71329 - OSRAM SYLVANIA - Datasheet.Live

—High lumen output for use in various

conventional lighting applications

—Flexible circuit board with self

adhesive backing allows for easy

installation into straight runs or

curved surfaces with a radius

as tight as 0.78in.

—Modules can be ﬁeld cut every one

to two LEDs to achieve a customized

ﬁt with the smallest independent

section comprised of 5.91in.

(6 LEDs)

—120° Beam angle

—Dimmable by pulse width modula-

tion, a method that maintains

consistent color and controls

lumen output

—Long life: up to 50,000 hours (L70)

minimizing maintenance frequency

—Entire reel can be powered from

a single feed

—Mercury free

—No UV or IR emissions

The newest version of LINEARlight FLEX POWER FLEX LED linear module

provides up to 80% more lumens compared to the second generation

product, 71-82 LPW and long 50,000 hours life (L70). This product is the

brightest, most efﬁcient product in our ﬂexible product line providing

489-566 lumens/ft. and 71-82 LPW. It is available in 2700K, 3000K and

4000K color temperatures with a CRI >80. The ﬂexibility to cut the mod-

ule every one to two LEDs at designated cut points provides versatility in

luminaire design. The best applications for these products include back-

lighting, border lighting, cove lighting, display

shelf lighting, under cabinet lighting and recessed accent lighting. The

LINEARlight FLEX POWER FLEX is optimally paired with OPTOTRONIC®

24Vdc power supplies and controls, and such systems are covered by

a 5-year system warranty.

Applications

—Border lighting

—Cove lighting

—Display shelves

—Edge lighting

—Path and contour marking

—Recessed lighting

—Signage

Application Information

LINEARlight FLEX® POWER FLEX

Flexible High Output LED Module

www.osram-americas.com/LED

Product Offering

Ordering Abbreviation Wattage Color Temperature

L68LFE/24V/827/PF 68 2700K

L68LFE/24V/830/PF 68 3000K

L68LFE/24V/840/PF 68 4000K

The LINEARlight FLEX POWER FLEX is UL8750 recognized for

the US and Canada Class 2 Unit (UL File # E320662)

The LINEARlight FLEX POWER FLEX is UL2108 listed for

the US and Canada Class 2 Unit (UL File # E247649)

Speciﬁcations and Certiﬁcations

Key Features & Beneﬁts

LED259R7 9-15

ULUS

LISTED

Ordering Guide

L 68 LFE / 24V / 8 27 / PF

Technology Power Type Voltage CRI Color Temperature POWER FLEX

L=LED 68 = 68 Watts LFE=Linear Flexible Engine >80 27 = 2700K

Minimum and Maximum Ratings

Parameter Values

Operating Temperature at Tc point -20 to +75°C (-4 to +167°F)

Storage Temperature Range -20 to +75°C (-4 to +167°F)

Voltage Range 23 – 25Vd c

Reverse Voltage 25Vdc

Notes:

1. Exceeding maximum ratings for operating and storage temperature will reduce expected lifetime or destroy the LED module.

2. Exceeding maximum ratings for operating voltage will cause hazardous overload and will likely destroy the LED module.

3. The temperature of the LED module must be measured at the Tc point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label.

For example location of Tc point, see drawing on next page.

Ordering Information

Module Input Current

Item Ordering European Length No. of Power Voltage Draw Color Lumens Lumens Watts

Number Abbreviation Part Number (feet) LEDs (W) (Vdc) (Amps) Temperature (lm) per foot per foot LPW

71329 L68LFE/24V/827/PF LF06P2-W5F-827 9.8 120 68 24 2.8 2700K 4792 489 6.9 70.5

71328 L68LFE/24V/830/PF LF06P2-W5F-830 9.8 120 68 24 2.8 3000K 5168 525 6.9 76.0

71327 L68LFE/24V/840/PF LF06P2-W5F-840 9.8 120 68 24 2.8 4000K 5544 566 6.9 81.5

Notes:

All data is related to the entire module. Data reﬂects statistical mean values. Actual data may differ depending on variances in the manufacturing process.

Beam angle = 120°

Power Supply Information

Max. Number of Modules and Max. Length per Power Supply

OT17 OT50 OT75 OT96 OT240*

(51622) (51598) (51514) (51520, 51522, 51626) (51627)

All Item Numbers 4c = 1.9' 12c = 5.9' 18c = 8.8' 23c (1.5r) = 11.3' 19c = 9.3'

Notes:

1. In the above chart, "c" = coupon, "r" = reel

2. A coupon (Smallest Electrical Unit - SEU) is a sub-section of the module containing 6 LEDs and at a length of 5.9". Reference this bulletin's "Assembly Diagram" for details.

