MC74LCX139DTEL - ON SEMICONDUCTOR

July 2006 Rev 4 1/17

74LCX139

Low voltage CMOS

Dual 2 to 4 decoder / demultiplexer

Features

■5V tolerant inputs

■High speed:

–t

PD = 6.2ns (Max) at VCC = 3V

■Power down protection on inputs and outputs

■Symmetrical output impedance:

–|I

OH| = IOL = 24mA (Min) at VCC = 3V

■PCI bus levels guaranteed at 24mA

■Balanced propagation delays:

–t

PLH ≅ tPHL

■Operating voltage range:

–V

CC (Opr) = 2.0V to 3.6V

■Pin and function compatible with

74 series 139

■Latch-up performance exceeds

500mA (JESD 17)

■ESD performance:

– HBM > 2000V

(MIL STD 883 method 3015); MM > 200V

Description

The 74LCX139 is a low voltage CMOS dual 2 to 4

line Decoder / Demultiplexer fabricated with sub-

micron silicon gate and double-layer metal wiring

C2MOS technology.

It is ideal for low power and high speed 3.3V

applications; it can be interfaced to 5V signal

environment for inputs.

The active low enable input can be used for gating

or as a data input for demultiplexing applications.

While the enable input is held high, all four

outputs are high independently of the other

inputs.

It has same speed performance at 3.3V than 5V

AC/ACT family, combined with a lower power

consumption.

All inputs and outputs are equipped with

protection circuits against static discharge, giving

them 2KV ESD immunity and transient excess

voltage.

SO-16 TSSOP16

www.st.com

Order codes

Part number Package Packaging

74LCX139MTR SO-16 Tape and reel

74LCX139TTR TSSOP16 Tape and reel

Obsolete Product(s) - Obsolete Product(s)

Contents 74LCX139

2/17

Contents

1 Logic symbols and I/O equivalent circuit . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Pin settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1 Pin connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.3 Truth table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.4 Logic diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.1 Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

7 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Obsolete Product(s) - Obsolete Product(s)

74LCX139 Logic symbols and I/O equivalent circuit

3/17

1 Logic symbols and I/O equivalent circuit

Figure 1. IEC logic symbols

Figure 2. Input and output equivalent circuit

Obsolete Product(s) - Obsolete Product(s)

Pin settings 74LCX139

4/17

2 Pin settings

2.1 Pin connection

Figure 3. Pin connection (top through view)

2.2 Pin description

Table 1. Pin description

Pin N° Symbol Name and function

1, 15 1G, 2G Enable inputs

2, 3 1A, 1B Address inputs

4, 5, 6, 7 1Y0 to 1Y3 Outputs

12, 11, 10, 9 2Y0 to 2Y3 Outputs

14, 13 2A, 2B Address inputs

8 GND Ground (0V)

16 VCC Positive supply voltage

Obsolete Product(s) - Obsolete Product(s)

74LCX139 Pin settings

5/17

2.3 Truth table

Note: X : Do not care

2.4 Logic diagram

Figure 4. Logic diagram

Note: This logic diagram has not to be used to estimate propagation delays

Table 2. Truth table

Inputs Outputs

Enable Select

GBAY0

Y1 Y2 Y3

HXXHHHH

LLLLHHH

LLHHLHH

LHLHHLH

LHHHHHL

Obsolete Product(s) - Obsolete Product(s)

Maximum rating 74LCX139

6/17

3 Maximum rating

stressing the device above the rating listed in the “absolute maximum ratings” table may

cause permanent damage to the device. these are stress ratings only and operation of the

device at these or any other conditions above those indicated in the operating sections of

this specification is not implied. exposure to absolute maximum rating conditions for

extended periods may affect device reliability. refer also to the STMicroelectronics sure

program and other relevant quality documents.

