1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
Benets
• Approvals: ENEC, UL, cUL
• X2 CLASS (IEC 60384-14)
• Rated voltage: 440VAC 50/60Hz
• Capacitance range: 0.0047 – 2.2 µF
• Lead spacing: 10.0 – 37.5 mm
• Capacitance tolerance: ±20%, ±10%
• Climatic category 40/110/56, IEC 60068–1
• Tape & Reel in accordance with IEC 60286–2
• RoHS compliant and lead-free terminations
• Operatingtemperaturerangeof−40°Cto+110°C
• 100% screening factory test at 2,200 VDC/1,500 VAC
• Self healing properties
• Automotive (AEC-Q200) grades available up to
22.5 mm lead spacing
Overview
The R47 series is constructed of metallized polypropylene
lmencapsulatedwithself-extinguishingresininaboxof
material that meets the requirements of UL 94 V–0.
Automotive Grade devices (up to 22.5 mm lead spacing)
meet the demanding Automotive Electronics Council's
AEC-Q200qualicationrequirements.
Applications
For worldwide use in electromagnetic interference (EMI)
suppression in across-the-line applications that require X2
safetyclassication.Intendedforuseinsituationsinwhich
capacitorfailurewouldnotresultinexposuretoelectric
shock.
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C
(Automotive Grade)
Part Number System
R47 4 F 1470 00 01 M
Series Rated Voltage
(VAC) Lead Spacing (mm) Capacitance
Code (pF) Packaging Internal Use Capacitance
Tolerance
X2, Metallized
Polypropylene
4 = 440 F = 10.0
I = 15.0
N = 22.5
R = 27.5
W = 37.5
The last three
digits represent
signicantgures.
Therstdigit
speciesnumber
of zeros to be
added.
See Ordering
Options Table
01
02
03
K = ±10%
M = ±20%
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Ordering Options Table
Lead Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
Lead and
Packaging Code
10
15
22.5
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4+2/−0
00
Ammo Pack
H0= 18.5 ±0.5
DQ
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
= 18.5 ±0.5 CK
Bulk (Bag) – Short Leads 3.5+0.5/−0 JB
Bulk (Bag) – Short Leads 4.0+0.5/−0 JE
Bulk (Bag) – Long Leads 30+5/−0 40
Bulk (Bag) – Long Leads 25+2/−1 50
27.5
37.5
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
4+2/−0
00
Tape & Reel (Large Reel)
H0= 18.5 ±0.5
CK
Other Lead and Packaging Options
Bulk (Tray) – Short Leads
3.5+0.5/−0
JB
Bulk (Tray) – Long Leads
30+5/−0
40
Bulk (Tray) – Long Leads
25+2/−1
50
3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Dimensions – Millimeters
H
p
LL
d
L B
FRONT VIEW SIDE VIEW
p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
10.0
±0.4
4.0
+0.2
9.0
+0.1
13.0
+0.2
0.6
±0.05
10.0 ±0.4 5.0 +0.2 11.0 +0.1 13.0 +0.2 0.6 ±0.05
10.0
±0.4
6.0
+0.2
12.0
+0.1
13.0
+0.2
0.6
±0.05
15.0 ±0.4 5.0 +0.2 11.0 +0.1 18.0 +0.3 0.6 ±0.05
15.0
±0.4
6.0
+0.2
12.0
+0.1
18.0
+0.3
0.6
±0.05
15.0 ±0.4 6.0 +0.2 17.5 +0.1 18.0 +0.3 0.6 ±0.05
15.0
±0.4
7.5
+0.2
13.5
+0.1
18.0
+0.5
0.6
±0.05
15.0 ±0.4 7.5 +0.2 18.5 +0.1 18.0 +0.5 0.8 ±0.05
15.0
±0.4
8.5
+0.2
14.5
+0.1
18.0
+0.5
0.6
±0.05
15.0 ±0.4 9.0 +0.2 12.5 +0.1 18.0 +0.5 0.6 ±0.05
15.0
±0.4
10.0
+0.2
16.0
+0.1
18.0
+0.5
0.8
±0.05
15.0 ±0.4 11.0 +0.2 19.0 +0.1 18.0 +0.5 0.8 ±0.05
15.0
±0.4
13.0
+0.2
12.0
+0.1
18.0
+0.5
0.8
±0.05
22.5 ±0.4 6.0 +0.2 15.0 +0.1 26.5 +0.3 0.8 ±0.05
22.5
±0.4
6.5
+0.2
13,5
+0.1
26.5
+0.3
0.8
±0.05
22.5 ±0.4 7.0 +0.2 16.0 +0.1 26.5 +0.3 0.8 ±0.05
22.5
±0.4
8.5
+0.2
17.0
+0.1
26.5
+0.3
0.8
±0.05
22.5 ±0.4 10.0 +0.2 18.5 +0.1 26.5 +0.3 0.8 ±0.05
