TUA 2019-5X VHF I / VHF II / UHF-Tuner IC Preliminary Data Bipolar IC Features Few external components Frequency and amplitude-stable unbalanced oscillator for the VHF I-frequency range Frequency and amplitude-stable balanced oscillators for the VHF II- and UHF-frequency range Optimum decoupling of input frequency from oscillator Double balanced mixer with wide dynamic range and high-impedance inputs for the VHF I-frequency range P-DSO-24-1 Double balanced mixer with wide dynamic range and low-impedance inputs for the VHF II- and UHF-frequency range Low-impedance SAW-filter driver output SAW-filter driver with high signal-handling capability Internal band switch Low-noise, internal reference voltage Integrated 1st IF-bandpass filter Type Ordering Code Package TUA 2019-5X Q67000-A5150 P-DSO-24-1 (SMD) TUA 2019-5X Q67006-A5150 P-DSO-24-1 Tape & Reel Circuit Description This integrated circuit permits the design of TV-tuners covering the entire frequency range from 48 ... 900 MHz split into 3 frequency bands. The application is suitable for all tuners in TV- and VCR-sets. The integrated circuit includes 3 balanced mixers (double balanced mixer/ring mixer), one unbalanced oscillator for VHF I and two balanced oscillators for VHF II and UHF, a SAW-filter driver amplifier as well as a reference voltage source and a band switch. Filters between tuner input and IC separate the TV-frequency signal into three bands. The band switch ensures that only one band at a time is activated. In the activated band the signal passes a frontend stage with MOSFET-amplifier, a double-tuned bandpass filter and is then fed to the balanced mixer input of the IC which is a high-impedance stage for the VHF I-range and a low-impedance stage for the VHF II- and UHF-range, respectively. The input signal is mixed there with the oscillator signal from the activated oscillator section and fed into common IF-stage for all bands. The IF-signal is further amplified in a SAW-filter driver section in order to drive the SAW-filter with a low impedance. Semiconductor Group 1 02.95 TUA 2019-5X Pin Configuration (top view) P-DSO-24-1 Semiconductor Group 2 TUA 2019-5X Pin Definitions and Functions Pin No. Symbol Function 1 Osc. output 1 VHF I/ VHF II/ UHF-osc. signal output to PLL, symmetrical to pin 2 2 Osc. output 2 VHF I/ VHF II/ UHF-osc. signal output to PLL, symmetrical to pin 1 3 GND Ground 4 VHF I-input 1 VHF I-mixer input high-impedance, symmetrical to pin 5 5 VHF I-input 2 VHF I-mixer input high-impedance, symmetrical to pin 4 6 VHF II-input 1 VHF II-mixer input low-impedance, symmetrical to pin 7 7 VHF II-input 2 VHF II-mixer input low-impedance, symmetrical to pin 6 8 UHF-input 1 UHF-mixer input low-impedance, symmetrical to pin 9 9 UHF-input 2 UHF-mixer input low-impedance, symmetrical to pin 8 10 + VS Supply voltage 11 SAW-filter driv. out 1 SAW-filter driver output, low impedance, symmetrical to pin 12 12 SAW-filter driv. out 2 SAW-filter driver output, low impedance, symmetrical to pin 11 13 Band switch VHF I/ VHF II/ UHF-band switch 14 UHF-osc. input B1 UHF-osc. amplifier, high-impedance base input, symmetrical to pin 17 15 UHF-osc. output C2 UHF-osc. amplifier, high-impedance coll. output, symmetrical to pin 16 16 UHF-osc. output C1 UHF-osc. amplifier, high-impedance coll. output, symmetrical to pin 15 17 UHF-osc. input B2 UHF-osc. amplifier, high-impedance base input, symmetrical to pin 14 18 VHF II-osc. input B1 VHF II-osc. amplifier, high-impedance base input, symmetrical to pin 21 Semiconductor Group 3 TUA 2019-5X Pin Definitions and Functions (cont'd) Pin No. Symbol Function 19 VHF II-osc. output C2 VHF II-osc. amplifier, high-impedance