FPS1000 Series 1000W Front End Power Supplies 1U high Up to 3000W (3 units) in 19" rack Hotswap capable (Oring diodes built in) Low Cost Key Market Segments & Applications Power for Distributed Power Architecture Factory Automation Features and Benefits Feature Benefit 1U high Hotswap capable High efficiency Full array of signals Utilizes less cabinet space Suitable for N+1 redundancy Less heat dissipated in system Easier system monitoring Specifications MODELS ITEMS Output Voltage Range V Output Current A Line Regulation Load Regulation Output Noise mV Overvoltage Protection V Overcurrent Protection Load Sharing Remote Sense I2C Monitoring Signals (opto isolated) Remote On/Off Remote Adjustment Auxiliary Output AC Input Leakage Current mA Inrush Current A Hold up time (100VAC input) Efficiency (typ) 100/200VAC Power factor Correction Immunity EMC (conducted and radiated) Operating Temperature C Storage Temperature C Cooling Humidity Shock & Vibration Safety Agency Input / Output Connector Front panel indicators Size (LxWxH) in Weight g Warranty yr 24V Nominal 48V Nominal 21.5 - 29V 40A 43 - 58V 21A <0.4% <0.8% 200mV 31 to 34V 300mV 62 to 66V 105 - 125%, Constant Current type Single wire current sharing, up to 8 units Compenstates for 1V on each output lead Optional (Specify /S) DC OK, AC Fail, and Overtemperature warning, high on fail On: 0 - 0.6V or short, Off: 2- 15V or open Via trim pin on output connector 11.2-12.5VDC 0.25A 85 - 265VAC, 47 - 63Hz <1mA at 230VAC input <40A 20ms typical (800W loading) 84 / 86% 85 / 88% EN61000-3-2 class A (20-100% load), >0.98 at full load EN61000-4-2, -3, -4, -5, -6, -11 EN55022, level B, FCC Class B 0 to +50C -30 to +85C Two internal fans, airflow from front to back (variable speed) Operating: 10 - 90% RH, Storage: 10 - 95% RH (non condensing) Meets ETS 300 019 UL60950, EN60950, CE Mark Positronic PCIB24W9M400A1 (Mating #PCIB24W9F400A1) AC OK, DC OK, DC Fail Stand alone: 1.61 x 5 x 11.4"; Rack: 1.72 x 19 x 13.8" 2000 Two Years 3055 Del Sol Blvd * San Diego, CA 92154 * 1-800-LAMBDA-4 FPS1000 Series FPSS1U Outline Drawing /P Version shown SIGNALS AND CONTROL CONNECTOR D-TYPE 25 PINS (SEE NOTE 1.) 379.0 65.4 24.0 MODULE "A" 56.5 24.0 2 MODULE "B" MODULE "C" 14.0 27.8 225.5 I C INTERFACE ADDRESS SWITCH (SEE NOTE 4) -V OUTPUT BUS BAR +V SEE NOTE 2. SEE NOTE 3. 0.5 0.5 466.0 6.0 24.5 43.6 0.4 0.0 482.8 31.7 351.0 25.0 384.01.0 0.0 440.0 20.0 FPS1000 Outline Drawing Model Number Other Lambda Industrial Products X, SX, PAQ, PAH, PAF TL DC-DC Converters 2U 500 to 2500W Front End AC-DC Front AC Input Configuration FPS100024/P* FPS100024/PS* FPS100048/P FPS100048/PS FPSS1U/P Rear AC Input Configuration FPS100024* FPS100024/S* FPS100048 FPS100048/S FPSS1U Output Output Maximum I2C Voltage Current Power Interface 24V 40A 960W No 24V 40A 960W Yes 48V 21A 1008W No 48V 21A 1008W Yes Rack (3 slot), contains two blanking panels Output Output Maximum I2C Voltage Current Power Interface 24V 40A 960W No 24V 40A 960W Yes 48V 21A 1008W No 48V 21A 1008W Yes Rack (3 slot), contains two blanking panels * Available Dec 2004/Jan 2005 For Additional Information, please visit www.lambdapower.com/products/fps-series.htm 3055 Del Sol Blvd * San Diego, CA 92154 * 1-800-LAMBDA-4 Revision A4: Dec 2004