6.0 to 18.0 GHz Power Amplifiers 1/2 and 1 Watt Power Output Amplifiers Gain versus Power Out- Gain 3rd Order Input (1) Frequency Temperature at Noise put for 1dB Flatness Intercept DC current Case Response Gain any Frequency Figure Compression vs Freq Point @ +12V Type (GHz) (dB) (+dB) (dB) (+dBm) (+dB) (+dBm) (mA) Model Min Min Max Max Min Max Typ Typ Power Amplifiers with Guaranteed Specifications from 0C to +55C* CPT-13-6025 6-13 20 1.00 15 27 1.50 34 2320 HPX8 CPT-13-6026 6-13 28 1.25 12 27 1.75 34 2400 HPX8 CPT-13-6027 6-13 36 1.25 11 27 1.75 34 2480 HPX10 CPT-13-6028 6-13 45 1.50 10 27 2.00 34 2560 HPX10 CPT-13-6035 6-13 20 1.00 15 30 1.25 36 3500 HPX8 CPT-13-6036 6-13 28 1.25 12 30 1.50 36 3580 HPX8 CPT-13-6037 6-13 36 1.25 12 30 1.75 36 3660 HPX10 CPT-18-6025 6-18 21 1.00 15 27 1.25 34 2320 HPX8 CPT-18-6026 6-18 27 1.00 12 27 1.50 34 2400 HPX8 CPT-18-6027 6-18 33 1.25 11 27 1.75 34 2480 HPX10 CPT-18-6028 6-18 39 1.25 10 27 2.00 34 2560 HPX10 CPT-18-6035 6-18 21 1.00 16 30 1.25 36 3500 HPX8 CPT-18-6036 6-18 27 1.00 14 30 1.50 36 3580 HPX8 CPT-18-6037 6-18 32 1.25 12 30 1.75 36 3600 HPX10 CPT-18-6038 6-18 37 1.25 12 30 2.00 36 3740 HPX10 CPA-13-6025 6-13 24 - 14 27 1.00 34 2220 HPX8 CPA-13-6026 6-13 34 - 12 27 1.00 34 2300 HPX8 CPA-13-6027 6-13 44 - 9 27 1.25 34 2380 HPX8 CPA-13-6035 6-13 21 - 14 30 1.00 36 3320 HPX8 CPA-13-6036 6-12 31 - 12 30 1.00 36 3400 HPX8 CPA-13-6037 6-12 41 - 12 30 1.25 36 3480 HPX10 CPA-18-6025 6-18 22 - 12 27 1.00 34 2220 HPX8 CPA-18-6026 6-18 28 - 10 ea? 1.25 34 2300 HPX8 CPA-18-6027 6-18 35 - 9 27 1.50 34 2380 HPX8 CPA-18-6028 6-18 42 - 8 27 1.75 34 2460 HPX8 CPA-18-6035 6-18 19 - 15 30 1.00 36 3320 HPX8 CPA-18-6036 6-18 25 - 12 30 1.25 36 3400 HPX8 CPA-18-6037 6-18 32 - 12 30 1.50 36 3480 HPX10 CPA-18-6038 6-18 39 - 12 30 1.75 36 3560 HPX10 SPECIFYING POWER AMPLIFIERS particularly in applications where harmonic and All Celeritek amplifiers have a guaranteed minimum output power at | dB compression as a standard specification. For higher power levels (+27 dBm and above), users should ensure their application requires a | dB compression specification. Considerable savings in cost and DC power consumption can be made if higher gain compression can be tolerated at a given output power level. This applies intermodulation levels are the primary performance requirements. In these cases, it may be preferable to specify minimum power output and harmonics or intermodulation products as a function of dB down from the carrier. Please consult the factory for assistance and typical data. * 1/2 and 1.0 watt P, amplifiers are available for the full military temperature range on special order.