22.5
±0.4
11.0
+0.2
20.0
+0.1
26.5
+0.3
0.8
±0.05
22.5 ±0.4 13.0 +0.2 22.0 +0.1 26.5 +0.3 0.8 ±0.05
27.5
±0.4
9.0
+0.2
17.0
+0.1
32.0
+0.3
0.8
±0.05
27.5 ±0.4 11.0 +0.2 20.0 +0.1 32.0 +0.3 0.8 ±0.05
27.5
±0.4
13.0
+0.2
22.0
+0.1
32.0
+0.3
0.8
±0.05
27.5 ±0.4 14.0 +0.2 28.0 +0.1 32.0 +0.3 0.8 ±0.05
27.5
±0.4
18.0
+0.2
33.0
+0.1
32.0
+0.3
0.8
±0.05
27.5 ±0.4 22.0 +0.2 37.0 +0.1 32.0 +0.3 0.8 ±0.05
37.5
±0.4
11.0
+0.3
22.0
+0.1
41.5
+0.3
1.0
±0.05
37.5 ±0.4 13.0 +0.3 24.0 +0.1 41.5 +0.3 1.0 ±0.05
37.5
±0.4
16.0
+0.3
28.5
+0.1
41.5
+0.3
1.0
±0.05
37.5 ±0.4 19.0 +0.3 32.0 +0.1 41.5 +0.3 1.0 ±0.05
37.5
±0.4
20.0
+0.3
40.0
+0.1
41.5
+0.3
1.0
±0.05
Note: See Ordering Options Table for lead length (LL/H0) options.
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Performance Characteristics
−40 −20 0
0
10
20
30
40
50
60
70
80
90
100
20
Temperature (°C)
Maximum Humidity in Storage Conditions
Relative Humidity (%)
40 60 80
30 Days
Annual Average
Dielectric Polypropylenelm
Plates Metal layer deposited by evaporation under vacuum
Winding Non-inductive type
Leads Tinned wire
Protection Plasticcase,thermosettingresinlled.BoxmaterialissolventresistantandameretardantaccordingtoUL94.
Related Documents IEC 60384–14, EN 60384–14
Rated Voltage VR440 VAC (50/60 Hz), 1,000 VDC
Capacitance Range 4700 pF to 1 µF
Capacitance Values E6series(IEC60063)measured@1kHzand+20±1°C
Capacitance Tolerance ±10%, ±20%
Temperature Range −40ºCto+110°C
Climatic Category 40/110/56 IEC 60068-1
Storage Conditions
Storagetime:≤24monthsfromthedatemarkedonthelabelpackage
Averagerelativehumidityperyear≤70%
RH≤85%for30daysrandomlydistributedthroughouttheyear
Dew is absent
Temperature:−40to80°C(see"MaximumHumidityinStorageConditions"graphbelow)
Approvals ENEC, UL, cUL
5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Performance Characteristics cont'd
Qualication
AutomotiveGradeproductsmeetorexceedtherequirementsoutlinedbytheAutomotiveElectronicsCouncil.Details
regardingtestmethodsandconditionsarereferencedindocumentAEC–Q200,StressTestQualicationforPassive
Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit the
website at www.aecouncil.com.
Impedance Graph
DissipationFactor(tanδ) ≤0.1%(0.06%*)at1kHz,+25°C±5°C(*typicalvalue)
Test Voltage Between Terminals
the requirements in applicable equipment standards. All electrical characteristics are checked after the test.
This test cannot be repeated, as there is a risk of damaging the capacitor. KEMET is not liable in such cases
Insulation Resistance
Measuredat+25°C±5°C,accordingtoIEC60384–2
Minimum Values Between Terminals
Voltage Charge Voltage Charge Time C≤0.33μF C>0.33μF
100 VDC 1 minute ≥1•105MΩ ≥30,000MΩ•µF
In DC Applications Recommendedvoltage≤1,000VDC
6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Environmental Test Data
Test IEC Publication Procedure
Endurance EN/IEC 60384–14
1.25xV
R
VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2
Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles
Active Flammability IEC 60384–14 VR+20surgepulsesat2.5kV(pulseevery5seconds)
Passive Flammability IEC 60384–14 IEC60384–1,IEC60695–11–5Needleametest
Damp Heat Steady State IEC 60068–2–78 Test Cab +40°Cand93%RH,56days
Approvals
Mark Specication File Number
EN/IEC 60384-14 CA08.00101
UL 60384-14 and
CAN/CSA E60384-14
(440VAC)
E97797
Environmental Compliance
All KEMET EMI capacitors are RoHS compliant.
