ar y in D-PAK TO-251AA A K G New D-PAK Sensitive SCRs (4 - 10 Amps) 11 General Description Teccor's new line of D-PAK sensitive SCR semi-conductors are half-wave, unidirectional, gate-controlled rectifiers.These devices are offered with current ratings of 4 -10 amps and voltage ratings of 100-600 volts, with three gate sensitivities: 50, 200, and 500 microamperes. These sensitive SCRs are very useful in applications where high gain is required. Gate currents of microamperes control load currents of several amperes. Teccor's D-PAK SCRs are available in a choice of two packages as shown above, surface mount (SMT) TO-252AA and through hole TO-251AA. The sturdy built assembled SCRs have copper connections going directly to the die without any intermediate wiring. for custom design applications. Please consult factory for more information. Tape-and-reel capability is available for through hole TO-251AA. The TO-252AA is furnished in pocket / embossed tape on reels. Features These SCRs from Teccor Electronics are part of a broad line of thyristor products with robust surge current capabilities. * This new line of devices is designed for high volume, low cost AC power applications such as controllers for motor loads, tools, ground fault circuits, alarms, and general line voltage switching. * All Teccor SCRs have glass-passivated junctions to ensure long term device reliability and permanent stability. Teccor's glass offers a rugged, reliable barrier against junction contamination.Variations of devices covered in this data sheet are available Teccor Electronics 972-580-7777 * * * Surface mount package TO-252AA and through hole TO-251AA Glass-passivated junctions ensure long device reliability and parameter stability Sensitive gate input Voltage capability -- up to 600 Volts Surge capability -- up to 100 Amps http://www.teccor.com -1 New D-PAK Sensitive lim Pr e D-PAK TO-252AA Preliminary Thyristor Product Catalog (OHFWULFDO6SHFLILFDWLRQV Part No. Surface Mount IT Through Hole Maximum On-State Current (9) TYPE VDRM & VRRM IGT IDRM & IRRM VTM VGT Repetitive Peak Off-State Forward & Reverse Voltage DC Gate Trigger Current VD = 6VDC RL = 100 (5) Peak Off-State Current Gate Open VDRM = Max Rated Value (2) Peak On-State Voltage at Max Rated RMS Current TC = 25C DC Gate Trigger Voltage VD = 6VDC RL = 100 (4) Amps MAX 50 200 50 200 50 200 50 200 50 200 50 200 50 200 50 200 200 500 200 500 200 500 200 500 200 500 200 500 200 500 200 500 200 500 200 500 200 500 200 500 200 500 200 500 200 500 200 500 mAmps TC = TC = 25C 110C MAX MAX .002 0.10 .002 0.10 .002 0.10 .002 0.10 .002 0.10 .002 0.10 .002 0.10 .002 0.10 .002 0.10 .002 0.10 .002 0.10 .002 0.10 .002 0.10 .002 0.10 .002 0.10 .002 0.10 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 .005 0.25 Amps 4 Amps 6 Amps 8 Amps TO-252AA D-PAK TO-251AA D-PAK Non Isolated S1004DS1 S1004DS2 S2004DS1 S2004DS2 S4004DS1 S4004DS2 S6004DS1 S6004DS2 Non Isolated S1004VS1 S1004VS2 S2004VS1 S2004VS2 S4004VS1 S4004VS2 S6004VS1 S6004VS2 S1006DS2 S1006DS3 S2006DS2 S2006DS3 S4006DS2 S4006DS3 S6006DS2 S6006DS3 S1006VS2 S1006VS3 S2006VS2 S2006VS3 S4006VS2 S4006VS3 S6006VS2 S6006VS3 S1008DS2 S1008DS3 S2008DS2 S2008DS3 S4008DS2 S4008DS3 S6008DS2 S6008DS3 http://www.teccor.com -2 S1008VS2 S1008VS3 S2008VS2 S2008VS3 S4008VS2 S4008VS3 S6008VS2 S6008VS3 IT(RMS) IT(AV) 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 Volts MIN 100 100 200 200 400 400 600 600 100 100 200 200 400 400 600 600 100 100 200 200 400 400 600 600 100 100 200 200 400 400 600 600 100 100 200 200 400 400 600 600 100 100 200 200 400 400 600 600 Volts MAX 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 TC = 40C MAX 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Volts TC = 25C MAX 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 TC = 110C MIN 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Teccor Electronics 972-580-7777 Preliminary IH IGM VGRM PGM PG(AV) ITSM Holding Current Gate Open Initial on State Current = 20mA (6) Peak Gate Current (1) Peak Reverse Gate Voltage Peak Gate Power Dissipation (1) Average Gate Power Dissipation Peak One Cycle Surge (3)(7)(9) dv/dt Critical Rate-ofApplied Voltage Amps mAmps MAX 4.0 6.0 4.0 6.0 4.0 6.0 4.0 6.0 4.0 6.0 4.0 6.0 4.0 6.0 4.0 6.