Product family data sheet
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and
EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company

Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300

CLD-DS199 REV 0A
Cree® XLamp® XHP35.2 LEDs
PRODUCT DESCRIPTION
The XLamp® XHP35.2 LED is the next
generation of Extreme High Power LEDs
available in the XP footprint. Built on
Cree’s latest high-power LED technology,
the XHP35.2 LED improves the voltage
characteristics, efcacy and reliability of
the XHP35 LED in the same 3.45 mm x
3.45mm footprint. The new XHP35.2 LED
provides an easy drop‑in upgrade so that
lighting manufacturers can achieve higher
system LPW on existing XHP35 designs
with minimal system redesign cost.
FEATURES
• Available in 5-step EasyWhite® bins
at 2700K to 5700K CCT and 3‑step
EasyWhite bins at 2700K to 3500K
CCT
• Available in ANSI white bins at
2700K to 7000K CCT
• Available in standard, 70‑, 80‑, 85‑
and 90‑minimum CRI options
• Binned at 85°C
• Maximum drive current: 1050mA
• Low thermal resistance: 1.8°C/W
• Wide viewing angle: 135°
• Unlimited oor life at
≤ 30ºC/85% RH
• Reow solderable ‑ JEDEC
J‑STD‑020C
• RoHS compliant
• UL® recognized component
(E349212)
TABLE OF CONTENTS
Characteristics ..............................................2
Flux Characteristics, EasyWhite® Order
Codes and Bins .............................................3
Flux Characteristics, ANSI White Order
Codes and Bins .............................................5
Relative Spectral Power Distribution ...........8
Relative Flux vs. Junction Temperature .......8
Electrical Characteristics ..............................9
Relative Flux vs. Current ...............................9
Relative Chromaticity vs. Current .............. 10
Relative Chromaticity vs. Temperature ..... 10
Typical Spatial Distribution ........................ 11
Thermal Design .......................................... 11
Performance Groups – Luminous Flux..... 12
Performance Groups – Chromaticity ........ 12
Cree’s EasyWhite® Chromaticity Regions
Plotted on the 1931 CIE Curve .................. 16
Cree’s Standard Cool White Kits Plotted
on ANSI Standard Chromaticity Regions .. 19
Cree’s Standard Warm and Neutral White
Kits Plotted on ANSI Standard
Chromaticity Regions ................................ 20
Bin and Order Code Formats ..................... 21
Reow Soldering Characteristics .............. 22
Notes .......................................................... 23
Mechanical Dimensions ............................ 24
Tape and Reel ............................................. 25
Packaging ................................................... 26
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
2
XLamp® XHp35.2 LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 1.8
Viewing angle (FWHM) degrees 135
Temperature coefcient of voltage mV/°C -5.6
ESD withstand voltage (HBM per Mil‑Std‑883D) V8000
DC forward current mA 1050
Reverse voltage V -5
Forward voltage (@ 350mA, 85°C) V 11.2 11.9
LED junction temperature °C 150
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
3
XLamp® XHp35.2 LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 23).
• Cree XLamp XHP35.2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS (TJ
The following table provides order codes for XLamp XHP35.2 LEDs. For a complete description of how the ux and chromaticity groups
are reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 21).
Nominal
CCT
CRI
Minimum
Luminous Flux

