF CS8PM1.24 Reflow Soldering Profile Reflow-Lotprofil Product complies to MSL Level 2 acc. to JEDEC J-STD-020D.01 OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 s 300 250 t OHA04612 Symbol Symbol Profile Feature Profil-Charakteristik Pb-Free (SnAgCu) Assembly Minimum ) Ramp-up rate to preheat* 25 C to 150 C Time tS TSmin to TSmax tS 60 Ramp-up rate to peak*) TSmax to TP Recommendation Maximum 2 3 100 120 2 3 Unit Einheit K/s s K/s Liquidus temperature TL 217 Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 C Time within 5 C of the specified peak temperature TP - 5 K tP 20 30 s 3 6 K/s 10 Ramp-down rate* TP to 100 C 480 Time 25 C to TP All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 2015-12-21 C 12 s Version 1.1 GF CS8PM1.24 Taping 7) page 19 Gurtung 7) Seite 19 2015-12-21 13 Version 1.1 GF CS8PM1.24 Tape and Reel Gurtverpackung 12 mm tape with 600 pcs. on 180 mm reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions [mm] Gurtmae [mm] Tape dim ensions in m m W P0 12 + 0.3 / - 0.1 4 0.1 P1 P2 D0 E F 4 0.1 or 8 0.1 2 0.05 1.5 0.1 1.75 0.1 5.5 0.05 Reel dimensions [mm] Rollenmae [mm] Reel dim ensions in m m A W Nmin W1 W2max 180 12 60 12.4 + 2 18.4 2015-12-21 14 Version 1.1 GF CS8PM1.24 Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) OSRAM Opto EX A RoHS Compliant (6P) BATCH NO: 1234567890 (1T) LOT NO: 1234567890 BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors MP ML Temp ST X XXX C X (9D) D/C: 1234 Pack: RXX LE DEMY XXX X_X123_1234.1234 X (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien Moisture-sensitive label or print L VE el LE see . lab e H) nk, (R bla cod If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 s VE RS _ < inf pa % ainITI TO of to ak 90 urs d nt ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 baRE CO te 48 C su ss e Ho co ce is 24 6 da e y MI 40 be tim C e ThISTU th < tor ll pro tim SE or ). 23 tim e at t wi ntC or l wi fac MO Flo tim s TO at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ve % ure ba ed low ba Le mo ba e al d ure Le ist en ref e e 10 tim ure se for ist ale op se for > , Mo se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. wi 10 ba tor J-S thi, va p. elf Ye ar ks _ < e icat me , C 1 Ye ee urs Sh terlow tem ted at ed uir > 1 W Ho un Af Indno uir DE 1. d e 4 8 ref dy reqy is 2. JE bo e Mo ore tim 16 req : C/ e es dit2b a) St tim or mi IP ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo Barcode label N TIO U A C M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OSR Desiccant OHA00539 Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. 2015-12-21 15 Version 1.1 GF CS8PM1.24 Transportation Packing and Materials Kartonverpackung und Materialien Barcode label 8 Y M DE R 18 -1 Q P -1 + P: C: 99 D/ 21 00 (9 D) 21 : 20 00 : 14 2 5 (Q )Q TY O H 12 34 S S em R ic AM on du O p ct to or H NO s TC 3G BA (6 P) NO : 12 11 00 LO T (1 T) NO : OD PR ) (X 44 (G ) G RO UP : P -1 + Q -1 R 18 DE M Y Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R0 ditio 0 C R PA 77 na RT l TE CK VA XT R: M u L lt S iT Y O T P 67 L 6 E Bi D Bi n1 D) (9 : 20 00 D/ C: 01 Muster TY )Q : 34 : NO O PR (X ) Packing Sealing label Dimensions of transportation box in mm Width Length Height Breite Lange Hohe 195 5 195 5 30 5 2015-12-21 M RA OS D 5 14 2 110 0 (Q O S TC (1 T) LO T NO (6 P) : 12 BA S 8 3G em R ic AM o n O d u p ct to o H rs NO 2199 H 12 2100 01 44 el A C OU L GR E V LE see . lab e H) nk, cod (R bla r If ty ba . idi RH m hu 0% e /6 ive d C re ag lat ra ck re 30 _ < inf pa % k s of to 90 ea ur s d ). < ns (p or ur s d Ho de , cteg itio ur s Ho an bje co C 72 sin nd Ho ur 5 te 48 C su es e Ho IC co is UR 24 6 da e M 40 be oc ry tim C e Th STSE r th < ll pr tim cto ). r OI oo 23 wi nt tim e at l wi fa r M TO Fl oo tim s at at ale C at e. ica Fl th oo r th ur el OP nt Fl oo on es uiv if: read ed l 4 5 Fl , lab m ide eq low l oc ve vic is ingen be or de 24 l 5a6 pr ve Le de nt wh e te co , w, g: ve l Le ke r re ou se da ba ed flo Le ve tu re m % ba e ba al d Le r en re tu re e re 10 ois tim se fo tu re ale op se fo > , M r se ois 3 is , is ha se M ois tu nk be oo . 