Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
EEE-41 –
A±0.2
W
()Reference size
L
φD±0.5
H
B±0.2
(I)
K
(P) (I)
+
0.3 max.
Pressure Relief (φ10 and larger)
22
FKj
Capacitance (µF)
Rated Voltage Mark
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Lot number
Negative polarity
marking (–)
3300
FKj
Capacitance (µF)
Rated Voltage Mark
Series identification
Lot number
Negative polarity
marking (–)
Features
Endurance: 2000 h to 5000 h at 105 °C
Low impedance (40 % to 60 % less than FC series)
Miniaturized (30 % to 50 % less than FC series)
Vibration-proof product is available upon request. (φ8 mm and larger)
RoHS directive compliant
Surface Mount Type
Series: FK Type: V
Specifi cations
Category Temp. Range 55 °C to +105 °C
Rated W.V.Range 6.3 V.DC to 100 V.DC
Nominal Cap.Range 3.3 µF to 6800 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
tan δPlease see the attached standard products list
Characteristics
at Low Temperature
W.V. (V) 6.3 10 16 25 35 50 63 80 100
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 222222222
Z(–40 °C)/Z(+20 °C) 333333333
Z(–55 °C)/Z(+20 °C) 444333333
Endurance
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits. ( > φ12.5 and suffi x “G” in φ8҂10.2, φ10҂10.2 are 5000 hours)
Capacitance change ±30 % of initial measured value (Sufx “G” is 35 %)
tan δ< 200 % of initial specifi ed value (Suf x “G” is 300 %)
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ< initial specied value
DC leakage current < initial specifi ed value
Di men sions in mm (not to scale) Marking
Example:6.3 V 22 µF, 6.3 V 3300 µF
Marking color : BLACK
< φ10
Size
code DLA,BH IWPK
B4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 - 0.2
C5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 - 0.2
D6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 - 0.2
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 - 0.2
E8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 - 0.2
F8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.3
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.3
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.3
> φ12.5
+ 1.5
+ 1.5
+ 1.5
+ 1.5
+ 1.5
Frequency (Hz)
50, 60 120 1 k 10 k 100 k to
Correction factor 0.70 0.75 0.90 0.95 1.00
Frequency correction factor for ripple current
j 6.3 V
A 10 V
C 16 V
E 25 V
V 35 V
Rated Voltage Mark
H 50 V
J 63 V
K 80 V
2A 100 V
(Unit : mm)
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-42 –
Standard Prod ucts
W.V. Cap.
20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length Size
Code
Ripple
Current
(100 kHz)
(+105 °C)
Impedance
(100 kHz)
(+20 °C)
tan δ
(120 Hz)
(+20 °C)
Taping
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(pcs)
6.3
22 4 5.8 B 90 1.35 0.26 EEEFK0J220R (1) 2000
47 45.8(B)901.350.26
EEEFK0J470UR (1) 2000
55.8C1600.70 0.26 EEEFK0J470R (1) 1000