7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Table 1 – Ratings & Part Number Reference
Capacitance
Value (µF)
Dimensions in mm Lead Spacing
(p)
dV/dt
(V/µs)
New KEMET
Part Number
Legacy Part
Number
B H L
0.0047 4.0 9.0 13.0 10.0 750 474F1470(1)01(2) R474F1470(1)01(2)
0.0068 5.0 11.0 13.0 10.0 750 474F1680(1)01(2) R474F1680(1)01(2)
0.0082 6.0 12.0 13.0 10.0 750 474F1820(1)01(2) R474F1820(1)01(2)
0.010 6.0 12.0 13.0 10.0 750 474F2100(1)01(2) R474F2100(1)01(2)
0.010 5.0 11.0 18.0 15.0 600 474I2100(1)01(2) R474I2100(1)01(2)
0.012 5.0 11.0 18.0 15.0 600 474I2120(1)01(2) R474I2120(1)01(2)
0.015 5.0 11.0 18.0 15.0 600 474I2150(1)01(2) R474I2150(1)01(2)
0.018 5.0 11.0 18.0 15.0 600 474I2180(1)01(2) R474I2180(1)01(2)
0.022 6.0 12.0 18.0 15.0 600 474I2220(1)01(2) R474I2220(1)01(2)
0.027 6.0 12.0 18.0 15.0 600 474I2270(1)01(2) R474I2270(1)01(2)
0.033 6.0 12.0 18.0 15.0 600 474I2330(1)01(2) R474I2330(1)01(2)
0.039 7.5 13.5 18.0 15.0 600 474I2390(1)01(2) R474I2390(1)01(2)
0.047 7.5 13.5 18.0 15.0 600 474I2470(1)01(2) R474I2470(1)01(2)
0.047 6.0 17.5 18.0 15.0 600 474I2470(1)02(2) R474I2470(1)02(2)
0.047 9.0 12.5 18.0 15.0 600 474I2470(1)03(2) R474I2470(1)03(2)
0.056 8.5 14.5 18.0 15.0 600 474I2560(1)01(2) R474I2560(1)01(2)
0.068 10.0 16.0 18.0 15.0 600 474I2680(1)01(2) R474I2680(1)01(2)
0.068 7.5 18.5 18.0 15.0 600 474I2680(1)02(2) R474I2680(1)02(2)
0.068 13.0 12.0 18.0 15.0 600 474I2680(1)03(2) R474I2680(1)03(2)
0.082 10.0 16.0 18.0 15.0 600 474I2820(1)01(2) R474I2820(1)01(2)
0.10 11.0 19.0 18.0 15.0 600 474I3100(1)01(2) R474I3100(1)01(2)
0.047 6.0 15.0 26.5 22.5 300 474N2470(1)01(2) R474N2470(1)01(2)
0.047 6.5 13.5 26.5 22.5 300 474N2470(1)02(2) R474N2470(1)02(2)
0.068 6.0 15.0 26.5 22.5 300 474N2680(1)01(2) R474N2680(1)01(2)
0.10 7.0 16.0 26.5 22.5 300 474N3100(1)01(2) R474N3100(1)01(2)
0.12 8.5 17.0 26.5 22.5 300 474N3120(1)01(2) R474N3120(1)01(2)
0.15 10.0 18.5 26.5 22.5 300 474N3150(1)01(2) R474N3150(1)01(2)
0.18 10.0 18.5 26.5 22.5 300 474N3180(1)01(2) R474N3180(1)01(2)
0.22 11.0 20.0 26.5 22.5 300 474N3220(1)01(2) R474N3220(1)01(2)
0.27 13.0 22.0 26.5 22.5 300 474N3270(1)01(2) R474N3270(1)01(2)
0.33 13.0 22.0 26.5 22.5 300 474N3330(1)01(2) R474N3330(1)01(2)
0.15 9.0 17.0 32.0 27.5 225 474R3150(1)01(2) R474R3150(1)01(2)
0.18 9.0 17.0 32.0 27.5 225 474R3180(1)01(2) R474R3180(1)01(2)
0.22 9.0 17.0 32.0 27.5 225 474R3220(1)01(2) R474R3220(1)01(2)
0.27 9.0 17.0 32.0 27.5 225 474R3270(1)02(2) R474R3270(1)02(2)
0.33 11.0 20.0 32.0 27.5 225 474R3330(1)02(2) R474R3330(1)02(2)
0.39 11.0 20.0 32.0 27.5 225 474R3390(1)01(2) R474R3390(1)01(2)
0.47 13.0 22.0 32.0 27.5 225 474R3470(1)01(2) R474R3470(1)01(2)
0.56 13.0 22.0 32.0 27.5 225 474R3560(1)01(2) R474R3560(1)01(2)
0.68 14.0 28.0 32.0 27.5 225 474R3680(1)01(2) R474R3680(1)01(2)
0.82 18.0 33.0 32.0 27.5 225 474R3820(1)01(2) R474R3820(1)01(2)
1.0 18.0 33.0 32.0 27.5 225 474R4100(1)01(2) R474R4100(1)01(2)