3. These numbers are calculated based on maximum power values 82.5W.

4. The module is designed to work with Constant Voltage power supplies only. Reference the Power Supply PIB # ECS050 for product speciﬁc information.

5. To accurately determine the maximum LED load for the application refer to “Remote Mounting Distances” Application Note (LED126). This document can be found at www.sylvania.com/led.

6. The OT240 has 3 channels at 80W each. Values represented in chart are "per channel".

7. Parallel runs may be required to achieve the numbers listed above. Please reference this bulletin's "Wiring Diagram" for product speciﬁc wiring instructions.

Catalog # Type

Project

Comments

Prepared by

Speciﬁcation Data

Wiring Diagram

Assembly Diagram

Accessories

Item Ordering European Length Case Order

Number Abbreviation Part Number Description (inches) Qty. Qty.

Track Accessories

72356 LAC-T/STS/7FT LF-LTS-2100 6.9' aluminium track 83 40 1

72357 LAC-M/STS/CLIP LF-LTS-MB Optional mounting bracket for track 1.1 280 35

72360 LAC-T/STS-COV/C/7FT LF-LTS-COVER-CLEAR 6.9' clear cover for track 83 40 1

72358 LAC-T/STS-COV/D/7FT LF-LTS-COVER-DIFFUSE 6.9' diffused cover for track 83 40 1

72359 LAC-S/STS/ENDCAP LF-LTS-ENDCAP End cap used only with 72358 0.8 160 20

72361 LAC-T/STS-COV/SP/7FT LF-LTS-COVER-SHORTPITCH 6.9' diffused cover specifically 83 40 1

designed for short pitch product

Connection Accessories

71428 LAC-C/TP/TERMCAP LF-2TERM FLEX Termination Cap - 200 10

72671 LF-CONN Flex SC LF-CONN Flex SC Board to board connector piece 0.35 250 25

72947* LF-WIRE-30 FLEX SC LF-WIRE-30 FLEX SC 30mm connector wire 1.1 10,000 100

72948* LF-WIRE-150 FLEX SC LF-WIRE-150 FLEX SC 150mm connector wire 5.9 5000 50

72946 LF-2PIN Flex SC LF-2PIN Flex SC Input connector 20 250 10

*Use with 72671

The maximum operable length on a single feed is 1 full reel (9.8ft.).

Remaining load must be connected on subsequent power feeds.

Reference the “Power Supply Information” section of this PIB for

module load per power supply requirements.To help reduce the effects

of any potential voltage drop, if possible, it is best to locate the power

supply near the middle of the run.

118.1 3000

.31 8

3.92 99.6

4.91 124.6

5.91 150

.49 12.5 .99 25.1

"X1" Cut Point

If Cut Here, Attach Termination Cap

"X2" Cut Point

If Cut Here, Attach Termination Cap

SEU Cut Point

If Cut Here,

DO NOT

attach Termination Cap

Dimensions: Inches [mm]

Size of Entire Module (L x W x H)

118.1" x 0.31" x 0.1"

0.1 2.5

1. The LED module itself and all its components shall not be subjected to mechanical stress and assembly must not damage or destroy conducting paths on

the circuit board.

2. Observe correct electrical polarity, incorrect polarity may destroy the module. (Depending on the product, incorrect polarity may lead to emission of red or

no light.)

3. Ensure the power supply is of adequate power to operate the total load.

4. Electrostatic Discharge (ESD) precautions shall be incorporated when handling or installing the module. (For more information, reference document

# LED093 ESD Protection for LED Systems.)

5. Installation of LED modules shall be made with regard to all applicable electrical and safety standards. Only qualiﬁed personnel should be allowed to

perform installations.

6. Modules may be hot to the touch. Use caution when handling.

7. Damage by corrosion and improper heat sinking will not be honored as a materials defect claim. It is the user’s responsibility to ensure adequate heat sink

and protection against corrosive agents such as moisture, condensation and other harmful elements.

8. Avoid looking directly into the light beam as the high brightness may damage eyes.

9. The module, as manufactured, has no conformal coating and therefore offers no inherent protection against corrosion. The ability to customize the length

of the module by cutting at speciﬁcally marked points is a key feature of the product and hence the reason for no factory installed conformal coating.

For these reasons, it is recommended that the user complete all module modiﬁcation ﬁrst (cutting, wiring) and then apply a conformal coating in the ﬁnal

stages of installation.

WARNING: ONLY QUALIFIED PERSONNEL SHOULD PERFORM INSTALLATION. TO AVOID ELECTRICAL SHOCK OR COMPONENT DAMAGE, DISCONNECT

POWER BEFORE ATTEMPTING INSTALLATION OF THE POWER SUPPLIES AND/OR MODULES.