100 55.8(C)1600.70 0.26 EEEFK0J101UR (1) 1000
6.3 5.8 D 240 0.36 0.26 EEEFK0J101P (1) 1000
220 6.3 5.8 D 2400.360.26
EEEFK0J221P (1) 1000
330 6.3 7.7 D8 280 0.34 0.26 EEEFK0J331XP (1) 900
86.2E3000.26 0.26 EEEFK0J331P (2) 1000
470 8 10.2 F 600 0.16 0.26 EEEFK0J471P (2) 500
1000 8 10.2 F 600 0.16 0.26 EEEFK0J102P (2) 500
1500 10 10.2 G 850 0.08 0.26 EEEFK0J152P (2) 500
3300 12.5 13.5 H13 1100 0.06 0.30 EEVFK0J332Q (3) 200
6800 16 16.5 J16 1800 0.035 0.36 EEVFK0J682M (3) 125
10
22 4 5.8 B 90 1.35 0.19 EEEFK1A220R (1) 2000
33 45.8(B)901.350.19
EEEFK1A330UR (1) 2000
55.8C1600.70 0.19 EEEFK1A330R (1) 1000
150 6.3 5.8 D 2400.36 0.19
EEEFK1A151P (1) 1000
220 6.3 7.7 D8 280 0.34 0.19 EEEFK1A221XP (1) 900
86.2E3000.26 0.19 EEEFK1A221P (2) 1000
330 8 10.2 F 600 0.16 0.19 EEEFK1A331P (2) 500
470 8 10.2 F 600 0.16 0.19 EEEFK1A471P (2) 500
680 8 10.2 F 600 0.16 0.19 EEEFK1A681P (2) 500
1000 10 10.2 G 850 0.08 0.19 EEEFK1A102P (2) 500
2200 12.5 13.5 H13 1100 0.06 0.21 EEVFK1A222Q (3) 200
4700 16 16.5 J16 1800 0.035 0.25 EEVFK1A472M (3) 125
6800 18 16.5 K16 2060 0.033 0.29 EEVFK1A682M (3) 125
16
10 4 5.8 B 90 1.35 0.16 EEEFK1C100R (1) 2000
22 45.8(B)901.350.16
EEEFK1C220UR (1) 2000
55.8C1600.70 0.16 EEEFK1C220R (1) 1000
47 55.8(C)1600.70 0.16 EEEFK1C470UR (1) 1000
6.3 5.8 D 240 0.36 0.16 EEEFK1C470P (1) 1000
68 6.3 5.8 D 240 0.36 0.16 EEEFK1C680P (1) 1000
100 6.3 5.8 D 2400.36 0.16
EEEFK1C101P (1) 1000
150 6.3 7.7 D8 280 0.34 0.16 EEEFK1C151XP (1) 90 0
220 6.3 7.7 D8 280 0.34 0.16 EEEFK1C221XP (1) 900
86.2E3000.26 0.16 EEEFK1C221P (2) 1000
330 8 10.2 F 600 0.16 0.16 EEEFK1C331P (2) 500
470 8 10.2 F 600 0.16 0.16 EEEFK1C471P (2) 500
680 10 10.2 G 850 0.08 0.16 EEEFK1C681P (2) 500
1500 12.5 13.5 H13 1100 0.06 0.16 EEVFK1C152Q (3) 200
3300 16 16.5 J16 1800 0.035 0.20 EEVFK1C332M (3) 125
4700 18 16.5 K16 2060 0.033 0.22 EEVFK1C472M (3) 125
25
10 4 5.8 B 90 1.35 0.14 EEEFK1E100R (1) 2000
22 5 5.8 C 160 0.70 0.14 EEEFK1E220R (1) 1000
33 55.8(C)1600.70 0.14 EEEFK1E330UR (1) 1000
6.3 5.8 D 240 0.36 0.14 EEEFK1E330P (1) 1000
47 6.3 5.8 D 240 0.36 0.14 EEEFK1E470P (1) 1000
68 6.3 5.8 D 240 0.36 0.14 EEEFK1E680P (1) 1000
100 6.3 7.7 D8 280 0.34 0.14 EEEFK1E101XP (1) 90 0
86.2E3000.26 0.14 EEEFK1E101P (2) 1000
150 8 10.2 F 600 0.16 0.14 EEEFK1E151P (2) 500
220 8 10.2 F 600 0.16 0.14 EEEFK1E221P (2) 500
330 8 10.2 F 600 0.16 0.14 EEEFK1E331P (2) 500
470 10 10.2 G 850 0.08 0.14 EEEFK1E471P (2) 500
1000 12.5 13.5 H13 1100 0.06 0.14 EEVFK1E102Q (3) 200
1500 16 16.5 J16 1800 0.035 0.14 EEVFK1E152M (3) 125
2200 16 16.5 J16 1800 0.035 0.16 EEVFK1E222M (3) 125
3300 18 16.5 K16 2060 0.033 0.18 EEVFK1E332M (3) 125
Size code( ):Miniaturization product
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Endurance : 105 °C 2000 h ( > φ12.5 : 5000 h)
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-43 –
Standard Prod ucts
W.V. Cap.