03 nk rd g M ois in r-p bla in Fl RH g, DM ba po If blath % kin Ca life is (if . ar ST p. wi 10 baator et Jelf r th va Ye ar ks s m _ < m ed 1 Ye ee ur d, C iredic t Sh te w, te at nt > 1 W Ho Af flody qu In no ire DE 1. e 4 8 ou re ed re ty is qu JE 2. bo e M or tim 16 re C/ : e es idi 2b r a) St tim mor is IP ed r oo tim e vic b) g e r Hu Fl en oo tim De 2a kin nc te Fl oo r a) op 3. b) ba re Fl oo da e fe l 1 2 Fl If al re tim ve l 4. se d l 2a3 ve Le g an ve l Le re Ba te Le ve tu re Le tu Da ois re tu re M ois M ois tu M ois M Nns IVEORS ai IT CT nt TIO co NS DU g SE U ba E ON (G ) M u L lt S iT Y O T67 P L 6 Muster E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label 16 OHA02044 Version 1.1 GF CS8PM1.24 Notes Hinweise The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Moderate risk (exposure time 0.25 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. spotlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfullen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - Moderate risk (Expositionsdauer 0,25 s). Unter realen Umstanden (fur Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefahrdung aus. Grundsatzlich sollte jedoch erwahnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundares Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.B. Spotlights), kann ein temporar eingeschranktes Sehvermogen oder auch Nachbilder zu Irritationen, Belastigungen, Beeintrachtigungen oder sogar Unfallen fuhren. Subcomponents of this LED contain, among other substances, goldplated and Ag-filled materials. In spite of the improved corrosion stability of this LED, it can be affected by environments that contain very high concentrations of aggressive substances. Therefore, we recommend avoiding aggressive atmospheres during storage, production and use. Einzelkomponenten dieser LED enthalten u.a. goldbeschichtete und Ag-gefullte Materialien. Trotz der verbesserten Korrosionsstabilitat dieser LED konnen Einzelkomponenten durch sehr hohe Konzentration aggressiver Substanzen angegriffen werden. Aus diesem Grund wird empfohlen, aggressive Umgebungen wahrend der Lagerung, Produktion und im Betrieb zu vermeiden. This LED is designed for specific/recommended applications only. Please consult OSRAM Opto Semiconductors Sales Staff in advance for detailed information on other non-recommended applications (e.g. automotive) OR Please visit www.osram-os.com/appnotes. Change management for this component is aligned with the requirements of the lighting market. Die LED ist ausschlielich fur spezifisch empfohlene Anwendungen konzipiert. Bitte kontaktieren Sie das OSRAM Opto Semiconductors Vertriebspersonal fur detailierte Informationen uber nicht empfohlene Anwendungsbereiche (z.B. Automobilbereich). oder besuchen Sie www.osram-os.com/appnotes Das Anderungsmanagement dieses Bauteils ist an den Anforderungen des Lichtmarktes ausgerichtet. 2015-12-21 17 Version 1.1 GF CS8PM1.24 Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Bei abweichenden Angaben im zweisprachigen Wortlaut haben die Angaben in englischer Sprache Vorrang. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. 2015-12-21 *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 18 Version 1.1 GF CS8PM1.24 Glossary Glossar 1) Brightness: Brightness values are measured during a current pulse of typically 10 ms, with a tolerance of +/- 7%. 1) Helligkeit: Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 10 ms, mit einer Genauigkeit von 7% ermittelt. 2) Wavelength: The wavelength is measured at a current pulse of typically 10 ms, with a tolerance of 0.5 nm. Forward Voltage: The Forward voltage is measured during a current pulse duration of typically 1 ms with a tolerance of 0.05V . 2) Wellenlange: Die Wellenlage wird wahrend eines Strompulses einer typischen Dauer von 10 ms, mit einer Genauigkeit von 0.5 nm gemessen. Durchlassspannung: Spannungswerte werden mit einer Stromeinpragedauer von 1 ms, mit einer Genauigkeit von 0.05 V ermittelt. 4) Thermal Resistance: Rth max is based on statistic values (6). 4) Warmewiderstand: Rth statistischen Werten (6). 5) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 5) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 6) Chromaticity coordinate groups: Chromaticity coordinate groups are measured during a current pulse duration of typically 10ms with a tolerance of 0.005. Characteristic curve: In the range where the line of the graph is broken, you must expect higher differences between single LEDs within one packing unit. 6) Farbortgruppen: Farbortgruppen werden mit einer Stromeinpragedauer von 10 ms, mit einer Genauigkeit von 0.005 ermittelt. 7) Kennlinien: Im gestrichelten Bereich der Kennlinien muss mit erhohten Abweichungen zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with 0.1 and dimensions are specified in mm. 8) Matoleranz: Wenn in der Zeichnung nicht anders angegeben, gilt eine Toleranz von 0,1. Mae werden in mm angegeben. 3) 7) 8) 2015-12-21 3) 19 max basiert auf Version 1.1 GF CS8PM1.24 Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2015-12-21 20