For airbag module, 105℃℃
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Capacitance code (ex. 1,000μF:102, 11,000μF:113)
(1/2)
Please refer to "Product code guide (radial lead type)"
L' 15min. 4min.
φD'
φd
F±0.5
Vent
Sleeve (PET : Dark blue)
◆SPECIFICATIONS
Category
Temperature Range
Rated Voltage Range
Capacitance Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tan
δ
)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Items
-
55 to +105℃
25 & 35Vdc
1,000 to 11,000μF
0 to +30% (A)
I=0.01CV
Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V)
Rated voltage (Vdc)
tan
δ
(Max.)
When nominal capacitance exceeds 1,000μF, add 0.02 to the value above for each 1,000μF increase.
Rated voltage (Vdc)
Z(
-
55℃)/Z(+20℃)
Impedance at -40℃and 20℃ 100kHz in the STANDARD RATINGS
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃.
Capacitance change ≦±20% of the initial value
D.F. (tan
δ
)≦200% of the initial specified value
Leakage current ≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦±20% of the initial value
D.F. (tan
δ
)≦200% of the initial specified value
Leakage current ≦The initial specified value
Characteristics
25V
0.20
35V
0.16
25V
3
35V
3
(at 20℃, 120Hz)
(at 20℃, 120Hz)
(at 20℃ after 2 minutes)
(at 20℃, 120Hz)
(at 120Hz)
◆DIMENSIONS [mm]
●For airbag application
●High capacitance, low impedance, and good low temperature behavior
●Endurance with ripple current : 5,000 hours at 105℃
●Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
●RoHS Compliant
12.5
0.6
5.0F
L'
16
0.8
7.5
18
0.8
7.5
φD+0.5max.
L+1.5max.
14.5
0.8
7.5
◆PART NUMBERING SYSTEM
Gas escape end seal
●Terminal Code : E
Supplement code
Size code
Capacitance tolerance code
Lead forming·taping code
Terminal code
Voltage code (ex. 16V:160, 35V:350)
Series code
Category
E L B G A A A EA A A A A A A A SA
1342 678910 1312518171611 1514
φD
φd
φD'
LB
G
S
e
r
i
e
s
CAT. No. E1001M
Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.
For airbag module, 105℃
120
0.60
0.75
0.85
1k
0.87
0.90
0.95
10k
0.95
0.95
0.98
100k
1.00
1.00
1.00
Capacitance (µF)
Frequency (Hz)
1,000 to 2,000
2,100 to 3,800
4,000 to 11,000
WV
(Vdc)
Case size
φD
×
L(mm)
Impedance (
Ω
max/100kHz) Rated ripple current
(mArms/105℃,100kHz) Part No.
20℃ -40℃
25
1,700 12.5×20 0.057 0.29 1,700 ELBG250E□□172AK20S
2,400 12.5×25 0.045 0.23 2,000 ELBG250E□□242AK25S
2,400 14.5×20 0.051 0.26 2,000 ELBG250E□□242AU20S
2,800 12.5×30 0.039 0.20 2,300 ELBG250E□□282AK30S
3,000 16×20 0.044 0.22 2,250 ELBG250E□□302AL20S
3,400 14.5×25 0.041 0.21 2,400 ELBG250E□□342AU25S
3,500 12.5×35 0.033 0.17 2,700 ELBG250E□□352AK35S
4,200 16×25 0.033 0.17 2,600 ELBG250E□□422AL25S
4,200 18×20 0.042 0.21 2,500 ELBG250E□□422AM20S
4,500 12.5×40 0.027 0.14 3,100 ELBG250E□□452AK40S
4,600 14.5×31.5 0.032 0.16 2,700 ELBG250E□□462AUN3S
5,400 14.5×35.5 0.028 0.14 3,100 ELBG250E□□542AUP1S
5,600 16×31.5 0.026 0.13 3,200 ELBG250E□□562ALN3S
6,000 18×25 0.030 0.15 2,800 ELBG250E□□602AM25S
6,400 14.5×40 0.025 0.13 3,400 ELBG250E□□642AU40S
6,600 16×35.5 0.023 0.12 3,500 ELBG250E□□662ALP1S
7,800 16×40 0.021 0.11 3,800 ELBG250E□□782AL40S
7,900 18×31.5 0.024 0.12 3,500 ELBG250E□□792AMN3S
9,200 18×35.5 0.022 0.11 3,700 ELBG250E□□922AMP1S
11,000 18×40 0.020 0.10 4,000 ELBG250E□□113AM40S
35
1,000 12.5×20 0.057 0.29 1,700 ELBG350E□□102AK20S
1,400 12.5×25 0.045 0.23 2,000 ELBG350E□□142AK25S
1,400 14.5×20 0.051 0.26 2,000 ELBG350E□□142AU20S
1,600 12.5×30 0.039 0.20 2,300 ELBG350E□□162AK30S
1,800 16×20 0.044 0.22 2,250 ELBG350E□□182AL20S
2,000 14.5×25 0.041 0.21 2,400 ELBG350E□□202AU25S
2,100 12.5×35 0.033 0.17 2,700 ELBG350E□□212AK35S
2,500 16×25 0.033 0.17 2,600 ELBG350E□□252AL25S
2,500 18×20 0.042 0.21 2,500 ELBG350E□□252AM20S
2,700 12.5×40 0.027 0.14 3,100 ELBG350E□□272AK40S
2,800 14.5×31.5 0.032 0.16 2,700 ELBG350E□□282AUN3S
3,200 14.5×35.5 0.028 0.14 3,100 ELBG350E□□322AUP1S
3,400 16×31.5 0.026 0.13 3,200 ELBG350E□□342ALN3S
3,600 18×25 0.030 0.15 2,800 ELBG350E□□362AM25S
3,800 14.5×40 0.025 0.13 3,400 ELBG350E□□382AU40S
4,000 16×35.5 0.023 0.12 3,500 ELBG350E□□402ALP1S
4,700 16×40 0.021 0.11 3,800 ELBG350E□□472AL40S
4,800 18×31.5 0.024 0.12 3,500 ELBG350E□□482AMN3S
5,600 18×35.5 0.022 0.11 3,700 ELBG350E□□562AMP1S
6,700 18×40 0.020 0.10 4,000 ELBG350E□□672AM40S
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
◆STANDARD RATINGS
□□ : Enter the appropriate lead forming or taping code.
◆RATED RIPPLE CURRENT MULTIPLIERS
●Frequency Multipliers
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Cap
(µF)
(2/2)
LBG
S
e
ri
e
s
CAT. No. E1001M
Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.
