TGL 41-6.8 ... TGL 41-200A TGL 41-6.8C ... TGL 41-200CA Surface Mount unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden fur die Oberflachenmontage Peak pulse power dissipation - Impuls-Verlustleistung 400 W Nominal breakdown voltage Nominale Abbruch-Spannung 6.8...200 V Plastic case MELF - Kunststoffgehause MELF DO-213AB Weight approx. - Gewicht ca. 0.12 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Dimensions / Mae in mm Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Suffix "C" or "CA" for bidirectional types see page 18 siehe Seite 18 Suffix "C" oder "CA" fur bidirektionale Typen Maximum ratings and Characteristics Grenz- und Kennwerte Peak pulse power dissipation (10/1000 :s waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 :s) TA = 25 /C PPPM Steady state power dissipation Verlustleistung im Dauerbetrieb TA = 25 /C PM(AV) 1 W 2) Peak forward surge current, 60 Hz half sine-wave Stostrom fur eine 60 Hz Sinus-Halbwelle TA = 25/C IFSM 40 A 3) Max. instantaneous forward voltage Augenblickswert der Durchlaspannung IF = 25A VF < 3.5 V 3) Operating junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS - 50...+150/C - 50...+150/C Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA < 45 K/W 2) Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Kontaktflache RthT < 10 K/W 400 W 1) 1 ) Non-repetitive current pulse see curve IPPM = f (tr) Hochstzulassiger Spitzenwert eines einmaligen Strom-Impulses, siehe Kurve IPPM = f (tr) 2 ) Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad) an jedem Anschlu 3 ) Unidirectional diodes only - nur fur unidirektionale Dioden 01.04.2000 265 TGL 41-6.8 ... TGL 41-200A TGL 41-6.8C ... TGL 41-200CA Maximum ratings Type Typ Grenzwerte Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) tested at / gemessen bei 10 mA TGL 41-6.8 TGL 41-6.8A TGL 41-7.5 TGL 41-7.5A TGL 41-8.2 TGL 41-8.2A TGL 41-9.1 TGL 41-9.1A TGL 41-10 TGL 41-10A TGL 41-11 TGL 41-11A TGL 41-12 TGL 41-12A TGL 41-13 TGL 41-13A TGL 41-15 TGL 41-15A TGL 41-16 TGL 41-16A TGL 41-18 TGL 41-18A TGL 41-20 TGL 41-20A TGL 41-22 TGL 41-22A TGL 41-24 TGL 41-24A TGL 41-27 TGL 41-27A TGL 41-30 TGL 41-30A TGL 41-33 TGL 41-33A TGL 41-36 TGL 41-36A TGL 41-39 TGL 41-39A TGL 41-43 TGL 41-43A TGL 41-47 TGL 41-47A 6.8 10% 6.8 5% 7.5 10% 7.5 5% 8.2 10% 8.2 5% 9.1 10% 9.1 5% 10 10% 10 5% 11 10% 11 5% 12 10% 12 5% 13 10% 13 5% 15 10% 15 5% 16 10% 16 5% 18 10% 18 5% 20 10% 20 5% 22 10% 22 5% 24 10% 24 5% 27 10% 27 5% 30 10% 30 5% 33 10% 33 5% 36 10% 36 5% 39 10% 39 5% 43 10% 43 5% 47 10% 47 5% VBR [V] 6.12...7.48 *) 6.45...7.14 *) 6.75...8.25 *) 7.13...7.88 *) 7.38...9.02 *) 7.79...8.61 *) 8.19...10.0 8.65...9.55 9.0...11.0 9.5...10.5 9.9...12.1 10.5...11.6 10.8...13.2 11.4...12.6 11.7...14.3 12.4...13.7 13.5...16.5 14.3...15.8 14.4...17.6 15.2...16.8 16.2...19.8 17.1...18.9 18.0...22.0 19.0...21.0 19.8...24.2 20.9...23.1 21.6...26.4 22.8...25.2 24.3...29.7 25.7...28.4 27.0...33.0 28.5...31.5 29.7...36.3 31.4...34.7 32.4...39.6 34.2...37.8 35.1...42.9 37.1...41.0 38.7...47.3 40.9...45.2 42.3...51.7 44.7...49.4 Max. stand-off voltage Max. Sperrspannung at / bei ID VWM [V] 5.5 5.8 6.0 6.4 6.6 7.0 7.3 7.7 8.1 8.5 8.9 9.4 9.7 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 ID [:A] 1000 1000 500 500 200 200 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Max. clamping voltage at Max. Begrenzerspannung at / bei IPPM (10/1000:s). VC [V] 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 IPPM [A] 38.0 40.0 35.0 37.0 33.0 34.0 30.0 31.0 28.0 29.0 26.0 27.0 24.0 25.0 22.0 23.0 19.0 21.0 17.8 18.6 16.0 16.5 14.0 15.0 13.0 13.7 12.0 12.6 10.7 11.0 9.6 10.0 8.8 9.0 8.0 8.4 7.4 7.7 6.7 7.0 6.2 6.4 For bidirectional types (suffix "C") electrical characteristics apply in both directions 266 01.04.2000 TGL 41-6.8 ... TGL 41-200A TGL 41-6.8C ... TGL 41-200CA Maximum ratings Type Typ Grenzwerte Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA VBR [V] TGL 41-51 TGL 41-51A TGL 41-56 TGL 41-56A TGL 41-62 TGL 41-62A TGL 41-68 TGL 41-68A TGL 41-75 TGL 41-75A TGL 41-82 TGL 41-82A TGL 41-91 TGL 41-91A TGL 41-100 TGL 41-100A TGL 41-110 TGL 41-110A TGL 41-120 TGL 41-120A TGL 41-130 TGL 41-130A TGL 41-150 TGL 41-150A TGL 41-160 TGL 41-160A TGL 41-170 TGL 41-170A TGL 41-180 TGL 41-180A TGL 41-200 TGL 41-200A 51 10% 51 5% 56 10% 56 5% 62 10% 62 5% 68 10% 68 5% 75 10% 75 5% 82 10% 82 5% 91 10% 91 5% 100 10% 100 5% 110 10% 110 5% 120 10% 120 5% 130 10% 130 5% 150 10% 150 5% 160 10% 160 5% 170 10% 170 5% 180 10% 180 5% 200 10% 200 5% 45.9...56.1 48.5...53.6 50.4...61.6 53.2...58.8 55.8...68.8 58.9...65.1 61.2...74.8 64.6...71.4 67.5...82.5 71.3...78.8 73.8...90.2 77.9...86.1 81.9...100 86.5...95.5 90.0...110 95.0...105 99.0...121 105...116 108...132 114...126 117...143 124...137 135...165 143...158 144...176 152...168 153...187 162...179 162...198 171...189 180...220 190...210 Max. stand-off voltage Max. Sperrspannung at / bei ID VWM [V] 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 ID [:A] 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Max. clamping voltage at Max. Begrenzerspannung at / bei IPPM (10/1000:s). VC [V] 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 IPPM [A] 5.7 6.0 5.2 5.4 4.7 5.0 4.2 4.5 3.8 4.0 3.5 3.7 3.2 3.3 2.9 3.0 2.6 2.7 2.4 2.5 2.2 2.3 1.9 2.0 1.8 1.9 1.7 1.8 1.6 1.7 1.4 1.5 Fur bidirektionale Dioden (Suffix "C") gelten die elektrischen Werte in beiden Richtungen 01.04.2000 267 TGL 41-6.8 ... TGL 41-200A TGL 41-6.8C ... TGL 41-200CA 1 The order of type numbers is graded to the international E 24 standard. The standard tolerance of the breakdown voltage for each type is 10%. Suffix "A" denotes a tolerance of 5% for the breakdown voltage. e.g.: TGL 41-160CA = bidirectional diode, VBR = 160V ( 5%), VWM = 136 V TGL 41-27A = unidirectional diode, VBR = 27V ( 5%), VWM = 23.1 V Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die Toleranz der Arbeitsspannung jedes einzelnen Typs betragt in der Standardausfuhrung 10%. Suffix "A" kennzeichnet eine Toleranz der Arbeitsspannung von 5%. z.B.: TGL 41-160CA = bidirektionale Diode, VBR = 160V ( 5%), VWM = 136 V TGL 41-27A = unidirektionale Diode, VBR = 27V ( 5%), VWM = 23.1 V 1 ) Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad) an jedem Anschlu 268 01.04.2000