3-Step 5-Step
Min Typ Group 
 Group Order Code Group Order Code
5700K
70
E2 590
57E
XHP35B-00-0000-0D0BE257E
D4 550 XHP35B-00-0000-0D0BD457E
80
D4 550
57E
XHP35B-00-0000-0D0HD457E
D2 510 XHP35B-00-0000-0D0HD257E
90
C4 475
57E
XHP35B-00-0000-0D0UC457E
C2 440 XHP35B-00-0000-0D0UC257E
B4 410 XHP35B-00-0000-0D0UB457E
5000K
70
E2 590
57E
XHP35B-00-0000-0D0BE250E
D4 550 XHP35B-00-0000-0D0BD450E
80
D4 550
50E
XHP35B-00-0000-0D0HD450E
D2 510 XHP35B-00-0000-0D0HD250E
90
C4 475
50E
XHP35B-00-0000-0D0UC450E
C2 440 XHP35B-00-0000-0D0UC250E
B4 410 XHP35B-00-0000-0D0UB450E
4500K
70
E2 590
45E
XHP35B-00-0000-0D0BE245E
D4 550 XHP35B-00-0000-0D0BD445E
80
D4 550
45E
XHP35B-00-0000-0D0HD445E
D2 510 XHP35B-00-0000-0D0HD245E
90
C4 475
45E
XHP35B-00-0000-0D0UC445E
C2 440 XHP35B-00-0000-0D0UC245E
B4 410 XHP35B-00-0000-0D0UB445E
4000K
70
E2 590
40E
XHP35B-00-0000-0D0BE240E
D4 550 XHP35B-00-0000-0D0BD440E
D2 510 XHP35B-00-0000-0D0BD240E
80
D4 550
40E
XHP35B-00-0000-0D0HD440E
D2 510 XHP35B-00-0000-0D0HD240E
90
C2 440
40E
XHP35B-00-0000-0D0UC240E
B4 410 XHP35B-00-0000-0D0UB440E
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
4
XLamp® XHp35.2 LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 23).
• Cree XLamp XHP35.2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
Nominal
CCT
CRI
Minimum
Luminous Flux

3-Step 5-Step
Min Typ Group 
 Group Order Code Group Order Code
3500K
70
E2 590
35E
XHP35B-00-0000-0D0BE235E
D4 550 XHP35B-00-0000-0D0BD435E
D2 510 XHP35B-00-0000-0D0BD235E
80
D4 550
35E
XHP35B-00-0000-0D0HD435E
D2 510 XHP35B-00-0000-0D0HD235E
C4 475 XHP35B-00-0000-0D0HC435E
90
C2 440
35G
XHP35B-00-0000-0D0UC235G
35E
XHP35B-00-0000-0D0UC235E
B4 410 XHP35B-00-0000-0D0UB435G XHP35B-00-0000-0D0UB435E
3000K
70
D4 550
30E
XHP35B-00-0000-0D0BD430E
D2 510 XHP35B-00-0000-0D0BD230E
80
D2 510
30E
XHP35B-00-0000-0D0HD230E
C4 475 XHP35B-00-0000-0D0HC430E
90
C2 440
30G
XHP35B-00-0000-0D0UC230G
30E
XHP35B-00-0000-0D0UC230E
B4 410 XHP35B-00-0000-0D0UB430G XHP35B-00-0000-0D0UB430E
B2 380 XHP35B-00-0000-0D0UB230G XHP35B-00-0000-0D0UB230E
2700K
80
C4 475
27E
XHP35B-00-0000-0D0HC427E
C2 440 XHP35B-00-0000-0D0HC227E
90
B4 410
27G
XHP35B-00-0000-0D0UB427G
27E
XHP35B-00-0000-0D0UB427E
B2 380 XHP35B-00-0000-0D0UB227G XHP35B-00-0000-0D0UB227E
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS (TJ
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
5
XLamp® XHp35.2 LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 23).
• Cree XLamp XHP35.2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS (TJ
The following table provides order codes for XLamp XHP35.2 LEDs. For a complete description of how the ux and chromaticity groups
are reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 21).
Nomimal
CCT Chromaticity Regions
CRI
Minimum
Luminous Flux
 Order Code
Min Typ Group 