1.2 18.0 33.0 32.0 27.5 225 474R4120(1)01(2) R474R4120(1)01(2)
1.5 22.0 37.0 32.0 27.5 225 474R4150(1)01(2) R474R4150(1)01(2)
0.47 11.0 22.0 41.5 37.5 150 474W3470(1)01(2) R474W3470(1)01(2)
0.56 11.0 22.0 41.5 37.5 150 474W3560(1)01(2) R474W3560(1)01(2)
0.68 13.0 24.0 41.5 37.5 150 474W3680(1)01(2) R474W3680(1)01(2)
0.82 16.0 28.5 41.5 37.5 150 474W3820(1)01(2) R474W3820(1)01(2)
1.0 16.0 28.5 41.5 37.5 150 474W4100(1)01(2) R474W4100(1)01(2)
1.2 19.0 32.0 41.5 37.5 150 474W4120(1)01(2) R474W4120(1)01(2)
1.5 19.0 32.0 41.5 37.5 150 474W4150(1)01(2) R474W4150(1)01(2)
1.8 20.0 40.0 41.5 37.5 150 474W4180(1)01(2) R474W4180(1)01(2)
2.2 20.0 40.0 41.5 37.5 150 474W4220(1)01(2) R474W4220(1)01(2)
Capacitance
Value (µF) B (mm) H (mm) L (mm) Lead Spacing (p) dV/dt (V/µs) New KEMET
Part Number
Legacy
Part Number
(1) Insert ordering code for lead type and packaging. See Ordering Options Table for available options.
(2) M = ±20%, K = ±10%
8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Manual Soldering Recommendations
Following is the recommendation for manual
soldering with a soldering iron.
The soldering iron tip temperature should
besetat350°C(+10°Cmaximum),withthe
solderingdurationnottoexceedmorethan
3 seconds.
Recommended Soldering Temperature
0
50
100
150
200
250
300
350
400
01234567
8
Soldering time (seconds)
Soldering iron bit temperature (°C)
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary
soldermaterial.Thishasincreasedtheliquidustemperaturefrom183°CforSnPbeutecticalloysto217–221°Cforthenew
alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-
heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene
is160–170°C).Wavesolderingcanbedestructive,especiallyformechanicallysmallpolypropylenecapacitors(withlead
spacingof5–15mm).Greatcaremustbetakenduringsoldering.TherecommendedsolderprolesfromKEMETshouldbe
used. Consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves
as a solid guideline for successful soldering. See Figure 1.
Reowsolderingisnotrecommendedforthrough-holelmcapacitors.Exposingcapacitorstoasolderingproleinexcess
of the above-recommended limits may result to degradation of or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components.
Insertthrough-holepartsaftercuringsurfacemountparts.ConsultKEMETtodiscusstheactualtemperatureprolein
theoven,ifthrough-holecomponentsmustpassthroughtheadhesivecuringprocess.Amaximumtwosolderingcycles
is recommended. Allow time for the capacitor surface temperature to return to normal temperature before performing the
second soldering cycle.
Wave Soldering Recommendations
0
50
100
150
200
250
300
0
40
80
120
160
200
240
Temperature (°C)
Time (s)
ca 2°C/second
ca 3.5°C/second typical
ca 5°C/second
Cooling
2 +3 seconds maximum
115 °C max
T
preheat
∆T < 150°C
100 °C
Preheating
Typical
First wave
Second wave
260°C
9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1.Thetableindicatesthemaximumset-uptemperatureofthesolderingprocess.
