FL2600156 - PSE TECHNOLOGY

August 2017

FL SERIES

Document Number DS40067 Rev 2 All specifications are subject to change without notice.

ADVANCED INFORMATION

Miniature Quartz Crystal Ceramic SMD

FL Series Quartz Crystal Legacy NKS3 Series

3.2 x 2.5mm

A product Line of

Diodes Incorporated

3.2 x 2.5mm Ceramic SMD

Product Description

The 4-pad FL series seam seal devices incorporate

a sub-miniature AT-cut crystal resonator housed

in a standard 3.2 x 2.5mm ceramic package.

These compact crystals are ideal for surface

mounting in densely populated or small form-

factor PCB applications.

Product Features

•Rugged AT-cut crystal construction

•Miniature 3.2 x 2.5mm ceramic package

•Available on tape & reel; 8mm tape,

3000 units per reel

•Pb-free and RoHS/Green compliant

Typical Applications

•GSM, CDMA, GPRS

•PCMCIA Cards

•Portable / hand-held PCs

•Notebook PC

•HDD

•GPS

•Bluetooth

•Wireless LAN

•UWB

•ZigBee

•Digital Tuner

2.5 ± 0.1

3.2 ± 0.1

0.68 ± 0.1

0.7

0.1

1.01.2

0.9

Package: (Scale: none; dimensions are in mm)

Recommended Land Pattern:

CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.

1.6

2.1

1.5

1.2

Part Ordering Information:

FL XXX YYYY A: Product�Family

B: XXX = Frequency�Code

C: YYYY = Specification�Code

Following the above format, Saronix-eCera part numbers will be assigned upon

confirmation of exact customer requirements.

Pin Functions:

Pin Function

1Xtal

2Case

3Xtal

4Case

August 2017

FL SERIES

Document Number DS40067 Rev 2 All specifications are subject to change without notice.

Miniature Quartz Crystal Ceramic SMD

FL Series Quartz Crystal

Legacy NKS3 Series | 3.2 x 2.5mm

A product Line of

Diodes Incorporated

Legacy Ordering Information - For Reference Only:

SaRonix Series Designator

NKS = 4 pad seam seal

Package Type

3 (3.2 x 2.5 mm typ)

Calibration / Stability / Temp Range

HAA = ±10 ppm / ±10 ppm / -20°C to +70°C

JAB = ±20 ppm / ±20 ppm / -20°C to +70°C

NAD = ±30 ppm / ±30 ppm / -20°C to +70°C

NAK = ±30 ppm / ±50 ppm / -20°C to +70°C

NED = ±30 ppm / ±30 ppm / -40°C to +85°C

NEK = ±30 ppm / ±50 ppm / -40°C to +85°C

Packing Method

(T) = Tape & Reel, full reel

increments only, 3000pcs

Blank = Bulk

Load Capacitance

–XX = Load Capacitance

NKS 3 NAD 1 – 25.0000 –20 (T)

Frequency

Frequencies (in MHz) = xx.xxxx

Mode

1 = Fundamental

Part Number Example:

Spec: Freq 18.1234MHz, ±30ppm calib, ±30ppm stab, -20 to +70°C, 16pF, T&R = NKS3NAD1-18.1234-16(T)

Frequency Range:

• 8 MHz to 66.0000 MHz (Fundamental)

Characteristics at 25°C ±2°C:

• Frequency Calibration Tolerance: ±10ppm, ±20ppm, or

±30ppm

• Load Capacitance: 8 to 32pF or Series Resonance

• Effective Series Resistance (ESR):

500Ω max (8 to 11.9 MHz)

80Ω max (12 to 19.9 MHz)

60Ω max (20 to 29.9 MHz)

40Ω max (30 to 66 MHz)

• Drive Level: 10µW typ. (100µW max)

• Shunt Capacitance: 5pF Max

Temperature Range:

• Operating: –20 to +70°C or –40 to +85°C or –40 to

+125° C

• Storage: –55 to +125°C

Temperature Stability:

•±10ppm, ±20ppm, ±30ppm, or ±50ppm (–20 to +70°C)

•±30ppm, or ±50ppm (–40 to +85°C)

•±50ppm, or ±70ppm (–40 to 125°C)

Aging at 25°C, First Year:

• ±3ppm Max

Reow Temperature:

• 260°C Max, 10 seconds Max

Mechanical

•Shock: JESD22-B104 Condition B

•Solderability: J-STD-002

•Terminal Strength: MIL-STD-883 Method 2004

•Vibration: JESD22-B103

•Solvent Resistance: JESD22-B107

•Resistance to Soldering Heat: J-STD-020C Table 5-2 Pb-free

devices (3 cycles max)

Environmental

•Gross Test Leak: JESD22-A109, Condition C

•Fine Test Leak: JESD22-A109, Condition A1

•Moisture Resistance: JESD22-A113

•Insulation Resistance: 500 MΩ min (100 VDC)