20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length Size
Code
Ripple
Current
(100 kHz)
(+105 °C)
Impedance
(100 kHz)
(+20 °C)
tan δ
(120 Hz)
(+20 °C)
Taping
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(pcs)
35
4.7 4 5.8 B 90 1.35 0.12 EEEFK1V4R7R (1) 2000
10 45.8(B) 901.350.12
EEEFK1V100UR (1) 2000
55.8C1600.70 0.12 EEEFK1V100R (1) 1000
22 5 5.8 C 160 0.70 0.12 EEEFK1V220R (1) 1000
33 6.3 5.8 D 240 0.36 0.12 EEEFK1V330P (1) 1000
47 6.3 5.8 D 240 0.36 0.12 EEEFK1V470P (1) 1000
68 6.3 7.7 D8 280 0.34 0.12 EEEFK1V680XP (1) 9 00
100 6.3 7.7 D8 280 0.34 0.12 EEEFK1V101XP (1) 900
810.2F 6000.16 0.12 EEEFK1V101P (2) 500
150 8 10.2 F 600 0.16 0.12 EEEFK1V151P (2) 500
220 8 10.2 F 600 0.16 0.12 EEEFK1V221P (2) 500
330 10 10.2 G 850 0.08 0.12 EEEFK1V331P (2) 500
470 12.5 13.5 H13 110 0 0.06 0.12 EEVFK1V471Q (3) 200
680 12.5 13.5 H13 110 0 0.06 0.12 EEVFK1V681Q (3) 200
1000 16 16.5 J16 1800 0.035 0.12 EEVFK1V102M (3) 125
1500 16 16.5 J16 1800 0.035 0.12 EEVFK1V152M (3) 125
50
4.7 4 5.8 B 60 2.90 0.10 EEEFK1H4R7R (1) 2000
10 55.8(C) 851.520.10
EEEFK1H100UR (1) 1000
6.3 5.8 D 165 0.88 0.10 EEEFK1H100P (1) 1000
22 6.3 5.8 D 165 0.88 0.10 EEEFK1H220P (1) 1000
33 6.3 7.7 D8 195 0.68 0.10 EEEFK1H330XP (1) 900
86.2E1950.68 0.10 EEEFK1H330P (2) 1000
47 6.3 7.7 D8 195 0.68 0.10 EEEFK1H470XP (1) 900
86.2E1950.68 0.10 EEEFK1H470P (2) 1000
100 8 10.2 F 350 0.34 0.10 EEEFK1H101P (2) 500
150 10 10.2 G 6700.18 0.10 EEEFK1H151P (2) 500
220 10 10.2 G 6700.18 0.10 EEEFK1H221P (2) 500
330 12.5 13.5 H13 900 0.120.10
EEVFK1H331Q (3) 200
390 12.5 13.5 H13 900 0.120.10
EEVFK1H391Q (3) 200
470 16 16.5 J16 1610 0.073 0.10 EEVFK1H471M (3) 125
560 16 16.5 J16 1610 0.073 0.10 EEVFK1H561M (3) 125
680 16 16.5 J16 1610 0.073 0.10 EEVFK1H681M (3) 125
1000 16 16.5 J16 1610 0.073 0.10 EEVFK1H102M (3) 125
63
4.7 5 5.8 C 50 3.00 0.08 EEEFK1J4R7R (1) 1000
10 6.3 5.8 D 801.50 0.08 EEEFK1J100P (1) 1000
22 6.3 7.7 D8 1201.20 0.08 EEEFK1J220XP (1) 90 0
86.2E1201.20 0.08 EEEFK1J220P (2) 1000
33 8 10.2 F 2500.65 0.08 EEEFK1J330P (2) 500
47 8 10.2 F 2500.65 0.08 EEEFK1J470P (2) 500
68 8 10.2 (F) 2500.65 0.08 EEEFK1J680UP (2) 500
100 10 10.2 G 4000.35 0.08 EEEFK1J101P (2) 500
150 12.5 13.5 H13 800 0.16 0.08 EEVFK1J151Q (3) 200
220 12.5 13.5 H13 800 0.16 0.08 EEVFK1J221Q (3) 200
470 16 16.5 J16 1410 0.082 0.08 EEVFK1J471M (3) 125
680 18 16.5 K16 1690 0.08 0.08 EEVFK1J681M (3) 125
80
3.3 5 5.8 C 25 5.00 0.08 EEEFK1K3R3R (1) 1000
4.7 6.3 5.8 D 40 3.00 0.08 EEEFK1K4R7P (1) 1000
10 6.3 7.7 D8 60 2.40 0.08 EEEFK1K100XP (1) 9 00
86.2E 602.40 0.08 EEEFK1K100P (2) 1000
22 8 10.2 F 1301.30 0.08 EEEFK1K220P (2) 500
33 8 10.2 F 1301.30 0.08 EEEFK1K330P (2) 500
47 10 10.2 G 200 0.70 0.08 EEEFK1K470P (2) 500
68 12.5 13.5 H13 500 0.32 0.08 EEVFK1K680Q (3) 200
100 12.5 13.5 H13 500 0.32 0.08 EEVFK1K101Q (3) 200
150 12.5 13.5 H13 500 0.32 0.08 EEVFK1K151Q (3) 200
330 16 16.5 J16 793 0.17 0.08 EEVFK1K331M (3) 125
470 18 16.5 K16 917 0.153 0.08 EEVFK1K471M (3) 125
Size code( ):Miniaturization product
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Endurance : 105 °C 2000 h ( > φ12.5 : 5000 h)
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-44 –
Endurace 5000 h Products
W.V. Cap.