Dielectric
Film Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor
Pitch
≤10mm
Capacitor
Pitch
= 15 mm
Capacitor
Pitch
> 15 mm
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Polyester 130°C 130°C 130°C 270°C 270°C
Polypropylene 100°C 110°C 130°C 260°C 270°C
Paper 130°C 130°C 140°C 270°C 270°C
Polyphenylene
Sulphide 150°C 150°C 160°C 270°C 270°C
2.Themaximumtemperaturemeasuredinsidethecapacitor:setthetemperaturesothatthemaximumtemperatureinside
the element is below the limit.
Dielectric Film Material Maximum Temperature
Measured Inside the Element
Polyester 160°C
Polypropylene 110°C
Paper 160°C
Polyphenylene Sulphide 160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectivedipsolderingisavariationofreowsoldering.Inthismethod,theprintedcircuitboardwiththrough-hole
componentstobesolderedispreheatedandtransportedoverthesolderbathasitisinnormalowsoldering,without
touching the solder. When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath with
molten solder, only at the places of the selected components, and pressed against the lower surface of the board to solder
the components.
Thetemperatureproleforselectivesolderingissimilartothedoublewaveowsolderingoutlinedinthisdocument.
However, instead of two baths, there is only one with a time from 3 – 10 seconds. In selective soldering, the risk of
overheatingisgreaterthanindoublewaveowsoldering,andgreatcaremustbetakensothatthepartsdonotoverheat.
10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Construction
2 Sections Detailed Cross Section
Self-Extinguishing
Resin
Molded Plastic
Case
Molded Plastic
Case
Leads
Metal Contact
Layer
Metal Contact
Layer
Margin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Single-sided Metallized
Polypropylene Film
(First Layer)
Margin
Margin
Single-sided
Metallized
Polypropylene
Film
FILM WINDING SCHEME OPTIONS
1 Section
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided Metallized Polypropylene Film
2 Sections
3 Sections 4 Sections
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
1 Section
Double-sided Metallized Polyester Film
3 Sections
Double-sided
Metallized
Polyester
Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester
Carrier
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
1 Section
Polypropylene Film/Foil
2 Sections
Metal Foil Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metallized Polyphenyl-
ene Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
1 Section
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
1 Section
Metallized Impregnated Paper
Single-sided
Metallized
Polyester
Film
1 Section
Single-sided Metallized Polyester Film
Polypropylene
Film Dielec-
tric
1 Section
AXIAL - Polypropylene Film/Foil
2 Sections
Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metal Foil
Single-sided
Metallized
Polypropylene
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
1 Section
AXIAL - Single-sided Metallized
Polypropylene Film
Single-sided
Metallized
Polyester
Film
1 Section
AXIAL - Single-sided Metallized
Polyester Film
AXIAL - Double-sided
Metallized Polyester Film
Winding Scheme
11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Marking
IEC Climatic
Category
Approval
Marks
TOPFRONT
Lead Spacing 10 mm
Manufacturer’s
Logo
Manufacturing
Plant
IEC Climatic
Category
Approval
Marks
TOPFRONT
Series
Capacitance,
Capacitance
Tolerance,
Rated Voltage
Manufacturing
Plant
Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.5 mm
Manufacturer’s
Logo
Dielectric
Code Safety
Class Self
Healing
Passive
Flammability
Category Date Code
QA Number
Capacitance Tolerance
Date Code
Capacitance,
Rated Voltage
Series,
Dielectric
Code, Safety
Class, Self
Healing
IEC Climatic
Category
Approval
Marks
TOPFRONT
Lead Spacing 15 mm, 22.5 mm (small case sizes)
Manufacturer’s
Logo
Passive Flammability
Category
Manufacturing
Plant
Capacitance Tolerance
Date Code
Capacitance,
Rated Voltage
Series,
Dielectric
Code, Safety
Class, Self
Healing
Passive Flammability
Category:
B for volume ≥ 1750 mm3
C for volume < 1750 mm3
12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Marking cont'd
