H3DK-M1 AC/DC24-240 - OMRON

Top of page

Home Our Strengths Products Technical Support Global Network About Us

Home > Products > Product Category > Control Components > Timers > Analog Timers > H3DK-M / -S > Item list >H3DK-M1 AC/DC24-240

OMRON Corporation Sitemap Terms of Use Privacy Policy

Image

Analog Timer, DC24 to 240V, AC24 to 240V

Rated supply voltage 24 to 240VAC 50/60 Hz

24 to 240VDC ripple: 20% max.

Input signals Start

Input method Voltage input

Control output （（ Type）） Relay output (SPDT)

Item list of H3DK-M / -S

As of November 11, 2015

Rated supply voltage 24 to 240VAC 50/60 Hz

24 to 240VDC ripple: 20% max.

Operating voltage range 85% to 110% of rated supply voltage

Input signals Start

Input method Voltage input

Voltage input High (logic) level: 20.4 to 264 VAC/DC

Low (logic) level: 0 to 2.4 VAC/DC

Minimum input signal width 50 ms min. (Start input)

Power consumption (

Relay ON )

4.5VA(at 240 VAC)

1.1W(at 24 VDC)

Power consumption (

Relay OFF )

(at 240 VAC)

(at 24 VDC)

Reset voltage 10% max. of rated supply voltage

Number of time ranges 8

Time ranges 0.1s～1.2s / 1s～12s / 10s～120s / 1min～12min / 10min～120min / 1h～12h / 10h～

120h / 100h～1200h

Operating mode ON delay, Flicker OFF start, Flicker ON start, Signal ON/OFF delay, Signal OFF delay,

Interval, Signal ON/OFF delay, One shot output

Control output （（ Type）） Relay output (SPDT)

Control output （（ Contact

output））

Switching capacities (resistive load (cos (phi) = 1)): 250VAC 5A / 30VDC 5A

Switching capacities (resistive load (cos (phi) = 1)): 250VAC 5A / 125VDC 0.15A

Switching capacities (resistive load (cos (phi) = 1)): 250VAC 5A / 125VDC 0.1A

Minimum applicable load: 10 mA at 5 VDC (failure level: P)

Ambient temperature Operating: -20 to 55

Storage: -40 to 70

Ambient humidity 使用時: 25～85%

Accuracy of operating time +/- 1% max.(FS)

（+/- 1% +/- 10 ms max. in a range of 1.2 s）

Setting error -10 to 10% +/- 0.05 s max. (FS)

Influence of voltage +/- 0.5% FS max. (+/- 0.5% +/- 10 ms max. in a range of 1.2 s)

Influence of temperature +/- 2% FS max. (+/- 2% +/- 10 ms max. in a range of 1.2 s)

Insulation resistance 100 MΩ (at 500 VDC)

Dielectric strength

between current carrying metal parts and non-current carrying metal parts: 2000 VAC,

50/60 Hz for 1 min

between control output terminals and operating circuit: 2000 VAC, 50/60 Hz for 1 min

between non-continuous contacts: 1000 VAC, 50/60 Hz for 1 min

Impulse withstand voltage between power terminals: 5 kV

between exposed non-current-carrying metal parts: 5 kV

Noise immunity +/- 1.5 kV (between power terminals), square-wave noise by noise simulator (pulse

width: 100 ns/1 us, 1-ns rise)

Static immunity Mulfunction: 4 kV Destruction: 8 kV

Vibration resistance

(Destruction)

10 to 55 Hz, 0.75 mm single amplitude each in X, Y, and Z directions for 2 hours

Vibration resistance

(Malfunction））

10 to 55 Hz, 0.5 mm single amplitude each in X, Y, and Z directions for 10 min

Shock resistance

(Destruction））

1000 m/s**2, 3 times each 6 directions

Shock resistance

(Malfunction））

100 m/s**2, 3 times each 6 directions

Mechanical life expectancy

(relayoutput)

10000000 operations min. (under no load at 1800 operations/h)

Electrical life expectancy

(relay output)

100000 operations min. (5 A at 250 VAC, resistive load at 360 operations/h)

Degree of protection IP30(Terminal Block: IP20)

Weight (Main) Approx. 120 g

As of November 11, 2015

Series

about this Product

Inquiry of this Product

English

Print Page

H3DK-M1 AC/DC24-240

Multi-range, Multi-mode Timer

Ratings/Performance Dimensions Block diagram Terminal arrangement Time ranges

Operating chart

Multi-range, Multi-mode

Timer

H3DK-M / -S

Catalog

Global Contact