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 Amps 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Teccor Electronics 972-580-7777 Volts MIN 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 di/dt tgt tq I2t Maximum Rate-ofChange of On-State Current IGT = 150mA With 0.1s Rise Time Gate Controlled Turn-OnTime Gate Pulse=10mA Min. Width=15s 0.1s Rise Time Circuit Commulated Turn-Off Time (8) RMS Surge (NonRepetitive) On-State Current for Period of 8.3ms for Fusing Amps/Sec Sec TYP 3.0 4.0 3.0 4.0 3.0 4.0 3.0 4.0 3.0 4.0 3.0 4.0 3.0 4.0 3.0 4.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 Sec MAX 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 45 50 45 50 45 50 45 50 45 50 45 50 45 50 45 50 45 50 45 50 45 50 45 50 45 50 45 50 45 50 45 Amps2Sec Volts/Sec Watts Watts 60Hz 50Hz 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 TC = 110C TYP 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 8 8 8 8 10 10 10 10 8 8 8 8 10 10 10 10 8 8 8 8 10 10 10 10 8 8 8 8 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 http://www.teccor.com -3 New D-PAK Sensitive Thyristor Product Catalog Preliminary Thyristor Product Catalog (OHFWULFDO6SHFLILFDWLRQV Part No. Surface Mount IT Through Hole Maximum On-State Current (9) TYPE VDRM & VRRM IGT IDRM & IRRM VTM VGT Repetitive Peak Off-State Forward & Reverse Voltage DC Gate Trigger Current VD = 6VDC RL = 100 (5) Peak Off-State Current Gate Open VDRM = Max Rated Value (2) Peak On-State Voltage at Max Rated RMS Current TC = 25C DC Gate Trigger Voltage VD = 12VDC RL = 60 (4) mAmps Amps 10 Amps TO-252AA D-PAK TO-251AA D-PAK Non Isolated S1010DS2 S1010DS3 S2010DS2 S2010DS3 S4010DS2 S4010DS3 S6010DS2 S6010DS3 Non Isolated S1010VS2 S1010VS3 S2010VS2 S2010VS3 S4010VS2 S4010VS3 S6010VS2 S6010VS3 IT(RMS) IT(AV) 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 Volts MIN 100 100 200 200 400 400 600 600 100 100 200 200 400 400 600 600 mAmps MAX 200 500 200 500 200 500 200 500 200 500 200 500 200 500 200 500 TC = 25C MAX .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 Volts TC = 110C MAX 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 TC = -40C MAX 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Volts MAX 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 TC = 25C MAX 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 TC = 110C MIN 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Electrical Specification Notes (8) (9) 1.5 VGT VGT (TC = 25C) Pulse width 10s. TC = TJ for test conditions in off-state. For more than one full cycle rating, see Figure 1.2 See Figure 1.1 for VGT vs TC See Figure 1.6 for IGT vs TC See Figure 1.5 for IH vs TC 4.0A devices also have a pulse peak forward current on-state rating (repetitive) of 75A. This rating applies for operation at 60Hz, 75C maximum tab (or anode) lead temperature, switching from 80V peak, sinusoidal current pulse width of 10s minimum, 15s maximum. Test conditions as follows: TC 80C, rectangular current waveform; rate-of-rise of current 10A/s. Rate-of-reversal of current 5A/s. ITM = 1A (50s pulse) Repetition Rate = 60pps. VRRM = Rated. VR = 15V minimum, VDRM = Rated. Rate-of-rise reapplied forward blocking voltage = 5V/s. Gate Bias = 0V, 100 (during turn-off time interval) See Figure 1.3 and 1.4 for current rating at specified operating case temperature. 