Failure to install the power supplies and/or LED modules in accordance with the National Electric Code (NEC), all applicable Federal, State and local electric codes as well

as the speciﬁc Underwriters Laboratories (UL) safety standards for the installation, location and application may cause serious personal injury, death, property

damage and/or product malfunction.

Safety Information

Assembly Information

1. The LINEARlight FLEX® POWER FLEX must be mounted on an appropriate metal heat sink.

2. The Smallest Electrical Unit can be removed by cutting with scissors before or after the designated solder pad.

3. The module may also be cut at points X1 or X2 (reference “Assembly Diagram” for locations). The following must be observed when making cuts at

these locations:

a. Observe the correct orientation of the module: The power feed must come from the side indicated in the technical drawing.

b. The module must not be cut before the ﬁrst two LEDs, which have the Tc Point in between them. This part would emit no light.

c. To operate the desired subunits, the termination LF-2TERM must be applied. Disengage the terminations locking mechanism, slide it over

the open contacts and press the locking mechanism back in place.

4. The mounting of the module is facilitated by means of the double-sided adhesive on the back-surface of the module. Care must be taken to provide a clean

and dry mounting surface, free of oils or silicone coatings as well as dirt particles. The mounting substrate must have sufﬁcient structural integrity. Take care

to completely remove the adhesive backing. Once the module is appropriately positioned, press on the module with about 20N/cm2 (refer to application

techniques of 3M adhesive transfer tapes).

5. Solder connections should only be performed on designated solder pads (marked “24V +/-”). During soldering, do not exceed the maximum

soldering time of 10 seconds and the maximum soldering temperature of 260°C.

6. Connecting soldered wires to an un-mounted module: Solder pads must not be pre-tinned. However, the wires must be pre-tinned at a max. 4 sec. at 300°C.

Allow solder points to completely cool down before performing the next soldering. Prevent shear, or peel forces.

7. Connecting soldered wires to a module mounted on a heat sink: Pre-tin solder pads and wires and solder for max. 3 sec. at 350°C. Allow

solder points to completely cool down before performing the next soldering. Prevent shear, or peel forces.

8. For applications involving exposure to humidity and dust, the module must be protected by a ﬁxture, or housing with a suitable protection class.

9. The module can be protected against condensation by treatment with an appropriate circuit board grade conformal coating. The conformal coating should have

the following features:

a. Optical transparency

b. UV – resistance

c. Thermal expansion matching the thermal expansion of the module 15-30 x 10^-6cm/cm/K

d. Low permeability of steam for all climate conditions

e. Resistance against corrosive environment

Note: Since this module’s connectors are “Dry Location Only” rated, they must not be used as a connection means when conformal coating becomes necessary.

Soldered wires are the appropriate connection means used in conjunction with conformal coating. Any of the necessary steps 2, 3, 5, 6, & 7 must be completed

before conformal coating can be applied.

OSRAM, OPTOTRONIC, LED CREATING TOMORROW and LINEARlight FLEX are registered trademarks of OSRAM GmbH.

Speciﬁcations subject to change without notice.

10. The minimum bending radius is 0.78 in. The module may be bent over a smaller radius but only in regions of the circuit board containing

no electronic components. Such bends should be made only once and ﬁxed in position to avoid cyclic fatigue.

11. The thermal expansion coefﬁcient along the length of the module is 17 x 10^-6cm/cm/K. When installing in environments with large variations in

temperature (e.g. outdoor applications) and operating length of more than 2m, the use of metallic mounting surfaces is necessary. Otherwise it is

advisable to use an additional thicker adhesive tape to absorb the stress of any mismatch in expansion coefﬁcients.

12. Parallel connection is highly recommended as safe electrical mode. Serial connection is not recommended. Unbalanced voltage drop can cause hazardous

overload and damage the LED module.

13. The maximum length of a coherently operable unit is one full reel. By two-pole feed in the middle or from both ends the length can be doubled.

14. When mounting on metallic or otherwise conductive surfaces, there needs to be electrical isolation at soldering points between module and

mounting surface.

Assembly Information (Continued)

OSRAM LED products are covered by our LED Module, OPTOTRONIC® Power Supply or Control Warranty.

The LINEARlight FLEX® POWER FLEX is covered under warranty as long as the temperature at the Tc point does not exceed 75°C; exceeding this temperature will void all warranties.

For additional information or to download the warranty registration form, refer to the latest version of the warranty available in the Literature section of www.osram-americas.com/LED.

Module Warranty: 3 years

System Warranty: 5 years

Warranty

Americas Headquarters

100 Endicott Street

Danvers, MA 01923 USA

Phone 1-800-LIGHTBULB