02820.9-08 - STEGO - Datasheet.Live

TOUCH-SAFE PTC FAN HEATER

CSF 028 | 250 W, 400 W

The CSF 028 fan heater prevents formation of condensation and provides evenly distributed interior air tempe

rature

in enclosures. The touch-safe plastic housing and the small size makes it ideal for use in enclosures with a high

packing density. The heater is equipped with a ﬁxed set point thermostat and is easily wired via external pressure

clamps.Two different mounting options are available - DIN rail or screw tabs. The robust screw tab mounting is

particularly suitable for applications with high vibration.

> Compact size

> Integrated pre-set thermostat

> Quiet operation

> Heating power adjusts to ambient

temperature

> DIN rail or screw tab mount available

¹ at 68 °F (20 °C) ambient temperature; ² tolerance of ±5 K

Note: Other Switch-off and Switch-on temperatures on request

CSF 028 with DIN clip

CSF 028 with screw mount tabs

TECHNICAL DATA

Heating element PTC resistor - temperature limiting

Surface temperature 250 W: max. 122 °F (50 °C), 400 W: max. 149 °F (65 °C)

each except upper protective grille at 68 °F (20 °C) ambient

temperature

Overheat protection built-in temperature limiter

Axial fan, ball bearing service life 40,000 h at 104 °F (+40 °C)

Axial fan, free blowing 32 cfm (54 m³/h) @ AC 120 V; 26 cfm (45 m³/h) @ AC 230 V

Connection 2-pole dual pressure clamp for solid wire AWG 14 max. (2.5mm²),

stranded wire (with wire end ferrule) AWG 16 max. (1.5 mm²)

Housing plastic according to UL 94V-0, black

Mounting clip for 35 mm DIN rail, EN 60715 or screw mount (Ø 5.5 mm),

clamping torque 2 Nm max., washers must be used

Mounting position vertical airﬂow (air outlet up), horizontal airﬂow

Dimensions models with DIN clip: 4.13 x 3.35 x 4.65" (105 x 85 x 118 mm),

models w/ screw tabs: 4.13 x 4.53 x 4.25" (105 x 115 x 108 mm)

Weight 17.6 oz. (500 g)

Operating / Storage temperature -40 to +158 °F (-40 to +70 °C) / -49 to +158 °F (-45 to +70 °C)

Operating / Storage max. 90 %RH (non-condensing)

Protection class / Protection type II (double insulated) / IP20

Approvals UL File No. E150057, VDE

Part No. -

DIN mount

Part No. -

screw tab mount

Operating voltage Heating

capacity¹

Inrush current

max.

Pre-fuse T

(time-delay)

Switch-off temperature² Switch-on temperature²

02821.9-06 02821.9-08 AC 120 V, 50/60 Hz 250 W 6 A 10 A 59 °F (15 °C) 41 °F (5 °C)

02821.9-09 02821.9-11 AC 120 V, 50/60 Hz 250 W 6 A 10 A 77 °F (25 °C) 59 °F (15 °C)

02820.9-06 02820.9-08 AC 120 V, 50/60 Hz 400 W 9 A 10 A 59 °F (15 °C) 41 °F (5 °C)

02820.9-09 02820.9-11 AC 120 V, 50/60 Hz 400 W 9 A 10 A 77 °F (25 °C) 59 °F (15 °C)

02821.0-06 02821.0-08 AC 230 V, 50/60 Hz 250 W 9 A 10 A 59 °F (15 °C) 41 °F (5 °C)

02821.0-09 02821.0-11 AC 230 V, 50/60 Hz 250 W 9 A 10 A 77 °F (25 °C) 59 °F (15 °C)

02820.0-06 02820.0-08 AC 230 V, 50/60 Hz 400 W 15 A 16 A 59 °F (15 °C) 41 °F (5 °C)

02820.0-09 02820.0-11 AC 230 V, 50/60 Hz 400 W 15 A 16 A 77 °F (25 °C) 59 °F (15 °C)

www.stegousa.com08.08.2014 | Speciﬁcations are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its ﬁnal application.

Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com