Dimensions in millimeters and inches
Conforms to JEDEC Outline DO - 204AR
CASE STYLE AND DIMENSIONS
Major Ratings and Characteristics
IF(AV) Rectangular 5 A
waveform
VRRM range 60/ 100 V
IFSM @ tp = 5 µs sine 1900 A
VF@
5 Apk, TJ
= 125°C 0.52 V
TJrange - 55 to 175 °C
Characteristics Values Units
Description/ Features
The 50SQ...G axial leaded Schottky rectifier series has been
optimized for low reverse leakage at high temperature. The
proprietary barrier technology allows for reliable operation up
to 175°C junction temperature. Typical applications are in
switching power supplies, converters, free-wheeling diodes,
and reverse battery protection.
175° C TJ operation
High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
SCHOTTKY RECTIFIER 5 Amp
50SQ...G
Bulletin PD-20807 11/05
IF(AV) = 5 Amp
VR = 60/ 100V
Document Number: 93356
www.vishay.com
1
50SQ...G Series
Bulletin PD-20807 11/05
VFM Max. Forward Voltage Drop (1) 0.66 V @ 5A
* See Fig. 1 0.77 V @ 10A
0.52 V @ 5A
0.62 V @ 10A
IRM Max. Reverse Leakage Current (1) 0.15 mA TJ = 25 °C
* See Fig. 2 7 mA TJ = 125 °C
CTMax. Junction Capacitance 500 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25 °C
LSTypical Series Inductance 10 nH Measured lead to lead 5mm from body
dv/dt Max. Voltage Rate of Change 10000 V/ µs
(Rated VR)
TJ = 25 °C
TJ = 125 °C
VR = rated VR
Parameters 50SQ Units Conditions
Electrical Specifications
TJMax. Junction Temperature Range -55 to 175 °C
Tstg Max. Storage Temperature Range -55 to 175 °C
RthJL Max. Thermal Resistance Junction 8.0 °C/W DC operation * See Fig. 4
to Lead 1/8 inch lead leangth
RthJA Typical Thermal Resistance, 44 °C/W
Junction to Air
wt Approximate Weight 1.4(0.049) g (oz.)
Case Style DO - 204AR JEDEC
Marking Device 50SQ100G
Thermal-Mechanical Specifications
Parameters 50SQ Units Conditions
(1) Pulse Width < 300µs, Duty Cycle < 2%
IF(AV) Max. Average Forward Current 5 A 50% duty cycle @ TC = 119° C, rectangular wave form
* See Fig. 5
IFSM Max. Peak One Cycle Non-Repetitive 1900 5µs Sine or 3µs Rect. pulse
Surge Current * See Fig. 7 290 10ms Sine or 6ms Rect. pulse
EAS Non-Repetitive Avalanche Energy 7.5 mJ TJ
= 25 °C, IAS
= 1.0 Amps, 46 µs square pulse
IAR Repetitive Avalanche Current 1.0 A Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Parameters 50SQ Units Conditions
Absolute Maximum Ratings
A
Part number 50SQ060G 50SQ080G 50SQ100G
VRMax. DC Reverse Voltage (V) 60 80 100
VRWM Max. Working Peak Reverse Voltage (V)
Voltage Ratings
Following any rated
load condition and
with rated VRRM applied
Document Number: 93356
www.vishay.com
2
50SQ...G Series
Bulletin PD-20807 11/05
Fig. 2 - Typical Values of Reverse Current
Vs. Reverse Voltage
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage
Fig. 4 - Maximum Thermal Impedance ZthJL Characteristics
Fig. 1 - Maximum Forward Voltage Drop Characteristics
0.0001
0.001
0.01
0.1
1
10
100
020406080100
R
R
T = 175°C
150°C
125°C
100°C
75°C
50°C
25°C
J
Reverse Voltage - V (V)
Re v e r se C u r r e n t - I ( m A )
100
1000
020406080100
T = 25°C
J
R
T
Reverse Voltage - V (V)
Junction Capacitance - C (pF)
0.1
1
10
100
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
Instantaneous Forward Current - I (A)
Forward Voltage Drop - V (V)
F
FM
T = 175°C
T = 125°C
T = 25°C
J
J
J
0.01
0.1
1
10
0.00001 0.0001 0.001 0.01 0.1 1 10 100
t , Rectangular Pulse Duration (Seconds)
Single Pulse
(Thermal Resistance)
1
Thermal Impedance Z C/W)
Not es:
1. Duty factor D = t / t
2. Pea k T = P x Z + T
12
J C
DM
thJL
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
thJL
= 1/ 8 inc h
2
t
1
t
P
DM
Document Number: 93356
www.vishay.com
3
50SQ...G Series
Bulletin PD-20807 11/05
Fig. 8 - Unclamped Inductive Test Circuit
Fig. 5 - Maximum Allowable Case Temperature
Vs. Average Forward Current
Fig. 6 - Forward Power Loss Characteristics
Fig. 7 - Maximum Non-Repetitive Surge Current
FREE- W HEEL
DIODE
40HFL40S02
C URRENT
MONITOR
HI G H- SPEED
SWITCH
IRFP460
L
DUT
Rg = 25 ohm
Vd = 25 Volt
+
145
150
155
160
165
170
175
02468
DC
Allowable Case Te mpe rat ure - (°C )
F( A V )
R (DC) = 8.0°C/ W
thJL
Average Forward Current - I (A)
= 1/ 8 inch
0
0.5
1
1.5
2
2.5
3
3.5
012345678
DC
Average Power Loss - (Watts)
F( A V )
D = 0.08
D = 0.17
D = 0.25
D = 0.33
D = 0.50
RM S Li m i t
Average Forward Current - I (A)
100
1000
10000
10 100 1000 10000
FSM
p
Non-Repetitive Surge Current - I (A)
At Any Rated Load Condition
And With Rated V Applied
Following Surge
RRM
Square Wave Pulse Duration - t (microsec)
Document Number: 93356
www.vishay.com
4
50SQ...G Series
Bulletin PD-20807 11/05
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
11/05
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level.
Qualification Standards can be found on IR's Web site.
Ordering Information Table
Device Code
15
24
3
1- Current Rating (5A)
2- S = DO-204AR package
3- Q = Schottky Q.. Series
4- Voltage Ratings
5- G = Schottky Generation
6-y None = Box (500 pieces)
y TR = Tape & Reel (1200 pieces)
7-y none = Standard Production
y PbF = Lead-Free
50 S Q 100 G TR -
100 = 100V
080 = 80V
060 = 60V
67
Document Number: 93356
www.vishay.com
5
Legal Disclaimer Notice
Vishay
Document Number: 99901 www.vishay.com
Revision: 12-Mar-07 1
Notice
The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of
International Rectifier’s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the
products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below.
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or
anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
International Rectifier®, IR®, the IR logo, HEXFET®, HEXSense®, HEXDIP®, DOL®, INTERO®, and POWIRTRAIN®
are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product
names noted herein may be trademarks of their respective owners.