3.1 Recommended operating conditions

Table 3. Absolute maximum ratings

Symbol Parameter Value Unit

VCC Supply voltage -0.5 to +7.0 V

VIDC input voltage -0.5 to +7.0 V

VODC output voltage (VCC = 0V) -0.5 to +7.0 V

VODC output voltage (high or low state) (1)

1. IO absolute maximum rating must be observed

-0.5 to VCC + 0.5 V

IIK DC input diode current -50 mA

IOK DC output diode current (2)

2. VO < GND

-50 mA

IODC output current ± 50 mA

ICC DC supply current per supply pin ± 100 mA

IGND DC ground current per supply pin ± 100 mA

Tstg Storage temperature -65 to +150 °C

TLLead temperature (10 sec) 300 °C

Table 4. Recommended operating conditions

Symbol Parameter Value Unit

VCC Supply voltage (1)

1. Truth table guaranteed: 1.5V to 3.6V

2.0 to 3.6 V

VIInput voltage 0 to 5.5 V

VOOutput voltage (VCC = 0V) 0 to 5.5 V

VOOutput voltage (high or low state) 0 to VCC V

IOH, IOL High or low level output current (VCC = 3.0 to 3.6V) ± 24 mA

IOH, IOL High or low level output current (VCC = 2.7V) ± 12 mA

Top Operating temperature -40 to 85 °C

dt/dv Input rise and fall time (2)

2. VIN from 0.8V to 2V at VCC = 3.0V

0 to 10 ns/V

Obsolete Product(s) - Obsolete Product(s)

74LCX139 Electrical characteristics

7/17

4 Electrical characteristics

Table 5. DC specifications

Symbol Parameter

Test condition Value

Unit

VCC

(V)

-40 to 85°C

Min Max

VIH High level input voltage

2.7 to 3.6

2.0 V

VIL Low level input voltage 0.8 V

VOH High level output voltage

2.7 to 3.6 IO=-100 µAV

CC-0.2

2.7 IO=-12 mA 2.2

3.0

IO=-18 mA 2.4

IO=-24 mA 2.2

VOL Low level output voltage

2.7 to 3.6 IO=100 µA0.2

2.7 IO=12 mA 0.4

3.0

IO=16 mA 0.4

IO=24 mA 0.55

IIInput leakage current 2.7 to 3.6 VI = 0 to 5.5V ± 5 µA

Ioff Power OFF leakage

current 0VI or VO = 5.5V 10 µA

ICC Quiescent supply current 2.7 to 3.6

VI = VCC or GND 10

µA

VI or VO= 3.6 to 5.5V ± 10

∆ICC I incr. per Input 2.7 to 3.6 VIH = VCC - 0.6V 500 µA

Table 6. Dynamic switching characteristics

Symbol Parameter

Test condition Value

Unit

VCC

(V)

TA = 25 °C

Min Typ Max

VOLP Dynamic low level quiet

output (1)

1. Number of outputs defined as "n". Measured with "n-1" outputs switching from HIGH to LOW or LOW to

HIGH. The remaining output is measured in the LOW state.

3.3 CL = 50pF

VIL = 0V, VIH = 3.3V

0.8

VOLV -0.8

Obsolete Product(s) - Obsolete Product(s)

Electrical characteristics 74LCX139

8/17

Table 7. AC electrical characteristics

Symbol Parameter

Test condition Value

Unit

VCC

(V)

(pF)

(Ω)

ts = tr

(ns)

-40 to 85 °C

Min Max

tPLH tPHL Propagation

Delay Time A, B

to Y

2.7 50 500 2.5 7.3 ns

3.0 to 3.6 1.0 6.2

tPLH tPHL Propagation

Delay Time G to Y

2.7 50 500 2.5 5.8 ns

3.0 to 3.6 1.0 5.3

tOSLH

tOSHL

Output To Output

Skew Time (1) (2)

1. Skew is defined as the absolute value of the difference between the actual propagation delay for any two

outputs of the same device switching in the same direction, either HIGH or LOW (tOSLH = | tPLHm - tPLHn|,

tOSHL = | tPHLm - tPHLn|)

2. Parameter guaranteed by design

3.0 to 3.6 50 500 2.5 1.0 ns

Table 8. Capacitive characteristics

Symbol Parameter

Test condition Value

Unit

VCC

(V)

TA = 25 °C

Min Typ Max

CIN Input capacitance 3.3 VIN = 0 to VCC 6pF

CPD

Power dissipation

capacitance (1)

1. CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the

operating current consumption without load. (Refer to Test Circuit). Average operating current can be

obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC

3.3 fIN = 10MHz

VIN = 0 or VCC

26 pF

Obsolete Product(s) - Obsolete Product(s)

