ALUMINUM ELECTROLYTIC CAPACITORS VR Miniature Sized series VZ High Temperature One rank smaller case sizes than VX series. Compliant to the RoHS directive (2002/95/EC). VR Smaller VK Specifications Item Performance Characteristics Category Temperature Range - 40 to +85C (6.3V to 400V), - 25 to +85C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.1 to 33000F Capacitance Tolerance 20% at 120Hz, 20C Rated voltage ( V) Leakage Current Tangent of loss angle (tan ) 6.3 to 100V After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (A), whichever is greater. 160 to 450V After 1 minute's application of rated voltage, CV <= 1000 :1 = 0.1CV+40A or less After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (A), whichever is greater. After 1 minute's application of rated voltage, CV > 1000 :1 = 0.04CV+100 (A) or less Measurement frequency : 120Hz, Temperature : 20C For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Rated voltage ( V) 6.3 10 16 25 35 tan (MAX.) 0.28 0.24 0.20 0.16 0.14 50 0.12 63 0.10 100 0.08 160 to 315 350 to 450 0.20 0.25 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage ( V) Impedance ratio Z- 25C / Z+20C ZT / Z20 (MAX.) Z- 40C / Z+20C 6.3 5 12 10 4 10 16 3 8 25 2 5 35 2 4 50 2 3 63 2 3 100 2 3 160 to 200 250 to 350 3 4 4 8 400 6 10 450 15 Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Shelf Life After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Type numbering system (Example : 10V 330F) Radial Lead Type d Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 Size code D+ P 0.5 MAX UVR 1 A 3 3 1 MED Configuration Capacitance tolerance (20%) Rated capacitance (330F) Pressure relief vent (6.3up) L+ MAX 15MIN Rated voltage (10V) 4MIN Series name Type (mm) D 4 5 6.3 8 10 12.5 16 18 20 22 25 P 1.5 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 10.0 12.5 d 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 (L 20) 1.5 (L 20) 2.0 * Please refer to page 20 about the end seal configulation. Configuration D Pb-free leadwire Pb-free PET sleeve 4 DD6 5 6.3 8 * 10 12.5 to 18 20 to 25 DD ED PD HD RD Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS VR series Dimensions Cap.( F) V Code 6.3 10 16 25 35 50 63 0J 1A 1C 1E 1V 1H 1J 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 65 80 95 135 200 270 320 540 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 6.3 x 11 10 x 12.5 65 85 100 145 240 290 350 650 2200 222 10 x 20 1000 10 x 20 1100 12.5 x 20 1300 3300 332 10 x 20 1190 12.5 x 20 1450 12.5 x 25 4700 472 12.5 x 20 1550 12.5 x 25 1800 16 x 25 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 16 6800 682 12.5 x 25 1920 16 x 25 10000 103 16 x 25 2350 16 x 35.5 2700 15000 153 16 x 35.5 2850 18 x 35.5 3100 22000 223 33000 333 18 x 40 22 x 30 22 x 50 25 x 40 20 x 40 25 x 30 22 x 50 25 x 40 Cap.