SMS3927-023LF - Skyworks Solutions

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200040 Rev. F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • February 23, 2006 1

Surface Mount Schottky Quad Mixer Diodes

DATA SHEET

Features

●Tight parameter distribution

●Available as ring quads, crossover quads, bridge quads

and octoquads

●100% DC tested

●Designed for high-volume commercial applications

●Available in tape and reel packaging

●Available lead (Pb)-free and RoHS-compliant

Description

Skyworks offers a series of low-cost devices in a SOT-143

package. This series includes low, medium and high barrier junc-

tions as ring quads, crossover quads and bridge quads. Octoquad

rings are also offered for high dynamic range applications. These

devices are constructed utilizing Skyworks monolithic chip tech-

nology, assuring uniformity of electrical characteristics for each

junction. The low capacitance of Skyworks ring and crossover

quads is optimal for double balanced mixer applications covering

wireless frequencies into C-band. The bridge quads are desig-

nated for modulators and frequency multiplier applications.

These diodes are 100% DC tested and deliver tight parameter

distribution, minimizing performance variability. They compliment

Skyworks product line of Schottky singles and pairs available in

SC-70, SC-79, SOD-323, SOT-23 and SOT-143 packages.

Available in tape and reel for pick-and-place manufacturing.

Characteristic Value

Reverse voltage (VR) Rated VB

Forward current - steady state (IF) 50 mA

Power dissipation (PD) 75 mW

Storage temperature (TST) -65 °C to +150 °C

Operating temperature (TOP) -65 °C to +150 °C

Junction temperature (TJ) 150 °C

Soldering temperature 260 °C for 5 seconds

ESD human body model Class 1B

Absolute Maximum Ratings

Skyworks offers lead (Pb)-free, RoHS (Restriction of

Hazardous Substances)-compliant packaging.

NEW

Performance is guaranteed only under the conditions listed in the specifications table and is

not guaranteed under the full range(s) described by the Absolute Maximum specifications.

Exceeding any of the absolute maximum/minimum specifications may result in permanent

damage to the device and will void the warranty.

CAUTION: Although this device is designed to be as robust as

possible, ESD (Electrostatic Discharge) can damage

this device. This device must be protected at all times

from ESD. Static charges may easily produce poten-

tials of several kilovolts on the human body or

equipment, which can discharge without detection.

Industry-standard ESD precautions must be employed

at all times.

VB@ 0 V VF∆∆VFRT(1)

@ 10 µA 1 MHz @ 1 mA @ 1 mA @ 10 mA SOT-143

(V) (pF) (mV) (mV) (ΩΩ)Crossover

Barrier Min. Max. Max. Ring Quad Crossover Quad Bridge Quad Octoquad Octoquad

Low 2 0.3–0.5 200–270 10 8 SMS3926-022 SMS3926-023 SMS3929-021

Marking: SE4 Marking: SE5 Marking: SQE

SMS3926-022LF SMS3926-023LF SMS3929-021LF

Marking: XE4 Marking: XE5 Marking: XQE

Medium 2 0.3–0.5 310–370 10 8 SMS3927-023 SMS3930-021

Marking: SJ5 Marking: SRE

SMS3927-023LF SMS3930-021LF

Marking: XJ5 Marking: XRE

High 4 0.3–0.5 520–580 10 8 SMS3928-023 SMS3931-021

Marking: SK5 Marking: SSE

SMS3928-023LF SMS3931-021LF

Marking: XK5 Marking:XSE

High 8 0.3–0.5 1000–1200 20 16 SMS3940-026

Dual- Marking: STG

Junction SMS3940-026LF SMS3940-029LF

Marking: XTG Marking: XTN

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

February 23, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200040 Rev. F

DATA SHEET • SURFACE MOUNT SCHOTTKY QUAD MIXER DIODES

SPICE Model Parameters (Per Junction)

SMS3928

SMS3926 SMS3927 SMS3931

Parameter Unit SMS3929 SMS3930 SMS3940

IS A 2.5E-07 1.3E-09 9E-13

RSΩ44 4

N 1.04 1.04 1.04

TT s 1E–11 1E–11 1E–11

CJ0 pF 0.42 0.39 0.39

M 0.32 0.37 0.42

EGeV 0.69 0.69 0.69

XTI 2 2 2

FC0.5 0.5 0.5

BVV23 4

IBV A 1E–05 1E–05 1E–05

VJV 0.495 0.595 0.8

All parameters are based upon a single junction.

Electrical Specifications at 25 °C (Per Junction)

1. RTis the slope resistance.

All parameters are based upon a single leg.

LF denotes lead (Pb)-free, RoHS-compliant packaging option as an alternative to our

standard tin/lead (Sn/Pb) packaging.

Innovation to GoTM

Select Linear Products (indicated by ) now available for purchase online.

DATA SHEET • SURFACE MOUNT SCHOTTKY QUAD MIXER DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200040 Rev. F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • February 23, 2006 3

Typical Forward Voltage Characteristics at 25 °C

Part Number

VF@ 0.01 mA (mV) VF@ 0.1 mA (mV) VF@ 1 mA (mV) VF@ 10 mA (mV)

Typ. Typ. Typ. Typ.

SMS3926 100 165 232 324

SMS3927 206 271 338 428

SMS3928 423 488 555 641

SMS3940 862 989 1123 1304

SOT-143

0.110 (2.80 mm) Min.

0.120 (3.04 mm) Max.

0.083 (2.10 mm) Min.

0.104 (2.64 mm) Max.

0.012 (0.30 mm) Min.

0.020 (0.50 mm) Max.

0.0005 (0.01 mm) Min.

0.004 (0.15 mm) Max.

0.031 (0.80 mm) Min.

0.047 (1.20 mm) Max.

0.030 (0.76 mm) Min.

0.035 (0.89 mm) Max.

0.047 (1.20 mm) Min.

0.055 (1.40 mm) Max.

0.003 (0.08 mm) Min.

0.008 (0.20 mm) Max.

0.022 (0.55 mm) Ref.

8˚ Max.

0.020 (0.50 mm) Ref.

0.028 (0.70 mm) Ref.

0.068 (1.72 mm) Ref.

0.076 (1.92 mm) Ref.

Recommended Solder Reflow Profiles

Refer to the “Recommended Solder Reflow Profile”

Application Note.

ape and Reel Information

Refer to the “Discrete Devices and IC Switch/Attenuators

Tape and Reel Package Orientation” Application Note.

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

February 23, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200040 Rev. F

DATA SHEET • SURFACE MOUNT SCHOTTKY QUAD MIXER DIODES

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided

by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and

Conditions of Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any

damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.

Skyworks, the Skyworks symbol, “Breakthrough Simplicity” and “Innovation to Go” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-

party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at