7000K
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U
068 E2 590 XHP35B-00-0000-0D00E20DT
D4 550 XHP35B-00-0000-0D00D40DT
70 E2 590 XHP35B-00-0000-0D0BE20DT
D4 550 XHP35B-00-0000-0D0BD40DT
80 D4 550 XHP35B-00-0000-0D0HD40DT
D2 510 XHP35B-00-0000-0D0HD20DT
90
C4 475 XHP35B-00-0000-0D0UC40DT
C2 440 XHP35B-00-0000-0D0UC20DT
B4 410 XHP35B-00-0000-0D0UB40DT
6500K 1A, 1B, 1C, 1D
068 E2 590 XHP35B-00-0000-0D00E20E1
D4 550 XHP35B-00-0000-0D00D40E1
70 E2 590 XHP35B-00-0000-0D0BE20E1
D4 550 XHP35B-00-0000-0D0BD40E1
80 D4 550 XHP35B-00-0000-0D0HD40E1
D2 510 XHP35B-00-0000-0D0HD20E1
90
C4 475 XHP35B-00-0000-0D0UC40E1
C2 440 XHP35B-00-0000-0D0UC20E1
B4 410 XHP35B-00-0000-0D0UB40E1
6000K
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U,
2A, 2B, 2C, 2D,
2R, 2S, 2T, 2U
068 E2 590 XHP35B-00-0000-0D00E20DV
D4 550 XHP35B-00-0000-0D00D40DV
70 E2 590 XHP35B-00-0000-0D0BE20DV
D4 550 XHP35B-00-0000-0D0BD40DV
80 D4 550 XHP35B-00-0000-0D0HD40DV
D2 510 XHP35B-00-0000-0D0HD20DV
90
C4 475 XHP35B-00-0000-0D0UC40DV
C2 440 XHP35B-00-0000-0D0UC20DV
B4 410 XHP35B-00-0000-0D0UB40DV
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
6
XLamp® XHp35.2 LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 23).
• Cree XLamp XHP35.2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
Nomimal
CCT Chromaticity Regions
CRI
Minimum
Luminous Flux
 Order Code
Min Typ Group 

5700K 2A, 2B, 2C, 2D
068 E2 590 XHP35B-00-0000-0D00E20E2
D4 550 XHP35B-00-0000-0D00D40E2
70 E2 590 XHP35B-00-0000-0D0BE20E2
D4 550 XHP35B-00-0000-0D0BD40E2
80 D4 550 XHP35B-00-0000-0D0HD40E2
D2 510 XHP35B-00-0000-0D0HD20E2
90
C4 475 XHP35B-00-0000-0D0UC40E2
C2 440 XHP35B-00-0000-0D0UC20E2
B4 410 XHP35B-00-0000-0D0UB40E2
5000K 3A, 3B, 3C, 3D
068 E2 590 XHP35B-00-0000-0D00E20E3
D4 550 XHP35B-00-0000-0D00D40E3
70 E2 590 XHP35B-00-0000-0D0BE20E3
D4 550 XHP35B-00-0000-0D0BD40E3
80 D4 550 XHP35B-00-0000-0D0HD40E3
D2 510 XHP35B-00-0000-0D0HD20E3
90
C4 475 XHP35B-00-0000-0D0UC40E3
C2 440 XHP35B-00-0000-0D0UC20E3
B4 410 XHP35B-00-0000-0D0UB40E3
4500K 4A, 4B, 4C, 4D
068 E2 590 XHP35B-00-0000-0D00E20E4
D4 550 XHP35B-00-0000-0D00D40E4
70 E2 590 XHP35B-00-0000-0D0BE20E4
D4 550 XHP35B-00-0000-0D0BD40E4
80 D4 550 XHP35B-00-0000-0D0HD40E4
D2 510 XHP35B-00-0000-0D0HD20E4
90
C4 475 XHP35B-00-0000-0D0UC40E4
C2 440 XHP35B-00-0000-0D0UC20E4
B4 410 XHP35B-00-0000-0D0UB40E4
FLUX CHARACTERISTICS, ANSI ORDER CODES AND BINS (TJ
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
7
XLamp® XHp35.2 LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 23).
• Cree XLamp XHP35.2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
Nomimal
CCT Chromaticity Regions
CRI
Minimum
Luminous Flux
 Order Code
Min Typ Group 

