• Plated brass bezel finished in bright chrome, black or satin
grey and moulded polycarbonate rear body
MATERIALS
• Max Reverse Voltage: 5 V
• Viewing Angle: 30–100° (dependant on model)
• Life Expectancy: 100,000 hours
• Torque: 4 cNm (dependent on option)
• Maximum panel thickness 11 mm
GENERAL SPECIFICATIONS
The company reserves the right to change specifications without notice.
10 mm colored diffused epoxy lens or 10 mm water clear
super bright LEDs
Prominent and flush bezel styles
(2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long)
wire terminations
Custom engraving available
DISTINCTIVE FEATURES
• IP67 sealing option (EN60529)
• Operating & Storage Temperature Range:
Rear plastic body: -30 °C to +65° C ( -22 °F to +149 °F)
Rear epoxy body: -40 °C to +85° C ( -40 °F to +185 °F)
ENVIRONMENTAL SPECIFICATIONS
Q14 series
Ø14 mm panel mount LED indicators
MOUNTING
All LED characteristics are dependent upon environmental conditions. Therefore published data
should be considered nominal and subject to variations. 1
LED INDICATORS
IND-Q14-1807
Ø14 mm panel mount LED indicators
Q14 series
ELECTRICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
(Min to Max) (Typical All
Types)
02 (No Resistor) 1.8 to 3.3 VDC 20 mA max
6 VDC 5.4 to 6.6 VDC 20 mA
12 VDC 10.8 to 13.2 VDC 20 mA
24 VDC 21.6 to 26.4 VDC 20 mA
28 VDC 25.2 to 30.8 VDC 20 mA
110 VAC 99 to 121 VAC 6 mA
220 VAC 207 to 235 VAC 3 mA
* Customer to supply resistor for desired operating
current.
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed Flush Forward Voltage
HE Red 80 mcd 10 mcd 2.0 V
Green 60 mcd 5 mcd 2.2 V
Yellow 50 mcd 4 mcd 2.1 V
Blue 540 mcd 100 mcd 3.3 V
White 1000 mcd 150 mcd 3.3 V
Orange 80 mcd 200 mcd 2.2 V
Bi-color (Typical)
(Red/Green) 15/15 mcd 14/10 mcd 2.0V/2.2 V
Tri-color (Typical)
(Red/Green/Yellow) 60/50/50mcd 15/10/30 mcd 2.0 V/2.2 V/2.1 V
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is
produced.
STANDARD LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed Flush Forward Voltage
HE Red 17,000 mcd 2,000 mcd 2.2 V
Green 11,000 mcd 680 mcd 3.3 V
Yellow 4,000 mcd 350 mcd 2.0 V
Blue 2,500mcd 250 mcd 3.3 V
White 4,400 mcd 250 mcd 3.3 V
Orange 2,800 mcd 300 mcd 2.2 V
SUPER BRIGHT LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed Flush Forward Voltage
HE Red 2,800 mcd 800 mcd 2.1 V
Green 2,200 mcd 250 mcd 3.2 V
Yellow 1,300 mcd 250 mcd 2.0 V
Orange 850 mcd 200 mcd 2.1 V
HYPER BRIGHT LED INTENSITY
• The operating voltage must not be exceeded by more that
10% as this will result in reduced life expectancy
• Luminous intensity is measured at 20 mA on a discrete led
unless otherwise stated.
• Luminous intensities and color shades of white LEDs may
vary within a batch.
• Luminous intensity will be reduced with lower operating
current.
2
LED INDICATORS
BUILD YOUR PART NUMBER
Ø14 mm panel mount LED indicators
Q14 series
ABOUT THIS SERIES
Notice: please note that not all combinations of above numbers are available.