collector output, symmetrical to pin 20 20 VHF II-osc. output C1 VHF II-osc. amplifier, high-impedance collector output, symmetrical to pin 19 21 VHF II-osc. input B2 VHF II-osc. amplifier, high-impedance base input, symmetrical to pin 18 22 VHF I-osc. coupling 1 VHF I-osc. coupling, collector output 23 GND Ground 24 VHF I-osc. coupling 2 VHF I-osc. coupling, base input Semiconductor Group 4 TUA 2019-5X Block Diagram Semiconductor Group 5 TUA 2019-5X Absolute Maximum Ratings TA = 0 to 70 C Parameter Symbol Supply voltage VS V10/3, 23 Current I10 Switching voltage V13 Limit Values Unit min. max. - 0.3 14 V 60 mA + VS V - 0.3 According to application circuit 1, only the provided circuitry can be connected to pins 1, 2, 4, 5, 6, 7, 8, 9, 11, 12, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 Junction temperature Tj Storage temperature Tstg Thermal resistance Rth SA - 40 150 C 125 C 75 K/W Operating Range Supply voltage VS 10 13.2 V Supply current I10 23 53 mA VHF I-mixer input frequency range fVHF I 30 500 MHz VHF II-mixer input frequency range fVHF II 30 900 MHz UHF-mixer input frequency range fUHF 30 900 MHz VHF I-oscillator frequency range fOVHF I 30 500 MHz VHF II-oscillator frequency range fOVHF II 30 900 MHz UHF-oscillator frequency range fOUHF 30 900 MHz Ambient temperature TA 0 70 C Semiconductor Group 6 TUA 2019-5X Characteristics TA = 25 C; VS = 12 V Parameter Current consumption Current consumption Symbol I10 I10 Limit Values Unit Test Condition Test Circuit V13 > 1.6 V V13 < 0.9 V 1 1 min. typ. max. 30 27 45 41 mA mA 1 V 10 A V13 = 0.5 V 1 216 MHz Vd = 0 ... 28 V 1 200 400 200 kHz kHz kHz VS = 12 V 10 % T = 25 C t = 5 s up to 15 min. after switching on 1 1 1 38 34 VHF I-Circuit Section Switching voltage V13 Switching current I13 Oscillator frequency range fVHF I Oscillator drift Oscillator drift Oscillator drift fVHF I fVHF I fVHF I Oscillator level Oscillator level VK VK 700 700 mVrms channel E2, at hot end mVrms channel S10, at hot end 1 1 Oscillator level Oscillator level aPLL aPLL - 20 - 20 dBm dBm channel E2 channel S10 1 1 Oscillator output impedance R1, 2 C1, 2 100 2 pF parallel equivalent circuit parallel equivalent circuit 3 3 Harmonic wave ratio interference level a1, 2 dB VHF = 1 Vrms 1 Oscillator pulling Oscillator pulling Oscillator pulling Oscillator pulling V4, 5 V4, 5 V4, 5 V4, 5 108 108 88 88 dB/V dB/V dB/V dB/V f = 10 kHz in channel E2 f = 10 kHz in channel S10 fint = E2 + (N + 5 - 1 MHz) fint = S10 + (N + 5 - 1 MHz) 1 1 1 1 Gain GVHF I 27 dB 1 Gain GVHF I 27 dB channel E2 pin 4, 5 > 11, 12 channel S10 pin 4, 5 > 11, 12 Mixer noise figure Mixer noise figure NFVHF I NFVHF I 7.5 7.5 channel E2 (DSB) channel S10 (DSB) 2 2 Semiconductor Group 0 80 - 10 100 100 80 80 9 9 dB dB 7 1 1 TUA 2019-5X Characteristics (cont'd) TA = 25 C; VS = 12 V Parameter Symbol Limit Values min. typ. Unit Test Condition Test Circuit 1 1 max. Interference voltage Interference voltage Vint Vint 70 70 dB/V dB/V 1 % cross mod.; E2 2 1 % cross mod.; S10 2 Mixer input impedance R4, 5 C4, 5 3 0.5 k pF parallel equivalent circuit 3 parallel equivalent circuit 3 IF-suppression IF-suppression aIF aIF 20 20 dB dB channel E2 channel S10 1 1 VHF II-Circuit Section Switching voltage V13 Switching current I13 Oscillator frequency range fVHF II Oscillator drift Oscillator drift Oscillator drift fVHF II fVHF II fVHF II Oscillator level Oscillator level aPLL aPLL Oscillator output impedance R1, 2 C1, 2 Harmonic wave ratio interference level a1, 2 Oscillator pulling Oscillator pulling Oscillator pulling Oscillator pulling V6, 7 V6, 7 V6, 7 V6, 7 Gain Gain Semiconductor Group 1.6 2.3 V 30 A V13 = 2.1 V 1 485 MHz Vd = 0 ... 