B-96 APEM www.apem.com
AV series
Security pushbutton switches
Bushing Ø 16 (.629) - momentary (NO)
B
Curved actuator w. chamfer
AV0830C900
Curved actuator
AV1630C900
3.00
1.50
(.059)
(.118)
NO
(function 3)
SPECIFICATIONS
•Max. current/voltage rating with resistive load :
200mA 48 VDC - 100mA 48VDC
• Initial contact resistance : 50 mΩmax.
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
•Electrical life : 50.000 cycles at 200mA 48VDC
100.000 cycles at 100mA 48VDC
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Mechanical life : 1.000.000 cycles
• Packaging unit : 60 pieces
MATERIALS
• Case : PBT
• Contacts : brass, silver plated (C)
• Bushing and actuator : nickel
plated brass (std)
CUT-OUT
• Panel cut-out :
Ø 16,2 (.637)
• Min. pitch for matrix mounting :
24 mm x 24 mm (.944 x .944)
ORDER FORMAT
Series Bush./act.
config. Function Case
style Contact
matl. Term.
type Bush./act.
material
See ”options” page.
K
Sealing
AV
06
16
08
3 0 C 9 00
Flat actuator - screw terminals - AV06 Hex nut 19 (.748) across flats
(.708DIA)
ø18.00
(.374)
9.50
1.50
(.059)
ø12.00
(.472DIA)
(.440)
11.20
(.118)
3.00 (.118)
3.00
(.629DIAX1.00 IS)
ø16.00X1.00 SI
AV0630C900
BASIC MODEL
OTHER CONFIGURATIONS
(.059)
1.50
(.078)
2.00
All model numbers below are for switches with standard bushing/actuator material, without marking.
Screw terminals for wires 1,5 mm2max.
APEM www.apem.com B-103
AV series
Security pushbutton switches
Options
B
Flat or curved metal actuator ** Option 80 not available on models with dia. 16 mm (.629) bushing
CODE BUSHING ACTUATOR
00 (standard) Nickel plated brass Nickel plated brass
10 Nickel plated brass Stainless steel
12 Nickel plated brass Chrome plated brass
20 Chrome plated brass Chrome plated brass
30 Chrome plated brass Stainless steel
40 Stainless steel Stainless steel
80 ** Varnished polished brass Varnished polished brass
Flat thermoplastic actuator (not available with dia. 16 mm (.629) bushing)
CODE BUSHING ACTUATOR COLOUR
0•(standard) Nickel plated brass
2•Chrome plated brass
8• Varnished polished brass
BUSHING/ACTUATOR MATERIAL
Replace • with one of the following codes.
1: blue - 2: black - 3: green - 4: grey
5: yellow - 6: red - 7/1: white - 9: orange
For flat or curved actuator.
Not available on model AV031202C00.
- by engraving on brass actuator
(stainless steel on request)
- by hot stamping on thermoplastic
actuator.
COLOUR OF MARKING
CODE COLOUR
Brass actuator
0 (standard) Same as finish
2Black
Note : a finished product supplied in
version “0” cannot be modified to
version "2".
Thermoplastic actuator
2Black
7White
TYPE OF MARKING
CODE TYPE
0 to 9 Numbers 0 to 9
XSymbol *
YSymbol #
A to N Letters A to N
P to W Letters P to W
0Letter O
Letter O : same code and same design as
number 0.
For special symbols, consult factory.
Minimum order : 500 pieces
(0.059)
1.50
(0.314)
8.00
(0.590DIA)
Ø15.00
MARKING Select an option from each of the two tables below.
For non-standard material, replace 00 with one of the following codes.
After selecting basic model number,
fill in last 3 boxes
with desired options.
Series Bush./act.
config. Case
style Function Contact
matl. Term.
type Bush./act.
material Marking Sealing
AV
KFront panel sealing (IP65)
1
2
1
2
SEALING
➀elastomeric membrane
➁external gasket
➀internal gasket
➁external gasket
Blank No sealing
For types with bushing Ø 19 or Ø 22
KFrontal panel sealing (IP65)
For types with bushing Ø 16