1.0 .5 Ratio of (1) (2) (3) (4) (5) (6) (7) 0 -40 -15 +25 Figure 1.1 100 10 AM 80 P DE 60 50 40 VICE S 30 8 AM 4 AM General Notes * * * * All measurements are made at 60Hz with a resistive load at an ambient temperature of +25C unless otherwise specified. Operating temperature range (TJ) is -40C to +110C Storage temperature range (TS) is -65C to +150C Lead solder temperature is a maximum of 230C for 10 seconds maximum; 1/16" (1.59mm) from case. The case temperature (TC) is measured as shown on dimensional outline drawings. See mechanical specifications on page 6 of this data sheet. http://www.teccor.com -4 +105 +125 Normalized DC Gate-Trigger Voltage vs Case Temperature 20 * +65 Case Temperature (TC) - C P DE VICE S P DE VICE S 6 AM P DE VICE S 10 8 6 5 4 GATE CONTROL MAY BE LOST DURING AND IMMEDIATELY FOLLOWING SURGE CURRENT INTERVAL. OVERLOAD MAY NOT BE REPEATED UNTIL JUNCTION TEMPERATURE HAS RETURNED TO STEADY-STATE RATED VALUE. 3 2 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS ON-STATE CURRENT: [IT(RMS)]: MaxRated Value at Specified Case Temperature 1 1 2 3 4 5 6 7 8 10 20 30 40 60 80 100 200 300 400 600 1000 Surge Current Duration - Full Cycles Figure 1.2 Peak Surge Current vs Surge Current Duration Teccor Electronics 972-580-7777 Preliminary IH IGM VGRM PGM PG(AV) Holding Current Gate Open Initial on State Current = 20mA (6) Peak Gate Current (1) Peak Reverse Gate Voltage Peak Gate Power Dissipation (1) Average Gate Power Dissipation ITSM dv/dt Peak One Cycle Surge (3)(9) Critical Rate-ofApplied Voltage Amps mAmps MAX 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 6.0 8.0 Amps Volts MIN 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Volts/Sec Watts Watts 60Hz 50Hz 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 TC = 110C TYP 10 10 10 10 8 8 8 8 10 10 10 10 8 8 8 8 di/dt tgt tq I2t Maximum Rate-ofChange of On-State Current IGT = 150mA With 0.1s Rise Time Gate Controlled Turn-OnTime Gate Pulse=100mA Min. Width=15s IGT = 50mA 0.1s Rise Time Circuit Commulated Turn-Off Time (8) RMS Surge (NonRepetitive) On-State Current for Period of 8.3ms for Fusing Amps/Sec Sec TYP 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 Sec MAX 50 45 50 45 50 45 50 45 50 45 50 45 50 45 50 45 Amps2Sec 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 130 130 120 Maximum Allowable Case Temperature (TC) - C 110 100 90 4 6A AM MP P Maximum Allowable Case Temperature (TC) - C 120 80 10 8A AM P MP CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawings 70 60 110 100 90 4 AM P 80 8A 6A MP MP 10 A MP CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawings 70 60 50 0 50 0 2 4 6 8 10 2 4 6 8 Average On-State Current [IT(AV)] - Amps 12 RMS On-State Current [IT(RMS)] - Amps Figure 1.3 Maximum Allowable Case Temperatrue vs RMS On-State Current Teccor Electronics 972-580-7777 Figure 1.4 Maximum Allowable Case Temperatrue vs Average OnState Current http://www.teccor.com -5 New D-PAK Sensitive Thyristor Product Catalog Preliminary Thyristor Product Catalog 0HFKDQLFDO6SHFLILFDWLRQV TO-252AA D-PAK Surface Mount INCHES DIM A B C D E F G H J K L M N O P TO-251AA D-PAK Through Hole MIN .236 MAX .244 MILLIMETERS MIN MAX 6.00 6.20 .379 .409 9.63 10.39 .176 .184 4.47 4.67 .035 .050 0.89 1.27 .087 .093 2.21 2.36 .027 .033 0.69 0.84 .205 .213 5.21 5.41 .251 .261 6.38 6.63 .040 .050 1.02 1.27 .086 .094 2.18 2.39 .026 .036 0.66 0.91 .018 .023 0.46 0.58 .170 .180 4.32 4.57 .002 .010 0.05 0.25 .018 .023 0.46 0.58 INCHES DIM A B C D E F G H J K L MIN .040 MAX .050 MILLIMETERS MIN MAX 1.02 1.27 .236 .244 6.00 6.20 .350 .375 8.89 9.53 .205 .213 5.21 5.41 .251 .261 6.38 6.63 .027 .033 0.69 0.84 .087 .093 2.21 2.36 .086 .094 2.18 2.39 .018 .023 0.46 0.58 .036 .042 0.91 1.07 .018 .023 0.46 0.58 9.0 Ratio of IH IH(TC = 25C) See General Notes for specific operating temperature range. 3.0 2.0 IGT IGT (TC = 25C) 4.0 7.0 Ratio of 8.0 3.0 See General Notes for specific device operating temperature range. 6.0 5.0 4.0 2.0 1.0 1.0 0 -65 0 -65 -40 -15 +25 +65 -40 -15 +25 +65 +110 +125 Case Temperature (TC) - C +110 +125 Case Temperature (TC) - C Figure 1.5 Normalized DC Holding Current vs Case Temperature http://www.teccor.com -6 Figure 1.6 Normalized DC Gate - Trigger Current vs Case Temperature Teccor Electronics 972-580-7777