Option A1, Option A2 T-1 (3 mm) Right Angle LED Indicators Data Sheet Description Features Avago T-1 Right Angle Indicators are industry standard status indicators that incorporate a T-1 LED lamp in a black plastic right angle mount housing. The indicators are available in Standard Red, High Efficiency Red, Orange, Yellow, and High Performance Green, with or without an integrated current limiting resistor. These products are designed to be used as back panel diagnostic indicators and card edge logic status indicators. * * * * Ordering Information To order other T-1 High Dome Lamps in Right Angle Housings in addition to the parts indicated above, select the base part number and add the option code A1 or A2, depending on the lead shear desired. For example, by ordering HLMP-1302 Option A1, you would receive the uneven leads option. By ordering HLMP-1302 Option A2, you would receive the even leads option. Ideal for card edge status indication Package design allows flush seating on a PC board May be side stacked on 4.57 mm (0.18") centers LEDs available in All LED colors, with or without integrated current limiting resistor in T-1 packages * Easy flux removal design * Housing material meets UL 94V-0 rating * Additional catalog lamps available as options Absolute Maximum Ratings and Other Electrical/Optical Characteristics The absolute maximum ratings and typical device characteristics are identical to those of the T-1 LED lamps. For information about these characteristics, see the data sheets of the equivalent T1 LED lamp. Package Dimensions 2.41 (0.095) REF. 3.68 (0.145) DIA. 3.18 (0.125) 5.21 (0.206) 4.95 (0.195) 6.43 (0.253) 6.27 (0.247) 7.44 (0.293) 7.29 (0.287) CATHODE OPTION CATHODE LEAD NO. LENGTH A1 16.0 (0.630) MIN. SEE TABLE 2.54 (0.100) NOM. 4.65 (0.183) MAX. 1.27 (0.060) NOM. A2 4.70 (0.185) REF. For product information and a complete list of distributors, please go to our website: 0.46 (0.018) SQUARE NOM. 3.43 (0.135) MIN. ANODE LEAD LENGTH 1.27 (0.050) UNSHEARED NOM. LONGER UNEVEN LEADS THAN CATHODE 3.43 (0.135) SHEARED MIN. EVEN LEADS NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. WHITE DOTTING ON THE SIDE OF THE HOUSING BODY FOR ALL RESISTOR LAMPS (HLMP-16xx & HLMP-36xx). www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright (c) 2008 Avago Technologies Limited. All rights reserved. Obsoletes 5988-3716EN AV02-0780EN - February 25, 2008