74LCX139 Test circuit

9/17

5 Test circuit

Figure 5. Test circuit

CL = 50pF or equivalent (includes jig and probe capacitance)

RL = 500

Ω

or equivalent

RT = ZOUT of pulse generator (typically 50

Ω

)

Obsolete Product(s) - Obsolete Product(s)

Waveforms 74LCX139

10/17

6 Waveforms

Figure 6. Propagation delay for inverting outputs (f = 1MHz; 50% duty cycle)

Figure 7. Propagation delay for non-inverting outputs (f = 1MHz; 50% duty cycle)

Obsolete Product(s) - Obsolete Product(s)

74LCX139 Package mechanical data

11/17

7 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK®

packages. These packages have a Lead-free second level interconnect . The category of

second level interconnect is marked on the package and on the inner box label, in

compliance with JEDEC Standard JESD97. The maximum ratings related to soldering

conditions are also marked on the inner box label. ECOPACK is an ST trademark.

ECOPACK specifications are available at: www.st.com

Obsolete Product(s) - Obsolete Product(s)

Package mechanical data 74LCX139

12/17

DIM.

mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 1.75 0.068

a1 0.1 0.25 0.004 0.010

a2 1.64 0.063

b 0.35 0.46 0.013 0.018

b1 0.19 0.25 0.007 0.010

C 0.5 0.019

c1 45° (typ.)

D 9.8 10 0.385 0.393

E 5.8 6.2 0.228 0.244

e 1.27 0.050

e3 8.89 0.350

F 3.8 4.0 0.149 0.157

G 4.6 5.3 0.181 0.208

L 0.5 1.27 0.019 0.050

M 0.62 0.024

S8° (max.)

SO-16 MECHANICAL DATA

0016020D

Obsolete Product(s) - Obsolete Product(s)

74LCX139 Package mechanical data

13/17

DIM.

mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 1.2 0.047

A1 0.05 0.15 0.002 0.004 0.006

A2 0.8 1 1.05 0.031 0.039 0.041

b 0.19 0.30 0.007 0.012

c 0.09 0.20 0.004 0.0079

D 4.9 5 5.1 0.193 0.197 0.201

E 6.2 6.4 6.6 0.244 0.252 0.260

E1 4.3 4.4 4.48 0.169 0.173 0.176

e 0.65 BSC 0.0256 BSC

K0˚ 8˚0˚ 8˚

L 0.45 0.60 0.75 0.018 0.024 0.030

TSSOP16 MECHANICAL DATA

PIN 1 IDENTIFICATION

A1 L

0080338D

Obsolete Product(s) - Obsolete Product(s)

Package mechanical data 74LCX139

14/17

DIM.

mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 330 12.992

C 12.8 13.2 0.504 0.519

D 20.2 0.795

N 60 2.362

T 22.4 0.882

Ao 6.45 6.65 0.254 0.262

Bo 10.3 10.5 0.406 0.414

Ko 2.1 2.3 0.082 0.090

Po 3.9 4.1 0.153 0.161

P 7.9 8.1 0.311 0.319

Tape & Reel SO-16 MECHANICAL DATA

Obsolete Product(s) - Obsolete Product(s)

74LCX139 Package mechanical data

15/17

DIM.

mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 330 12.992

C 12.8 13.2 0.504 0.519

D 20.2 0.795

N 60 2.362

T 22.4 0.882

Ao 6.7 6.9 0.264 0.272

Bo 5.3 5.5 0.209 0.217

Ko 1.6 1.8 0.063 0.071

Po 3.9 4.1 0.153 0.161

P 7.9 8.1 0.311 0.319

Tape & Reel TSSOP16 MECHANICAL DATA

Obsolete Product(s) - Obsolete Product(s)

Revision history 74LCX139

16/17

8 Revision history

Table 9. Revision history

Date Revision Changes

15-Sep-2004 3 Ordering Codes Revision - pag. 1.

27-Jul-2006 4 New template, temperature ranges updated

Obsolete Product(s) - Obsolete Product(s)

74LCX139

17/17

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the

right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any

time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no

liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this

document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products

or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such

third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS

OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT

RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING

APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,

DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE

GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void

any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any

liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America

www.st.com

Obsolete Product(s) - Obsolete Product(s)