( F) V Code 0.47 1 2.2 3.3 4.7 10 22 33 R47 010 2R2 3R3 4R7 100 220 330 47 470 100 220 101 221 330 331 470 471 1000 102 3350 3200 3900 3800 2250 3700 3300 4500 4800 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 35 55 80 95 115 190 330 440 550 960 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 10 x 12.5 10 x 12.5 10 x 16 12.5 x 20 40 60 90 105 130 210 385 490 650 1150 12.5 x 25 1550 16 x 25 1800 1700 16 x 25 1980 16 x 35.5 2280 2100 16 x 31.5 2450 50 75 90 110 160 260 370 440 790 16 x 35.5 2650 18 x 35.5 20 x 31 20 x 40 25 x 30 22 x 50 25 x 40 2950 3000 3400 3300 4200 4000 25 x 50 4800 18 x 35.5 20 x 31 20 x 40 25 x 30 22 x 50 25 x 40 2900 2700 3000 2900 3800 3600 25 x 50 4500 18 x 35.5 20 x 31 20 x 40 25 x 30 22 x 50 25 x 40 25 x 50 2700 3000 2900 3700 3600 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 12.5 x 25 1.3 2.9 4.3 6.2 17 28 35 40 60 95 125 155 260 430 590 760 1350 5 x 11 5 x 11 6.3 x 11 6.3 x 11 10 x 12.5 10 x 16 10 x 20 12.5 x 20 16 x 25 18 x 35.5 22 x 30 20 x 40 25 x 30 22 x 50 25 x 40 2500 2450 2900 2900 3500 3300 20x40 25x 30 22 x 50 25 x 40 2700 2600 3400 3200 25 x 50 3900 25 x 50 4000 250 315 350 400 450 2E 2F 2V 2G 2W 15 22 33 40 50 80 155 205 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 20 12.5 x 20 15 22 33 40 55 95 170 230 6.3 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 16 12.5 x 20 12.5 x 20 15 22 33 46 55 105 190 230 6.3 x 11 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 12.5 x 20 16 x 25 22 33 55 65 115 190 275 270 12.5 x 20 270 12.5 x 25 300 16 x 25 340 16 x 31.5 530 16 x 35.5 800 18 x 35.5 810 18 x 40 22 x 30 22 x 40 25 x 30 25 x 50 20 x 40 25 x 30 22 x 50 25 x 40 940 900 1410 1290 1900 1130 1090 1490 1550 2.1 4.7 7 10 21 30 40 45 75 130 180 230 370 620 760 1000 1380 2400 2400 25 x 50 2900 Case size Rated D x L (mm) ripple 2D 430 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 20 12.5 x 25 12.5 x 25 16 x 25 18 x 40 22 x 50 25 x 40 4300 200 12.5 x 25 65 100 140 170 300 490 710 900 1300 18 x 35.5 2300 2C 12.5 x 20 2A 16 x 35.5 2100 160 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 16 10 x 20 100 16 x 31.5 520 18 x 35.5 560 20 x 40 22 x 30 22 x 50 25 x 30 740 820 1170 970 22 x 50 25 x 30 850 770 25 x 50 1250 25 x 50 1600 6.3 x 11 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 12.5 x 25 16 x 25 22 38 55 65 115 200 275 8 x 11.5 10 x 12.5 10 x 12.5 10 x 16 12.5 x 20 16 x 25 16 x 31.5 25 45 55 70 130 240 300 16 x 35.5 380 16 x 35.5 370 18 x 40 22 x 30 22 x 50 25 x 40 20 x 40 25 x 30 550 530 25 x 50 750 590 570 850 890 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 16 x 25 16 x 35.5 18 x 40 22 x 30 23 35 45 55 90 165 230 300 290 22 x 40 350 Case size Rated D x L (mm) ripple Rated ripple current (mArms) at 85C 120Hz Size 4x11 is available for capacitors marked " " In this case, 6 will be put at 12th digit of type numbering system " " Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap.(F) Frequency 0.1 to 47000 100 to 47000 1000 to 33000 0.47 to 22000 330 to 10000 50Hz 0.75 0.80 0.85 0.80 0.90 120Hz 1.00 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1.10 1 kHz 1.57 1.34 1.13 1.40 1.13 10kHz or more 2.00 1.50 1.15 1.60 1.15 CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS Trimmed (Cut) or Formed Leads Radial lead type In order to identify correct part number for the processed lead product, cut/formed lead code must be added to bulk part number. If the bulk part number is up to 11th digit, In case 12th digit is alphabet, it shall be: 12 13 14 15 16 12 13 14 processed lead coding shall be as follows: 1 code code In case 12th digit is numeral, it shall be: 12 13 14 code -- 5 6.3 -- -- 3 1.0 -- 4 1.5 -- 5 2.0 -- 6.3 2.5 -- 8 3.5 10 5 12.5 16 -- 5.0 20 -- -- -- 12.5 -- C P All length Same as above. 