• Gold faston terminal denotes anode (+), silver terminal denotes
cathode (-)
• Standard wire length is 200 mm, 22 AWG UL1061, red wire
denotes anode (+), black wire denotes cathode (-) for other wire
lengths consult APEM
• For LEDs with alternative voltages and mutlit-voltage options
consult APEM
• 110 VAC and 220 VAC, short body terminal options, 5, 6 and 7
please consult the factory
• Bi-color leds, by connecting the gold faston (+) one color
is produced, by reversing the supply voltage another color is
produced – bi-colors are available up to 28 VDC
• Take care when soldering to the faston terminals (recommended
solder temperature 300 °C - 3 sec)
• Short body pins and wires are only available up to 28 VDC
• The Tri-color LED has red and green LEDs when both are
connected yellow is produced
• Standard tri-color faston terminals are two anodes (+) and one
cathode (-)
• Tri-color wires are one red (+) and one green (+) anode and one
black (-) cathode
• Tri-color pins are center (–) cathode, shortest (+) anode pin
green, longest (+) anode pin red
• We recommend using Hyperbright or Superbright LEDs for use
at 110 VAC and 220 VAC
LED COLOR
XX Fixed Light
KK Flashing Light
(12V – 28VDC)
YY Bi-color
ZZ Tri-color
TYPE OF ILLUMINATION
02 no resistor
06 6VDC
12 12VDC
12A 12VAC/DC
24 24VDC
24A 24VAC/DC
28 28VDC
28A 28VAC/DC
110 110VAC
220 220VAC
VOLTAGE
(Blank) Unsealed
EIP67
SEALING
RRed
GGreen
YYellow
BBlue
WWhite
OOrange
HR Hyper Bright
Red
HG Hyper Bright
Green
HY Hyper Bright
Yellow
HO Hyper Bright
Orange
SR Super Bright
Red
SG Super Bright
Green
SY Super Bright
Yellow
SB Super Bright
Blue
SW Super Bright
White
RG Red/Green
RY Red/Yellow
GY Green/Yellow
RYG Red/Yellow/
Green
SERIES
Q
MOUNTING HOLE
14 Ø14mm
PProminent
RRecessed
FFlush
BEZEL STYLE
1Solder Lug/
Fastons (2.8 x 0.8)
2Pins
3Wires
4Rear epoxy Pins
5Rear epoxy Wires
6Short body Pins
7Short body Wires
TERMINALS BEZEL FINISH
OTHERS
CBright Chrome
BBlack
GSatin Grey
ANODIZED
FLUSH
AR Red
AG Green
AY Yellow
AB Blue
AN Black
3
LED INDICATORS
PROMINENT BEZEL
WIRES
REAR EPOXY WIRES
SHORT BODY WIRES
PINS
REAR EPOXY PINS
SHORT BODY PINS
SOLDER LUG/FASTON
Ø14 mm panel mount LED indicators
Q14 series
LED INDICATORS
4
FLUSH BEZEL SOLDER LUG/FASTON
WIRES
REAR EPOXY WIRES
SHORT BODY WIRES
PINS
REAR EPOXY PINS
SHORT BODY PINS
Ø14 mm panel mount LED indicators
Q14 series
5
LED INDICATORS
WIRES
REAR EPOXY WIRES
SHORT BODY WIRES
PINS
REAR EPOXY PINS
SHORT BODY PINS
SOLDER LUG/FASTON
RECESSED BEZEL
Ø14 mm panel mount LED indicators
Q14 series
LED INDICATORS
6
Ø14 mm panel mount LED indicators
Q14 series
CUSTOM ENGRAVING
High beam
-0AJ
Low beam
-097 Rear fog
-027
Front fog
-026
Ventilator
fan
-023
Windscreen
wiper
-021
Windscreen
washer
-022
Turn Signal
-0AH
Side lights
-098
Horn
-041
Hazard
warning
-013
Arrow
-0K6
Heating
-018
Brake test
-0BU
Some common codes are listed above, for your custom requirements please contact APEM.
Unless specified standard engraving with white infill will be supplied.
Suffix the part number with legend code :
Steam
-0ST
ECU
ECU
-0EU
Side step
-0AD
Air con
-012
Engine
-040
Boot/Trunk
Release
-0BR
Battery
-0AG
Oil can
-0GP
Windscreen
heating
-020
ABS
ABS
-086
USB
connection
-0UB
Engine coil
-0EL
Seat belt
-0SB
CABLE LENGTH AND CONNECTOR
For custom cable length and
connectors contact APEM.
7
LED INDICATORS
