AV series Security pushbutton switches Bushing O 16 (.629) - momentary (NO) ORDER FORMAT Series Bush./act. Function config. AV 3 Case style Contact matl. Term. type Bush./act. material 0 C 9 00 06 16 08 NO (function 3) K See "options" page. SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 200mA 48 VDC - 100mA 48VDC * Initial contact resistance : 50 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame * Electrical life : 50.000 cycles at 200mA 48VDC 100.000 cycles at 100mA 48VDC * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 6 mm (.236) max. * Operating temperature : -30C to +70C * Mechanical life : 1.000.000 cycles * Packaging unit : 60 pieces * Case : PBT * Contacts : brass, silver plated (C) * Bushing and actuator : nickel plated brass (std) CUT-OUT * Panel cut-out : O 16,2 (.637) * Min. pitch for matrix mounting : 24 mm x 24 mm (.944 x .944) All model numbers below are for switches with standard bushing/actuator material, without marking. BASIC MODEL Hex nut 19 (.748) across flats Flat actuator - screw terminals - AV06 3.00 (.118) o12.00 (.472DIA) o18.00 (.708DIA) AV0630C900 o16.00X1.00 SI (.629DIAX1.00 IS) 3.00 (.118) 1.50 (.059) 9.50 (.374) 11.20 (.440) Screw terminals for wires 1,5 mm2 max. OTHER CONFIGURATIONS AV1630C900 B-96 2.00 (.078) 1.50 (.059) Curved actuator w. chamfer 3.00 (.118) Curved actuator 1.50 (.059) B Sealing AV0830C900 www.apem.com APEM AV series Security pushbutton switches Options After selecting basic model number, fill in last 3 boxes with desired options. Series Bush./act. config. Case style Function Contact matl. Term. type Bush./act. Marking Sealing material AV BUSHING/ACTUATOR MATERIAL For non-standard material, replace 00 with one of the following codes. ** Option 80 not available on models with dia. 16 mm (.629) bushing Flat or curved metal actuator CODE BUSHING ACTUATOR 00 (standard) 10 12 20 30 40 80 ** Nickel plated brass Nickel plated brass Nickel plated brass Chrome plated brass Chrome plated brass Stainless steel Varnished polished brass Nickel plated brass Stainless steel Chrome plated brass Chrome plated brass Stainless steel Stainless steel Varnished polished brass B Flat thermoplastic actuator (not available with dia. 16 mm (.629) bushing) CODE BUSHING ACTUATOR COLOUR 0* (standard) 2* 8* Nickel plated brass Chrome plated brass Varnished polished brass Replace * with one of the following codes. 1 : blue - 2 : black - 3 : green - 4 : grey 5 : yellow - 6 : red - 7/1: white - 9 : orange Select an option from each of the two tables below. MARKING For flat or curved actuator. Not available on model AV031202C00. - by engraving on brass actuator (stainless steel on request) - by hot stamping on thermoplastic actuator. O15.00 (0.590DIA) TYPE OF MARKING CODE TYPE 0 to 9 X Y A to N P to W 0 Numbers 0 to 9 Symbol * Symbol # Letters A to N Letters P to W Letter O CODE 8.00 (0.314) Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces 1.50 (0.059) COLOUR OF MARKING COLOUR Brass actuator 0 (standard) 2 Same as finish Black Note : a finished product supplied in version "0" cannot be modified to version "2". Thermoplastic actuator 2 Black 7 White SEALING Blank No sealing 1 1 2 2 K Frontal panel sealing (IP65) elastomeric membrane external gasket internal gasket external gasket For types with bushing O 16 APEM K Front panel sealing (IP65) For types with bushing O 19 or O 22 www.apem.com B-103