4.5 -- C C All length Same as above. 4.0 -- C V All length Same as above. 3.5 -- C T All length Same as above. 3.2 -- C M All length Same as above. 3.0 -- 4 5 6.3 8 All length 16 4.5 1.3 5.0 1.8 7.5 18 20 10 22 25 ( 10, 12.5, 16, 18, 20, 22, 25) L0.5 5 12.5 A A ( 4, 5, 6.3, 8) (Code A E ) 1.5 MAX. (Code A A ) 2.5 MAX. 1.1 1.3 10 Snap-in 4.5 P0.5 L0.5 F0.5 5 d Other length 8 x 5 = F: 2.5 Please contact us for the 16 to 25 x 12.5L products. r A A 5mmL,7mmL L0.5 -- 10 25 -- -- 7.5 22 A E P0.5 -- 8 18 Cutting 3.5 F0.5 4 L0.5 d All length -- B A , B B ) 1.5MAX. F A , F V ) 2.5MAX. r C A Other length 8 5 (Code (Code -- -- d F V 5.0 F0.5 5mmL,7mmL 5 6.3 d B B 5 D Other length Lead configurations r -- F0.5 F A Forming and cutting 4 D 5mmL,7mmL D D B A (mm) Dimensions (mm) F L D Configurations Cut / Formed lead code Code Case length 12.5 Lead diameter (d) and lead pitch (P) are subject to capacitor specifications. Conductive polymer aluminum solid electrolytic capacitors : Cutting configurations only End seal Configuration Configuration 3 5 6.3 4 8 10 12.5 16 18 20 22 25 Exception : 5, 6.3 case size of MA, MR, MF, MP, MT, MW, SA, SF, SP, SR, ST, SW, HC (7mmL), PW (7mmL), TT (7mmL), TS (7mmL) series : configration Exception : 6.3 x 6mmL, 6.3 x 9mmL, 8 x 7mmL, 8 x 9mmL, 10 x 8mmL, 10 x 10mmL size of LF LE , LG , LS , LV series, MV, SV, PV series : configration 2 Exception : Conductive polymer aluminum solid electrolytic capacitors 1 CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS Taped Leads for Automatic Insertion Systems Radial lead type (Applicable standard JIS C0806-2) In order to identify correct part number for the taped product, taping code must be added. (mm) Capacitor diameter () Specifications Packaging If the bulk part number is up to 11th digit, taping code shall be as follows: 12 13 14 - + Lead style F Leader Formed lead P0 See Table 1 12.7 3 to 8 1 Ammo-pack code 15.0 12.5 TO 15.0 16, 18 TN (16 x15 to 25, 18 x15 to 25) See Table 2 See Table 2 Notes: Conductive polymer aluminum solid electrolytic capacitors 12 13 14 15 16 Table 1 (Formed lead type) P2 (mm) Formed Lead Type Case Size P Ta pi ng Tolerance 3 x 5 C od e K Item P1 d w w0 H H0 F P0 4 to 8 Case length (5mmL, 7mmL) ( 3 x 5, 4 x 11) ( 5x9 to 8x9, 4x11 to 8x20) 4 to 8 Case length (5mmL), 6.3x6 4 to 6.3 Case length (7mmL), 4 5x9 or more, 6.3x9 or more, 8 x7 or more, 10x8 to 25) ( 12.5 x12.5 to 25) 12.7 In case 12th digit is alphabet, it shall be code Applicable size T E T P T A 4 to 10 See Table 2 Straight lead 12 13 14 Code T P T P T D code In case 12th digit is numeral, it shall be Taping code D0 t 4 x 11 Case dia ( ) x Length (L) 4 x 5 5 x 5 6.3 x 5 8 x 5 4 x 7 5 x 7 6.3 x 7 8 x 7 TP TP TE 0.40 0.45 0.45 ( 8 x 7 : 0.5) 4 x 11 5 x 9 5 x 11 6.3 x 9 6.3 x 11 6.3 x 15 TA TA d Lead-wire diameter 0.05 P Pitch of component 1.0 12.7 12.7 12.7 12.7 12.7 P0 Feed hole pitch 0.2 12.7 12.7 12.7 12.7 12.7 P1 Hole center to lead 0.5 5.1 5.1 3.85 3.85 3.85 P2 1.0 6.35 6.35 6.35 6.35 6.35 F Feed hole center to component center Lead-to-lead distance K Clinch height 0.5 ( 4 x 11 : 0.45) H +0.75 -0.5 18.5 H0 Height of component from tape center Lead-wire clinch height 0.5 16.0 W Tape Width 0.5 W0 Hold down tape width +0.8 -0.2 2.5 2.5 5.0 5.0 5.0 1.5 