IEC Climatic
Category
Approval
Marks
TOPFRONT
Lead Spacing 10 mm
Manufacturer’s
Logo
Manufacturing
Plant
IEC Climatic
Category
Approval
Marks
TOPFRONT
Series
Capacitance,
Capacitance
Tolerance,
Rated Voltage
Manufacturing
Plant
Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.5 mm
Manufacturer’s
Logo
Dielectric
Code Safety
Class Self
Healing
Passive
Flammability
Category Date Code
QA Number
Capacitance Tolerance
Date Code
Capacitance,
Rated Voltage
Series,
Dielectric
Code, Safety
Class, Self
Healing
IEC Climatic
Category
Approval
Marks
TOPFRONT
Lead Spacing 15 mm, 22.5 mm (small case sizes)
Manufacturer’s
Logo
Passive Flammability
Category
Manufacturing
Plant
Capacitance Tolerance
Date Code
Capacitance,
Rated Voltage
Series,
Dielectric
Code, Safety
Class, Self
Healing
Passive Flammability
Category:
B for volume ≥ 1750 mm3
C for volume < 1750 mm3
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year Code Month Code
2000
M
January
1
2001
N
February
2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008
W
September
9
2009
X
October
O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017
J
2018
K
2019
L
2020
M
13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Packaging Quantities
Lead Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads
Standard
Reel
ø 355 mm
Large Reel
ø 500 mm
Ammo
Taped
10
4
9
13
2000
1800
750
1500
1000
5
11
13
1300
1500
600
1250
800
6
12
13
1000
1200
500
1000
680
15
5
11
18
2000
1000
600
1250
800
6
12
18
1750
900
500
1000
680
6
17.5
18
1000
700
500
1000
680
7.5
13.5
18
1000
700
350
800
500
7.5
18.5
18
900
500
–
800
500
8.5
14.5
18
1000
500
300
700
440
9
12.5
18
1000
520
270
650
410
10
16
18
750
500
300
600
380
11
19
18
450
350
–
500
340
13
12
18
750
490
200
480
280
22.5
6
15
26.5
805
500
–
700
464
6.5
13,5
26.5
800
–
–
–
–
7
16
26.5
700
500
–
550
380
8.5
17
26.5
468
300
–
450
280
10
18.5
26.5
396
300
–
350
235
11
20
26.5
360
250
–
350
217
13
22
26.5
300
200
–
300
–
27.5
9
17
32
816
408
–
450
–
11
20
32
560
336
–
350
–
13
22
32
480
288
–
300
–
14
28
32
352
176
–
–
–
18
33
32
256
128
–
–
–
22
37
32
168
112
–
–
–
37.5
11
22
41.5
420
252
–
–
–
13
24
41.5
360
216
–
–
–
16
28.5
41.5
216
108
–
–
–
19
32
41.5
192
96
–
–
–
20
40
41.5
126
84
–
–
–
14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Description Symbol
Dimensions (mm)
Lead Space
Tol.
10
15
22.5
27.5
Fig. 1
Fig. 2
Fig. 3
Fig. 3
Lead wire diameter d 0.6 0.6–0.8 0.8 0.8 ±0.05
Taping lead space P25.4 25.4 38.1 38.1 ±1
Feedholeleadspace* P
0
12.7 12.7 12.7 12.7 ±0.2**
Centering of the lead wire P
1
7.7 5.2 7.8 5.3 ±0.7
Centering of the body P
2
12.7 12.7 19.05 19.05 ±1.3
Leadspacing(pitch)*** F10 15 22.5 27.5 +0.6/−0.1
Component alignment ∆h 0000±2
Height of component
from tape center H0**** 18.5 18.5 18.5 18.5 ±0.5
Carrier tape width W18 18 18 18 +1/−0.5
Hold down tape width W
0
910 10 10 Minimum
Hole position W
1
9999±0.5
Hold down tape position W
2
3333Maximum
Feed hole diameter D
0
4444±0.2
Total tape thickness t0.7 0.7 0.7 0.7 ±0.2
* 15 mm also available
** Maximum of 1 mm on 20 lead spaces
*** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request
**** H0 = 16.5 mm is available upon request
P
P2
P0
F
H0
W
h
P1D0
W2
W1
W0
h
ød
P
P2
P1
Figure 1
Lead Spacing 10 mm
Figure 2
Lead Spacing 15 mm
Figure 3
Lead Spacing 22.5 – 27.5 mm
t
A-B
A B
15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Dimensions (mm)
H W T
360 340 59
Reel Speci cations
Reel Size Dimensions (mm)
D H W
Standard
355
30
55Maximum
Large
500
25
D
W
H
H
T
W
16© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3096_R47_X2_440 • 12/6/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X2, 440 VAC, 110°C (Automotive Grade)
KEMET Electronics Corporation Sales Offi ces
Foracompletelistofourglobalsalesoffices,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checkingandverifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.AllInformationgiven
hereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
TheInformationisintendedforuseonlybycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.