20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length Size
Code
Ripple
Current
(100 kHz)
(+105 °C)
Impedance
(100 kHz)
(+20 °C)
tan δ
(120 Hz)
(+20 °C)
Taping
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(pcs)
6.3
470 8 10.2 F 600 0.16 0.26 EEEFK0J471GP (2) 500
1000 8 10.2 F 600 0.16 0.26 EEEFK0J102GP (2) 500
1500 10 10.2 G 850 0.08 0.26 EEEFK0J152GP (2) 500
10
330 8 10.2 F 600 0.16 0.19 EEEFK1A331GP (2) 500
470 8 10.2 F 600 0.16 0.19 EEEFK1A471GP (2) 500
680 8 10.2 F 600 0.16 0.19 EEEFK1A681GP (2) 500
1000 10 10.2 G 850 0.08 0.19 EEEFK1A102GP (2) 500
16
330 8 10.2 F 600 0.16 0.16 EEEFK1C331GP (2) 500
470 8 10.2 F 600 0.16 0.16 EEEFK1C471GP (2) 500
680 10 10.2 G 850 0.08 0.16 EEEFK1C681GP (2) 500
25
150 8 10.2 F 600 0.16 0.14 EEEFK1E151GP (2) 500
220 8 10.2 F 600 0.16 0.14 EEEFK1E221GP (2) 500
330 8 10.2 F 600 0.16 0.14 EEEFK1E331GP (2) 500
470 10 10.2 G 850 0.08 0.14 EEEFK1E471GP (2) 500
35
100 8 10.2 F 600 0.16 0.12 EEEFK1V101GP (2) 500
150 8 10.2 F 600 0.16 0.12 EEEFK1V151GP (2) 500
220 8 10.2 F 600 0.16 0.12 EEEFK1V221GP (2) 500
330 10 10.2 G 850 0.08 0.12 EEEFK1V331GP (2) 500
50
100 8 10.2 F 350 0.34 0.10 EEEFK1H101GP (2) 500
150 10 10.2 G 6700.18 0.10 EEEFK1H151GP (2) 500
220 10 10.2 G 6700.18 0.10 EEEFK1H221GP (2) 500
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Endurance : 105 °C 5000 h
Standard Prod ucts
W.V. Cap.
20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length Size
Code
Ripple
Current
(100 kHz)
(+105 °C)
Impedance
(100 kHz)
(+20 °C)
tan δ
(120 Hz)
(+20 °C)
Taping
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(pcs)
100
22 8 10.2 F 1301.30 0.07 EEEFK2A220P (2) 500
33 10 10.2 G 200 0.70 0.07 EEEFK2A330P (2) 500
47 12.5 13.5 H13 500 0.32 0.07 EEVFK2A470Q (3) 200
68 12.5 13.5 H13 500 0.32 0.07 EEVFK2A680Q (3) 200
100 16 16.5 J16 793 0.17 0.07 EEVFK2A101M (3) 125
150 16 16.5 J16 793 0.17 0.07 EEVFK2A151M (3) 125
220 18 16.5 K16 917 0.153 0.07 EEVFK2A221M (3) 125
330 18 16.5 K16 917 0.153 0.07 EEVFK2A331M (3) 125
Endurance : 105 °C 2000 h ( > φ12.5 : 5000 h)
Size code( ):Miniaturization product
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
00 Nov. 2012