2.5 1.5 2.5 4.0 18.5 17.5 18.5 20.0 16.0 16.0 16.0 16.0 18.0 18.0 18.0 18.0 18.0 7.0 7.0 7.0 7.0 7.0 MIN 3 D0 Feed hole diameter 0.2 4.0 4.0 4.0 4.0 4.0 t 0.2 0.6 0.6 0.6 0.6 0.6 Total tape thickness Table 2 (mm) Straight Lead Type Case Size P Item F P1 F P0 d w w0 H 4, 5 D0 t 0.6 MAX (Straight lead type) P2 8 x 9 8 x 11.5 8 x 15 8 x 20 Ta pin g Tolerance 4 x 5 4 x 7 5 6.3 Co de 8 x 5 Case dia ( ) x Length (L) 8 x 7 8 10 12.5 16 18 TP TP, TD TP, TD TP TD TD TD TO TN d Lead-wire diameter 0.05 0.45 0.45 0.5, 0.6 0.45 0.5, 0.6 0.45 0.5 0.6 0.6 0.6 0.8 P Pitch of component 1.0 12.7 12.7 12.7 12.7 12.7 12.7 12.7 15.0 30.0 P0 Feed hole pitch 0.2 12.7 12.7 12.7 12.7 12.7 12.7 12.7 15.0 15.0 P1 Hole center to lead 0.5 5.1 5.1 4.6 4.6 3.85 5.0 3.75 P2 1.0 6.35 6.35 6.35 6.35 6.35 7.5 F Feed hole center to component center Lead-to-lead distance +0.8 -0.2 2.5 2.5 3.5 3.5 5.0 5.0 H Height of component from tape center +0.75 -0.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 W Tape Width 0.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 W0 Hold down tape width MIN 7.0 7.0 7.0 7.0 7.0 7.0 7.0 12.5 12.5 D0 Feed hole diameter 0.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 t 0.2 0.6 0.6 0.6 0.7 4 0.6 0.6 0.6 0.7 4 0.6 0.7 4 0.6 0.6 Total tape thickness ( 5.1 1 5.35) 6.35 2.5 1 ( 5.1 1 5.35) 6.35 2.5 1 Special taping specifications on H. F. and K. dimensions other than the above figures are available upon request. Conductive polymer aluminum solid electrolytic capacitors : Straigh lead type only Only the above mentioned dimensions are specified. 7.5 7.5 2 Notes: 1 F = 2.0mm is also available, provided that capacitor case length is less than 9mm. Taping code to be T C . 2 Tolerance on F for 16 and 18 units shall be 0.8mm. 3 Tolerance on Ho for 3 units shall be 16.0 MIN. 4 Conductive polymer aluminum solid electrolytic capacitors CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS (mm) Packaging Ammo-pack (Flat box type) L L 340 340 H 150 200 W 50 50 340 250 50 340 300 50 340 260 54 340 340 340 340 340 200 300 260 200 200 54 54 62 62 65 330 290 65 320 230 65 W + H + - Axial lead type (Applicable standard JIS C0805) The following code shall be put at 12th to 14th digit of the corresponding type number of capacitors. 10 63.5 10 73.0 10 52.4 15 63.5 15 73.0 15 5 6.3 8 5 6.3 8 5 6.3 8 10 13 (except 31.5L) 10 13 10 13 Taping code Q'ty / Reel (pcs.) 1LS 1LV 1LY 1LT 1LW 1LZ Please contact us for complete information on the package 1,600 1,300 1,000 1,600 1,300 1,000 1,600 1,300 1,000 500 350 500 350 500 350 + White tape for positive polarity w1.5 52.4 Case dia () 2 MAX. Dim. P (Component Pitch) D w1.2 2 Dim. W (Tape distance) (mm) 61 Taping Specifications Case Size ( D x L) Q'ty / Box 2,000 3x5 2,000 4 x 5, 4 x 7 2,000 5 x 5, 5 x 7 1,000 8 x 5, 8 x 7, 8 x 8 2,000 6.3 x 5, 6.3 x 6, 6.3 x 7 2,000 4 x 11, 5 x 9, 5 x 11 1,000 8 x 9, 8 x 10, 8 x 11.5, 8 x 12, 8 x 15 500 10 x8, 10 x9, 10 x10, 10 x12.5, 10 x13, 10 x15, 10 x16 2,000 6.3 x 9, 6.3 x 10.5, 6.3 x 11, 6.3 x 15 1,000 8 x 20 500 10 x 20 500 10 x 25 12.5 x 12.5, 12.5 x 15, 12.5 x 20 500 12.5 x 25 250 18 x 15, 18 x 20, 18 x 25 250 16 x 15, 16 x 20, 16 x 25 -- P 0.5 Blue or yellow tape for negative polarity 1.2 MAX. dimensions for tapes axial lead capacitors. CAT.8100Z-1