28 V 1 400 500 200 kHz kHz kHz VS = 12 V 10 % T = 25 C t = 5 s up to 15 min. after switching on 1 1 1 - 20 - 20 dBm dBm E5 balanced tested S37 balanced tested 1 1 100 2 pF parallel equivalent circuit 3 parallel equivalent circuit 3 dB VHF = 1 Vrms 1 108 108 88 88 dB/V dB/V dB/V dB/V f = 10 kHz in channel E5 f = 10 kHz in channel S37 fint = K5 + (N + 5 - 1 MHz) fint = S37 + (N + 5 - 1 MHz) 1 1 1 1 GVHF II 41 dB 1 GVHF II 41 dB channel E5 pin 6, 7 > 11, 12 channel S37 pin 6, 7 > 11, 12 10 190 - 10 100 100 80 80 8 1 1 TUA 2019-5X Characteristics (cont'd) TA = 25 C; VS = 12 V Parameter Symbol Limit Values Unit Test Condition Test Circuit dB dB channel E5 (DSB) channel S37 (DSB) 2 2 100 100 dB/V dB/V 1 % cross mod.; E5 2 1 % cross mod.; S37 2 1 1 min. typ. max. Mixer noise figure Mixer noise figure NFVHF II NFVHF II Interference voltage Interference voltage Vint Vint Mixer input impedance R6, 7 L6, 7 25 10 nH serial equivalent circuit serial equivalent circuit 3 3 IF-suppression IF-suppression aIF aIF 20 20 dB dB channel E5 channel S37 1 1 7.5 7.5 97 97 9 9 UHF-Circuit Section Switching voltage V13 Switching current I13 Oscillator frequency range fUHF Oscillator drift Oscillator drift Oscillator drift fUHF fUHF fUHF 3.2 60 470 VS V 300 A V13 = VS 1 900 MHz Vd = 0 ... 28 V 1 400 800 600 kHz kHz kHz VS = 12 V 10 % T = 25 C t = 5 s up to 15 min. 1 1 1 1 after switching on Oscillator level Oscillator level V1, 2 V1, 2 - 20 - 20 dBm dBm E21 balanced tested E68 balanced tested Oscillator output impedance R1, 2 C1, 2 100 2 pF parallel equivalent circuit 3 parallel equivalent circuit 3 Harmonic wave ratio interference level a1, 2 dB VHF = 1 Vrms 1 Oscillator pulling Oscillator pulling Oscillator pulling Oscillator pulling V8, 9 V8, 9 V8, 9 V8, 9 dB/V dB/V dB/V dB/V f = 10 kHz in channel E21 f = 10 kHz in channel E68 fint = E21 + (N + 5 - 1 MHz) fint = E68 + (N + 5 - 1 MHz) 1 1 1 1 Semiconductor Group - 10 100 100 80 80 108 108 88 88 9 1 1 TUA 2019-5X Characteristics (cont'd) TA = 25 C; VS = 12 V Parameter Symbol Limit Values Unit Test Condition Test Circuit channel E21 pin 8, 9 > 11, 12 channel E68 pin 8, 9 > 11, 12 2 dB dB channel E21 (DSB) channel E68 (DSB) 2 2 100 100 dB/V dB/V 1 % cross mod.; E21 2 1 % cross mod.; E68 2 1 1 min. typ. max. Gain GUHF 41 dB Gain GUHF 41 dB Mixer noise figure Mixer noise figure NFUHF NFUHF 8 9 Interference voltage Interference voltage Vint Vint Mixer input impedance R8, 9 L8, 9 25 10 nH serial equivalent circuit serial equivalent circuit 3 3 IF-suppression aIF 20 dB channel E21 1 4 4 97 97 10 11 2 SAW-Filter Driver Section SAW-filter driver output impedance R11, 12 C11, 12 75 95 nH serial equivalent circuit serial equivalent circuit Output voltage linearity VAOFW 24 dBm total harmonic distortion factor THD = 5 % Semiconductor Group 10 TUA 2019-5X Test Circuit 1 Semiconductor Group 11 TUA 2019-5X Test Circuit 2 Semiconductor Group 12 TUA 2019-5X Measurement of the 4-pole matrix S11, S12, S21, S22 and calculation of the -equivalent circuit, which follows from that. Test Circuit 3 Test Point Test Frequency in MHz Pin x Pin y Oscillator output impedance 100 1 2 Mixer input impedance VHF 1 100 4 5 Mixer input impedance VHF 2 300 6 7 Mixer input impedance UHF 600 8 9 Semiconductor Group 13 TUA 2019-5X Measurement of the 4-pole matrix at 37 MHz S11, S12, S21, S22 and calculation of the -equivalent circuit, which follows from that. Test Circuit 4 Semiconductor Group 14 TUA 2019-5X Plastic Package, P-DSO-24-1 (SMD) (Plastic Dual Small Outline) GPS05144 Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book "Package Information" SMD = Surface Mounted Device Semiconductor Group 15 Dimensions in mm