4000K 5A, 5B, 5C, 5D
068
E2 590 XHP35B-00-0000-0D00E20E5
D4 550 XHP35B-00-0000-0D00D40E5
D2 510 XHP35B-00-0000-0D00D20E5
70
E2 590 XHP35B-00-0000-0D0BE20E5
D4 550 XHP35B-00-0000-0D0BD40E5
D2 510 XHP35B-00-0000-0D0BD20E5
80 D4 550 XHP35B-00-0000-0D0HD40E5
D2 510 XHP35B-00-0000-0D0HD20E5
90 C2 440 XHP35B-00-0000-0D0UC20E5
B4 410 XHP35B-00-0000-0D0UB40E5
3500K 6A, 6B, 6C, 6D
70
E2 590 XHP35B-00-0000-0D0BE20E6
D4 550 XHP35B-00-0000-0D0BD40E6
D2 510 XHP35B-00-0000-0D0BD20E6
80
D4 550 XHP35B-00-0000-0D0HD40E6
D2 510 XHP35B-00-0000-0D0HD20E6
C4 475 XHP35B-00-0000-0D0HC40E6
90 C2 440 XHP35B-00-0000-0D0UC20E6
B4 410 XHP35B-00-0000-0D0UB40E6
3000K 7A, 7B, 7C, 7D
70 D4 550 XHP35B-00-0000-0D0BD40E7
D2 510 XHP35B-00-0000-0D0BD20E7
80 D2 510 XHP35B-00-0000-0D0HD20E7
C4 475 XHP35B-00-0000-0D0HC40E7
90
C2 440 XHP35B-00-0000-0D0UC20E7
B4 410 XHP35B-00-0000-0D0UB40E7
B2 380 XHP35B-00-0000-0D0UB20E7
2700K 8A, 8B, 8C, 8D
80 C4 475 XHP35B‑00‑0000‑0D0HC40E8
C2 440 XHP35B‑00‑0000‑0D0HC20E8
90 B4 410 XHP35B‑00‑0000‑0D0UB40E8
B2 380 XHP35B‑00‑0000‑0D0UB20E8
FLUX CHARACTERISTICS, ANSI ORDER CODES AND BINS (TJ
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
8
XLamp® XHp35.2 LED
RELATIVE SPECTRAL POWER DISTRIBUTION
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IFm
Relative Spectral Power
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
6000 K, 70 CRI
5000 K, 70 CRI
3000 K, 80 CRI
Relative Flux Output vs. Junction Temperature
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
9
XLamp® XHp35.2 LED
ELECTRICAL CHARACTERISTICS (TJ
RELATIVE FLUX VS. CURRENT (TJ
Electrical Characteristics (Tj = 85°C)
0
175
350
525
700
875
1050
9.8 10.0 10.2 10.4 10.6 10.8 11.0 11.2 11.4 11.6 11.8 12.0 12.2
Forward Current (mA)
Forward Voltage (V)
Relative Intensity vs. Current (Tj = 85°C)
0%
25%
50%
75%
100%
125%
150%
175%
200%
225%
250%
0175 350 525 700 875 1050
Relative Luminous Flux
Forward Current (mA)
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
10
XLamp® XHp35.2 LED


Relative Chromaticity Vs. Current, WW
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
0175 350 525 700 875 1050
Current (mA)
ΔCCx
ΔCCy
Relative Chromaticity Vs. Temperature WW
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
25 50 75 100 125 150
Tsp (°C)
ΔCCx
ΔCCy
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
11
XLamp® XHp35.2 LED
TYPICAL SPATIAL DISTRIBUTION
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
Typical Spatial Radiation Pattern
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
Thermal Design
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 2°C/W
Rj-a = 4°C/W
Rj-a = 6°C/W
Rj-a = 8°C/W
XHP35 High
Intensity
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
12
XLamp® XHp35.2 LED
PERFORMANCE GROUPS – LUMINOUS FLUX (TJ
XLamp XHP35.2 LEDs are tested for luminous ux and placed into one of the following luminous‑ux groups.
Group Code Minimum Luminous Flux Maximum Luminous Flux
A2 330 355
A4 355 380
B2 380 410
B4 410 440
C2 440 475
C4 475 510
D2 510 550
D4 550 590
E2 590 635
E4 635 680
PERFORMANCE GROUPS – CHROMATICITY
XLamp XHP35.2 LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.
EasyWhite Color Temperatures – 3-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle

x y a b
35G 3500K 0.4073 0.3917 0.00927 0.00414 54.0
30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2
27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5
EasyWhite Color Temperatures – 5-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle

x y a b
57E 5700K 0.3287 0.3417 0.01230 0.00600 72.0
50E 5000K 0.3447 0.3553 0.01400 0.00520 65.0
45E 4500K 0.3611 0.3658 0.01420 0.00550 61.5
40E 4000K 0.3818 0.3797 0.01565 0.00670 53.7
35E 3500K 0.4073 0.3917 0.01545 0.00690 54.0
30E 3000K 0.4338 0.4030 0.01390 0.00680 53.2
27E 2700K 0.4577 0.4099 0.01350 0.00700 48.5
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
13
XLamp® XHp35.2 LED
ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y
7000 K
0A0
0.2950 0.2970
7000 K
0R0
0.2980 0.2880
0.2920 0.3060 0.2950 0.2970
0.2984 0.3133 0.3009 0.3042
0.3009 0.3042 0.3037 0.2937
0B0
0.2920 0.3060
0S0
0.2895 0.3135
0.2895 0.3135 0.2870 0.3210
0.2962 0.3220 0.2937 0.3312
0.2984 0.3133 0.2962 0.3220
0C0
0.2984 0.3133
0T0
0.2962 0.3220
0.2962 0.3220 0.2937 0.3312
0.3028 0.3304 0.3005 0.3415
0.3048 0.3207 0.3028 0.3304
0D0
0.2984 0.3133
0U0
0.3037 0.2937
0.3048 0.3207 0.3009 0.3042
0.3068 0.3113 0.3068 0.3113
0.3009 0.3042 0.3093 0.2993
ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y
6500 K
1A0
0.3048 0.3207
6500 K
1R0
0.3068 0.3113
0.3130 0.3290 0.3144 0.3186
0.3144 0.3186 0.3161 0.3059
0.3068 0.3113 0.3093 0.2993
1B0
0.3028 0.3304
1S0
0.3005 0.3415
0.3115 0.3391 0.3099 0.3509
0.3130 0.3290 0.3115 0.3391
0.3048 0.3207 0.3028 0.3304
1C0
0.3115 0.3391
1T0
0.3099 0.3509
0.3205 0.3481 0.3196 0.3602
0.3213 0.3373 0.3205 0.3481
0.3130 0.3290 0.3115 0.3391
1D0
0.3130 0.3290
1U0
0.3144 0.3186
0.3213 0.3373 0.3221 0.3261
0.3221 0.3261 0.3231 0.3120
0.3144 0.3186 0.3161 0.3059

Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
14
XLamp® XHp35.2 LED
ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y
5700 K
2A0
0.3215 0.3350
5700 K
2R0
0.3222 0.3243
0.3290 0.3417 0.3290 0.3300
0.3290 0.3300 0.3290 0.3180
0.3222 0.3243 0.3231 0.3120
2B0
0.3207 0.3462
2S0
0.3196 0.3602
0.3290 0.3538 0.3290 0.3690
0.3290 0.3417 0.3290 0.3538
0.3215 0.3350 0.3207 0.3462
2C0
0.3290 0.3538
2T0
0.3290 0.3690
0.3376 0.3616 0.3381 0.3762
0.3371 0.3490 0.3376 0.3616
0.3290 0.3417 0.3290 0.3538
2D0
0.3290 0.3417
2U0
0.3290 0.3300
0.3371 0.3490 0.3366 0.3369
0.3366 0.3369 0.3361 0.3245
0.3290 0.3300 0.3290 0.3180
ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y
5000 K
3A0
0.3371 0.3490
4500 K
4A0
0.3530 0.3597
0.3451 0.3554 0.3615 0.3659
0.3440 0.3427 0.3512 0.3465
0.3366 0.3369 0.3515 0.3487
3B0
0.3376 0.3616
4B0
0.3548 0.3736
0.3463 0.3687 0.3641 0.3804
0.3451 0.3554 0.3530 0.3597
0.3371 0.3490 0.3533 0.3620
3C0
0.3463 0.3687
4C0
0.3641 0.3804
0.3551 0.3760 0.3736 0.3874
0.3533 0.3620 0.3702 0.3722
0.3451 0.3554 0.3615 0.3659
3D0
0.3451 0.3554
4D0
0.3615 0.3659
0.3533 0.3620 0.3702 0.3722
0.3515 0.3487 0.3670 0.3578
0.3440 0.3427 0.3590 0.3521

Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
15
XLamp® XHp35.2 LED
ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y
4000 K
5A0
0.3670 0.3578
3500 K
6A0
0.3889 0.3690
0.3702 0.3722 0.3941 0.3848
0.3825 0.3798 0.4080 0.3916
0.3783 .3646 0.4017 0.3751
5B0
0.3702 0.3722
6B0
0.3941 0.3848
0.3736 0.3874 0.3996 0.4015
0.3869 0.3958 .04146 0.4089
0.3825 0.3798 .04080 0.3916
5C0
0.3825 0.3798
6C0
0.4080 0.3916
0.3869 0.3958 0.4146 0.4089
.04006 0.4044 0.4299 0.4165
0.3950 0.3875 0.4221 0.3984
5D0
0.3783 0.3646
6D0
0.4017 0.3751
0.3825 0.3798 0.4080 0.3916
0.3950 0.3875 0.4221 0.3984
0.3898 0.3716 0.4147 0.3814
ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y
3000 K
7A0
0.4147 0.3814
2700 K
8A0
0.4373 0.3893
0.4221 0.3984 0.4465 0.4071
0.4342 0.4028 0.4582 0.4099
0.4259 0.3853 0.4483 0.3919
7B0
0.4221 0.3984
8B0
0.4465 .04071
0.4299 0.4165 0.4562 0.4260
0.4430 0.4212 0.4687 0.4289
0.4342 .04028 .04582 0.4099
7C0
0.4342 0.4028
8C0
0.4582 0.4099
0.4430 0.4212 0.4687 0.4289
0.4562 0.4260 0.4813 0.4319
0.4465 0.4071 0.4700 0.4126
7D0
0.4259 0.3853
8D0
0.4483 0.3919
0.4342 0.4028 0.4582 0.4099
0.4465 0.4071 0.4700 0.4126
0.4373 0.3893 0.4593 0.3944

Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
16
XLamp® XHp35.2 LED
CREE’S EASYWHITE® CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE
ANSI Cool White
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
17
XLamp® XHp35.2 LED
CREE’S EASYWHITE® CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE - CONTINUED
ANSI Neutral White and ANSI Warm White
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
5700 K
3A
3B
3C
3D
4A
4B
4C
4D
5A
5B
5C
5D
6A
6B
6C
6D
7A
7B
7C
7D 8A
8B 8C
8D
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
18
XLamp® XHp35.2 LED
CREE’S EASYWHITE® CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE - CONTINUED
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
5700 K
6500 K
8000 K
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.27
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI C78.377 Quadrangle
EasyWhite 5-Step
EasyWhite 3-Step
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
19
XLamp® XHp35.2 LED
CREE’S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
1R
1S
1T
1U
2R
2S
2T
2U
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
DT
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
1R
1S
1T
1U
2R
2S
2T
2U
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
DV
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E1
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E2
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
20
XLamp® XHp35.2 LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D
5A
5B
5C
5D
6A
6B
6C
6D
7A
7B
7C
7D
8B
8A 8D
8C
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.50
CCy
CCx
E3
E4
E5
E6
E7
E8
ANSI
C78.377A
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
21
XLamp® XHp35.2 LED
BIN AND ORDER CODE FORMATS
Bin codes and order codes for XHP35.2 LEDs are congured in the following manner:
Order Code Bin Code
SSSSSS-BD-GGGG-HJKLMMNNN
Series
XHP35B = XHP35.2
Internal code
Minimum luminous flux group
Chromaticity group
CRI specificat ion
0 = No minimum CRI
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Vf class
Configuration
B: Version
0 = Default
D: Reel siz e
SSSSSS-B-NNN-MMM-JK-L-PP
Series
XHP35B = XHP35.2
Chromaticity group
Luminous flux group
Voltage performance group
CRI specification
0 = No minimum CRI
B = 70 CRI minimum
H = 80 CRI m inimum
U = 90 CRI minimum
Internal code
Vf class
Version
0 = Default
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
22
XLamp® XHp35.2 LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XHP35.2 LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As a
general guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder
paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp)1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax)170 °C
Preheat: Time (tsmin to tsmax)65‑150 seconds
Time Maintained Above: Temperature (TL)217 °C
Time Maintained Above: Time (tL)45‑90 seconds
Peak/Classication Temperature (Tp) 235 ‑ 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20‑40 seconds
Ramp-Down Rate 1 ‑ 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
IPC/JEDEC J‑STD‑020C
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
23
XLamp® XHp35.2 LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.

Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long‑term reliability for XLamp
LEDs and details of Cree’s pre‑release qualication testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM‑80‑08 and TM‑21‑11 methods for collecting long‑term data and extrapolating LED lumen maintenance.
For information on the specic LM‑80 data sets available for this LED, refer to the public LM‑80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture‑barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XHP35.2 LEDs may be stored as MSL 1 per JEDEC J‑STD‑033, meaning they have unlimited oor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
24
XLamp® XHp35.2 LED
MECHANICAL DIMENSIONS
Thermal vias, if present, are not shown on these drawings.
All dimensions are ±.13mm unless otherwise indicated.
Notes:
• Cree recommends using thermal pad kickouts to maximize component thermal performance.
• Cree recommends using white solder mask material to minimize system optical loss.
* This stencil has been tested and optimized for the avoidance of voiding when using ALPHA® LUMET® P30 Maxrel solder paste. For
other solder pastes, a “window pane” design for the thermal pad stencil may result in a lower voiding percentage. Contact your local
Cree Field Applications Engineer for consultation regarding your specic application.
Bottom View
Top View Side View
3.45
3.45
2.65
3.50 3.30
1.50
1.30
.30
.30 .50
.50
.50
.56
.70
.50
.50
3.30
2.30
1.30
3.30
3.30
3.30
.56
.56
.83
.18
.18
.18
3.30
.18
.50
.50
.56
.29
.43
.09
OPTICAL
REFERENCE
OPTICAL REFERENCE
3.50
R1.85
3.45
3.45
2.65
3.50 3.30
1.50
1.30
.30
.30 .50
.50
.50
.56
.70
.50
.50
3.30
2.30
1.30
3.30
3.30
3.30
.56
.56
.83
.18
.18
.18
3.30
.18
.50
.50
.56
.29
.43
.09
OPTICAL
REFERENCE
OPTICAL REFERENCE
3.50
R1.85
Anode
Side
Recommended Copper Layout Recommended Stencil Openings*
3.45
3.45
2.65
3.50 3.30
1.50
1.30
.30
.30 .50
.50
.50
.56
.70
.50
.50
3.30
2.30
1.30
3.30
3.30
3.30
.56
.56
.83
.18
.18
.18
3.30
.18
.50
.50
.56
.29
.43
.09
OPTICAL
REFERENCE
OPTICAL REFERENCE
3.50
R1.85
3.45
3.45
2.65
3.50 3.30
1.50
1.30
.30
.30 .50
.50
.50
.56
.70
.50
.50
3.30
2.30
1.30
3.30
3.30
3.30
.56
.56
.83
.18
.18
.18
3.30
.18
.50
.50
.56
.29
.43
.09
OPTICAL
REFERENCE
OPTICAL REFERENCE
3.50
R1.85
Recommended Solder Pad

Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
25
XLamp® XHp35.2 LED
TAPE AND REEL
All Cree carrier tapes conform to EIA‑481D, Automated Component Handling Systems Standard.
Except as noted, all dimensions in mm [inches]
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
3456
6 5 4 3 2 1
A
B
C
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6 1/11.000
A
2402-00040
Carrier Tape, XPL
5/16/14 D. CRONIN
.30 [.012]
T
Ao
3.60 [.142]
3.00 [.118]
Ko
3.0 °
3.0 °
3.60 [.142]
Bo
10.25
[.404]
E2
P2
2.00 [.079]
Po
4.00 [.157]
Ø1.50
+.10
-.00
Ø1.50
[.059]
D1
MIN
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
1.75 [.069]
E1
5.50 [.217]F
8.00 [.315]
P
POCKET SIZE
Ao - 3.60 mm [.142"]
Bo - 3.60 mm [.142"]
Ko - 3.00 mm [.118"]
CATHODE SIDE
ANODE SIDE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
3456
6 5 4 3 2 1
A
B
C
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6 1/11.000
A
2402-00040
Carrier Tape, XPL
5/16/14 D. CRONIN
.30 [.012]
T
Ao
3.60 [.142]
3.00 [.118]
Ko
3.0 °
3.0 °
3.60 [.142]
Bo
10.25
[.404]
E2
P2
2.00 [.079]
Po
4.00 [.157]
Ø1.50
+.10
-.00
Ø1.50
[.059]
D1
MIN
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
1.75 [.069]
E1
5.50 [.217]F
8.00 [.315]
P
POCKET SIZE
Ao - 3.60 mm [.142"]
Bo - 3.60 mm [.142"]
Ko - 3.00 mm [.118"]
CATHODE SIDE
ANODE SIDE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
3456
6 5 4 3 2 1
A
B
C
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6 1/11.000
A
2402-00040
Carrier Tape, XPL
5/16/14 D. CRONIN
.30 [.012]
T
Ao
3.60 [.142]
3.00 [.118]
Ko
3.0 °
3.0 °
3.60 [.142]
Bo
10.25
[.404]
E2
P2
2.00 [.079]
Po
4.00 [.157]
Ø1.50
+.10
-.00
Ø1.50
[.059]
D1
MIN
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
1.75 [.069]
E1
5.50 [.217]F
8.00 [.315]
P
POCKET SIZE
Ao - 3.60 mm [.142"]
Bo - 3.60 mm [.142"]
Ko - 3.00 mm [.118"]
CATHODE SIDE
ANODE SIDE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
3456
6 5 4 3 2 1
A
B
C
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6 1/11.000
A
2402-00040
Carrier Tape, XPL
5/16/14 D. CRONIN
.30 [.012]
T
Ao
3.60 [.142]
3.00 [.118]
Ko
3.0 °
3.0 °
3.60 [.142]
Bo
10.25
[.404]
E2
P2
2.00 [.079]
Po
4.00 [.157]
Ø1.50
+.10
-.00
Ø1.50
[.059]
D1
MIN
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
1.75 [.069]
E1
5.50 [.217]F
8.00 [.315]
P
POCKET SIZE
Ao - 3.60 mm [.142"]
Bo - 3.60 mm [.142"]
Ko - 3.00 mm [.118"]
CATHODE SIDE
ANODE SIDE
Loaded Pockets
(500 Lamps)
Leader
400 mm (min.) of
empty pockets with
at least 100 mm
sealed by tape
(50 empty pockets min.)
Trailer
160 mm (min.) of
empty pockets
sealed with tape
(20 pockets min.)
START
END
User Feed Direction
Loaded Pockets
(1,000 Lamps)
Leader
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
START
END
Cathode Side
Anode Side
(denoted by + and circle)
160.0
A
A
B
2.5
±.1
SECTION A-A
SCALE 2 : 1
1.5
±.1
8.0
±.1
4.0
±.1
1.75
±.10
12.0 .0
+
.3
DETAIL B
SCALE 2 : 1
13
mm
7"
Cover Tape
Pocket Tape
User Feed Direction
User Feed Direction
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or vendor
endorsement, sponsorship or association.
26
XLamp® XHp35.2 LED
PACKAGING
Patent Label
(on bottom of box)
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
CREE Bin Code
& Barcode Label
Vacuum-Sealed
Moisture Barrier Bag
Label with Customer
P/N, Qty, Lot #, PO #
Label with Cree Bin
Code, Qty, Lot #
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #