Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI710RCE OPI7320, OPI7320RCE, OPI7340, OPI7340RCE Features: * 6 kV electrical isolation * Inexpensive plastic housing * Choice of phototransistor or photodarlington output * UL registered File No. E8730* Product Photo Here Description: Each OPI7002 and OPI7010 consists of an infrared emitting diode coupled to a NPN silicon phototransistor. The LED and sensor are encased in a black, low-cost plastic housing. Pin spacing is compatible with standard dual-inline packages. Each OPI7320 and OPI7340 consists of an infrared emitting diode coupled to a NPN silicon photodarlington. The LED and sensor are encased in a high dielectric plastic housing. Pin spacing is compatible with standard dual-inline packages. The RCE versions reverses the Phototransistor Emitter and Collector pin-out. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Ordering Information Applications: * * * * * Requiring high voltage isolation between input and output Electrical isolation in dirty environments Part Number OPI7002 Industrial equipment Medical equipment OPI7010 Office equipment OPI7320 OPI7340 OPI7002, OPI7010 2 1 1 4 OPI7320, OPI7340 2 3 1 4 RoHS Isolation CTR IF (mA) Voltage Min Typ / Max (,000) Sensor 890 nm Transistor 6 890 nm or 935 nm Darlington 6 20 100 200 400 VCE (Volts) Max Lead Length / Spacing 10 / 50 30 0.30" / 0.30" 5 / 50 15 0.30" / 0.30" OPI7002RCE, OPI7010RCE 2 3 LED Peak Wavelength 3 Pin # LED 2 1 Cathode Anode Pin # Transistor/ RCE 3 4 Collector / Emitter Emitter / Collector 4 OPI7320RCE, OPI7340RCE 2 3 1 4 DIMENSIONS ARE IN: [MILLIMETERS] INCHES OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 03/07 Page 1 of 3 Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI710RCE OPI7320, OPI7320RCE, OPI7340, OPI7340RCE Absolute Maximum Ratings (TA = 25 C unless otherwise noted) Operating Temperature Range -40 C to +85 C Storage Temperature Range -40 C to +85 C (1)(2) 6 kVDC Input-to-Output Isolation Voltage ](3) Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron 260 C Input Diode Forward DC Current 50 mA Peak Forward current (1 s pulse width, 300 pps) 3A Reverse Voltage 2V Power Dissipation (3) 100 mW Output Phototransistor Collector-Emitter Voltage OPI7002, OPI7010, OPI7002RCE, OPI7010RCE OPI7320, OPI7340, OPI7320RCE, OPI7340RCE 30 V 15 V Emitter-Collector Voltage 5.0 V Power Dissipation (3) 100 mW Notes: (1) Measured with input leads and output leads shorted. (2) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (3) Derate linearly 1.66 mW/ C above 25 C. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 03/07 Page 2 of 3 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI710RCE OPI7320, OPI7320RCE, OPI7340, OPI7340RCE Electrical Characteristics (TA = 25 C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP140 or OP240 for additional information--for reference only) VF Forward Voltage - 1.2 1.70 V IF = 10 mA IR Reverse Current - - 100 A VR = 2.0 V Output Phototransistor (OPI7002, OPI7010) (See OP550 for additional information--for reference only) Output Photodarlington (OPI7320, OPI7340) (See OP560 for additional information--for reference only) V(BR)CEO V(BR)ECO ICEO Collector-Emitter Breakdown Voltage OPI7002/RCE, OPI7010/RCE OPI7320/RCE, OPI7340/RCE 30 15 - - V Emitter-Collector Breakdown Voltage 5 - - V Collector-Emitter Dark Current - - 100 nA 20 100 200 400 - - % IC = 100 A, IF = 0 IE = 100 A, IF = 0 VCE = 10 V, IF = 0 Coupled IC/ IF DC Current Transfer Ratio OPI7002, OPI7002RCE OPI7010, OPI7010RCE OPI7320, OPI7320RCE OPI7340, OPI7340RCE V(SAT) Collector-Emitter Saturation Voltage OPI7002/RCE, OPI7010/RCE OPI7320/RCE, OPI7340/RCE - - 0.4 1.0 V VISO Isolation Voltage(1) 6 - - kVDC T(ON) Turn-On Time OPI7002/RCE, OPI7010/RCE OPI7320/RCE, OPI7340/RCE - 4 150 - T(OFF) Turn-Off Time OPI7002/RCE, OPI7010/RCE OPI7320/RCE, OPI7340/RCE - 3 125 - - 0.2 - CIO Capacitance Input-to-Output(1) IF = 10 mA, VCE = 5 V IF = 10 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 0.50 mA IF = 5 mA, IC = 2 mA See note 1 s VCE = 10 V, IC = 10 mA, RL = 100 pF VIO = 0, F = 1 MHz Notes: (1) Measured with input leads and output leads shorted. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 03/07 Page 3 of 3